AB Suppressor Raptor Flush Mount — 1/2x28 Thread | Grade-5 Titanium | Low-Profile Interface | SKU F22-FM-1/2-28 | UPC 679065310975
Lock in lightweight performance with the AB Suppressor Raptor Flush Mount (1/2"x28)—a precision-machined, grade-5 titanium interface designed to pair your Raptor series suppressor with AR-15 and carbine platforms that use the ubiquitous 1/2x28 thread pattern. The flush-mount profile keeps overall length and POI shift to a minimum while delivering a concentric, rock-solid attachment point for repeatable accuracy and stress-free removal after high-round-count range days.
Brand: AB Suppressor
Product: Raptor Flush Mount
Thread Pitch: 1/2x28 (common for .223 Rem/5.56 NATO and similar small-bore applications)
Material: Titanium (Ti-6Al-4V / Grade-5)
Finish: High-end corrosion and heat resistance (titanium)
Model/SKU: F22-FM-1/2-28
UPC: 679065310975
Why Choose the AB Suppressor Raptor Flush Mount?
True Flush, True Balance
The low-profile, flush-mount geometry keeps added length and weight down, preserving your rifle’s handling, balance, and natural point-of-aim.
Grade-5 Titanium Strength
Built from Ti-6Al-4V, this mount delivers best-in-class strength-to-weight, exceptional corrosion resistance, and excellent thermal stability under sustained strings of fire.
Concentricity for Accuracy
Precision internal geometry helps maintain bore alignment to support accuracy and reduce the chance of baffle strikes when installed correctly.
Fast On/Off with Repeatability
Designed for the AB Suppressor Raptor interface to encourage consistent lockup, helping your zero stay predictable between removal and re-installation.
Duty-Ready Durability
Titanium construction shrugs off carbon, heat, and fouling, while threads are cut to exact tolerance for long service life.
Ideal Use Cases
Carbine & Patrol Builds: Minimal added length for quick handling around barricades and vehicles.
Precision .223/5.56 Platforms: Concentric, rigid interface to support repeatable POI and reliability during long practice sessions.
Hunting & Field Use: Lightweight titanium keeps the rifle nimble on long hikes and in variable weather.
Training & High-Volume Range Days: Heat-resistant titanium and a flush profile make post-string removal simpler (after cooling).
Compatibility & Fit
Suppressor Family: AB Suppressor Raptor (flush-mount interface).
Barrel Threads: 1/2x28 (verify your barrel’s thread pitch and shoulder).
Calibers: Optimized for small-bore applications commonly using 1/2x28 (e.g., .223 Rem, 5.56 NATO, some .22 centerfire); always confirm caliber and suppressor rating.
Muzzle Shoulders: Requires a square, properly machined shoulder for correct alignment.
Pro Tip: If your rifle runs an extended handguard, confirm clearance and that the mount/suppressor won’t contact the rail under flex.
Installation Notes (Overview)
Confirm Thread Pitch: Ensure your barrel is 1/2x28 and is clean, burr-free, and concentric.
Apply the Proper Compound: Follow AB Suppressor guidance regarding anti-seize or thread treatment as recommended.
Torque to Spec: Tighten to the manufacturer’s torque value using a calibrated wrench.
Index & Verify: Check alignment with a suppressor alignment rod before live fire.
Re-Check After First Session: Heat cycles can settle interfaces—verify tightness once everything cools.
(If you’re unsure, consult a qualified gunsmith. Always follow AB Suppressor’s official instructions.)
Compliance Reminder
NFA/GCA Laws Apply: Suppressors are regulated items. Ensure all federal, state, and local laws are followed for purchase, transfer, and possession.
Safety First: Inspect alignment before use; never fire with suspected misalignment or damaged threads.
Key Features at a Glance
Flush-mount titanium interface for AB Raptor suppressors
1/2x28 thread pitch (AR-15 standard)
Grade-5 titanium for optimal strength-to-weight and heat resistance
Precision concentricity for accuracy and repeatable POI
Corrosion-resistant, field-tough construction
SKU/UPC: F22-FM-1/2-28 — 679065310975
Frequently Asked Questions
Q: Will this work with non-Raptor suppressors?
A: It’s designed specifically for the AB Suppressor Raptor flush-mount interface. Use only as intended by the manufacturer.
Q: Do I need shims or a crush washer?
A: Most flush mounts install direct to the shoulder. Use shims only if the manufacturer specifies; do not use a crush washer unless explicitly recommended.
Q: Can I use this on .22LR or other small calibers?
A: The thread pitch fits many small-bore barrels, but always confirm suppressor rating and manufacturer guidance for your caliber.
Q: What finish is on the mount?
A: It’s titanium—naturally corrosion-resistant and heat-tolerant, ideal for hard field use.
Technical Specs (Summary)
Model/SKU: F22-FM-1/2-28
UPC: 679065310975
Thread Pitch: 1/2x28
Material: Grade-5 Titanium (Ti-6Al-4V)
Interface: AB Suppressor Raptor (flush mount)
Use Case: Carbine, precision, training, and field applications
SEO Highlights (Naturally Woven)
AB Suppressor Raptor Flush Mount 1/2x28, titanium suppressor mount, AR-15 1/2x28 muzzle mount, lightweight low-profile interface, precision concentricity, corrosion-resistant Grade-5 titanium, SKU F22-FM-1/2-28, UPC 679065310975.
Meta for Your Product Page
Meta Title: AB Suppressor Raptor Flush Mount — 1/2x28 Titanium | F22-FM-1/2-28
Meta Description: Titanium flush mount for AB Raptor suppressors. 1/2x28 thread, Grade-5 titanium, lightweight, corrosion-resistant, and precision-machined for repeatable POI. SKU F22-FM-1/2-28 — UPC 679065310975.
From the first cold-bore shot to the last hot string, the AB Suppressor Raptor Flush Mount (1/2x28) delivers lightweight strength, repeatable alignment, and a truly low-profile footprint—so your rifle runs exactly the way you built it.
The End
