.41 Caliber Cast Pistol Bullets – Semi-Wadcutter (SWC) – 500/ct – Hard-Cast Lead Reloading Components – SKU SS41215SWC

Load confident, clean-cutting revolver rounds with .41 caliber cast SWC bullets—a time-tested favorite for .41 Magnum and .41 Special handloads. The classic Semi-Wadcutter (SWC) profile combines a flat meplat and sharp shoulder for crisp, easy-to-score holes on paper, reliable terminal performance on steel where permitted, and smooth chambering in revolvers. Packed 500 per carton, SKU SS41215SWC gives high-volume shooters and reloaders consistent geometry, uniform bearing surfaces, and a dependable crimp groove for repeatable results.

Why choose SWC for .41? The SWC’s sharp shoulder punches clean, round scoring rings, while its flat nose and balanced bearing surface support stable flight, predictable POI, and effortless seating/crimping—ideal for precision practice, leagues, and field use.

Key Benefits

• Clean scoring & accuracy: Distinct SWC shoulder cuts neat holes on paper, improving line calls and target evaluation.

• Reliable ignition & OAL control: A defined crimp groove supports a firm roll crimp to maintain overall length in magnum recoil and during repeated cylinder rotations.

• Consistent component quality: Tight weight/diameter tolerances help deliver low ES/SD and tight groups across a broad charge range.

• Economical for volume: Hard-cast lead construction keeps cost per round low for extended training without sacrificing reliability.

• Revolver-friendly design: Optimized nose, driving bands, and meplat enhance chambering and alignment in .41 Magnum/Special cylinders.

Ideal Use Cases

• .41 Magnum practice & mid-range loads: Build controllable, accurate rounds for fundamentals and timed drills (within published data).

• .41 Special target recipes: Enjoy soft recoil and match-grade precision with clean scoring impacts.

• Club matches & leagues: SWC profile is trusted for bullseye, PPC, and action-style scoring on cardboard and paper.

• Steel training:* Flat meplat delivers decisive reaction on properly rated steel at appropriate distances.

*Always follow target manufacturer guidance for bullet type, velocity limits, distance, and angle.

Performance Highlights

• Stable flight & POI: Balanced bearing surface and flat meplat promote predictable trajectory and impact.

• User-friendly recoil impulse: SWC loads make sustained practice comfortable while reinforcing sight discipline.

• Easy seating & crimping: Uniform shanks and a pronounced groove streamline setup on common seating/crimp dies.

Specifications (At-a-Glance)

• Caliber: .41 (handgun)

• Bullet Style: Semi-Wadcutter (SWC), plain base

• Construction: Hard-cast lead

• Nominal Diameter: Typically .410–.411" (verify fit to your throats/barrel)

• Count: 500 per carton

• Intended Cartridges: .41 Magnum, .41 Special

• SKU: SS41215SWC

• Nominal Weight: Commonly ~215 grains for this SKU family*

*Exact weight/diameter can vary slightly by lot. Measure and size to your firearm for best accuracy and minimal leading.

Handloading Notes (Read First)

• Use current data: Consult reputable, up-to-date reloading manuals for .41 Magnum/.41 Special SWC data. Start at published starting charges and work up carefully while monitoring pressure signs.

• Fit is everything: Many revolvers deliver best results when bullets are sized ~0.001" over groove diameter and closely matched to cylinder throat size for a light push-fit.

• Crimp correctly: Apply a firm roll crimp into the groove—vital for consistent ignition and to prevent bullet pull under recoil.

• Velocity vs. hardness: Match alloy hardness to intended speed; moderate velocities often yield the cleanest barrels with plain-base cast bullets.

• Chronograph & document: Verify velocity and power factor when changing lots, powders, or primers; record dope and impacts for repeatability.

Safety First: Wear eye protection, label components clearly, and follow all local laws and range rules.

Tips for Best Results

• Throat check: Measure cylinder throats and select sizing for a snug but smooth fit to reduce gas cutting and leading.

• Plunk test in each chamber: Confirm free rotation and proper seating depth before bulk loading.

• Lube/coating care: If your bullets are pre-lubed or coated, avoid harsh solvents prior to seating that could degrade the finish.

Storage & Handling

• Cool, dry storage: Minimize oxidation; keep bullets in original packaging or sealed bins.

• Track by lot: Mark containers with lot/date to correlate with chrono notes and target results.

• Gentle handling: Preserve the sharp SWC shoulder for the cleanest scoring cuts.

Who These Bullets Are For

• Revolver enthusiasts dialing in accurate, clean-cutting .41 loads.

• Bullseye/PPC & league shooters who need repeatable precision and easy-to-score impacts.

• Instructors & clubs stocking reliable, budget-savvy projectiles for high-rep training.

• Handloaders wanting a forgiving, time-proven bullet geometry for .41 Magnum and .41 Special.

FAQ (Quick Answers)

• Will these work in .41 Special? Yes—use published .41 Special data and seat/crimp per the groove.

• Best diameter for my gun? Many .41 revolvers prefer .410–.411"—verify throat and groove dimensions for optimal fit.

• Can I use these on steel? Often yes at appropriate distances/velocities; always follow range and target maker guidelines.

SEO Highlights (Quick Scan)

• .41 caliber cast SWC bullets – 500/ct

• Hard-cast lead with crimp groove for .41 Magnum / .41 Special

• Clean scoring, consistent accuracy, economical bulk pack

• SKU SS41215SWC

Suggested Meta Title

.41 Caliber Cast SWC Bullets – 500/ct Hard-Cast for .41 Magnum & .41 Special | SS41215SWC

Suggested Meta Description

Load precise, clean-cutting .41 revolver rounds with hard-cast SWC bullets. 500/ct bulk pack, crimp groove for secure OAL—ideal for target, leagues, and training. SKU SS41215SWC.

The End