115 Swivel Part Set – Replacement Hardware for Sling Swivels (UPC 050806004955)
Keep your rifle or shotgun sling secure and mission-ready. The 115 Swivel Part Set (UPC 050806004955) is a practical replacement and repair kit for common sling swivel assemblies—ideal for refreshing worn components, outfitting a new stock, or keeping a spare set in your range bag. Built for hunters, target shooters, and anyone who relies on a sling for hands-free carry, this parts kit helps restore smooth swivel rotation, positive lockup, and a clean, low-profile mount on most sporting firearms.
Whether you’re rebuilding a field-worn swivel, standardizing multiple firearms to the same hardware, or installing a fresh set on a new stock, the 115 Swivel Part Set delivers confidence you can feel every time you shoulder your sling.
Why Choose the 115 Swivel Part Set?
Refresh & Repair in Minutes
Replace tired or damaged swivel hardware to restore quiet, smooth articulation and dependable retention in the field.
Universal, Field-Friendly Design
Built to work with standard sling swivel interfaces on most hunting rifles and shotguns, making it a smart, one-kit solution for mixed collections.
Corrosion-Resistant Finish
Protective coating helps prevent rust from rain, humidity, and salt air—crucial for long seasons and hard use.
Low-Profile, Snag-Resistant Geometry
Slim heads and clean hardware lines reduce snags in brush, pack straps, and blind fabric.
Cost-Effective Upgrade
A budget-smart way to extend the life of your sling system without buying new swivels or a new sling.
UPC: 050806004955 — Use this code to verify the exact 115 Swivel Part Set you need for replacements or inventory.
What’s Typically Included*
Swivel interface hardware for front and/or rear mounting
Studs / screws / posts sized for common stock types
Washers/spacers to fine-tune fit and alignment
Basic install instructions
*Contents may vary by production run. Always verify the included parts match your firearm’s stock material (wood vs. synthetic) and mounting style.
Key Features at a Glance
Product: 115 Swivel Part Set
UPC: 050806004955
Use: Replacement/repair hardware for common sling swivel installations
Fitment: Most sporting rifles & shotguns (stock-dependent)
Finish: Corrosion-resistant, field-ready
Applications: Hunting, range carry, hiking to stand/blind, sling-supported shooting
Installation Overview (High-Level)
Confirm Stock Type: Determine if your stock is wood, laminate, or synthetic (solid vs. hollow fore-end).
Remove Old Hardware: Carefully back out existing studs/screws; keep track of spacers or nuts.
Prep & Align: Mark centerline positions on the fore-end and buttstock toe; use pilot holes for wood stocks.
Mount Hardware: Install studs/posts square to the stock; use backing nuts or inserts for thin or hollow synthetic stocks.
Verify Motion: Attach your swivels and confirm free, quiet rotation with no binding.
Load the Sling: Thread your sling and test carry/shoulder transitions before field use.
If you’re unsure about drilling or backing access on a particular stock, consult a qualified gunsmith.
Compatibility Notes
Rifles: Works for most bolt-action and many semi-auto sporting rifles that accept stock-mounted studs.
Shotguns: Compatible with many pump and semi-auto field guns; some models may require magazine-cap or barrel-band style mounts (sold separately).
Swivels & Slings: Designed to pair with common detachable sling swivels in 1" or 1.25" widths—check your sling size.
Care & Maintenance
Inspect Tightness: Check stud/post tightness and swivel gates periodically—especially after long hikes or temperature swings.
Protect the Finish: Wipe hardware with a lightly oiled cloth after wet hunts to prevent corrosion.
Re-Check Annually: Seasonal expansion/contraction in wood stocks can loosen hardware; re-snug as needed.
Frequently Asked Questions
Q: Will this work on a synthetic stock?
A: Yes—use through-bolt and backing hardware where possible. Avoid wood-screw threads in thin synthetic shells.
Q: Are swivels included?
A: This is a parts/hardware set for swivel mounting. Detachable swivels and slings are typically sold separately.
Q: What sling width is supported?
A: The parts set is intended for standard swivel interfaces used with 1" or 1.25" slings. Confirm your sling width and swivel type.
Q: Do I need special tools?
A: Usually just a drill, correctly sized bits, and a driver. A masking-tape guide and center punch help with precise alignment.
SEO Highlights (Quick Scan)
115 Swivel Part Set 050806004955
Replacement sling swivel hardware for rifles & shotguns
Corrosion-resistant finish, low-profile, snag-resistant design
Fits standard 1" / 1.25" sling swivel interfaces (stock-dependent)
Easy DIY install; ideal for hunting, range use, and field carry
The Bottom Line
When your sling hardware needs a refresh, the 115 Swivel Part Set (UPC 050806004955) is the straightforward fix: durable, corrosion-resistant parts that restore secure mounting and smooth swivel action on most sporting firearms. Install once, carry with confidence, and head into the field with gear that won’t let you down.
The End
