AICS Short Action 6.5 PRC Magazine | 8-Round | DSSF (Double-Stack, Single-Feed) | Black | Part: 00100-0079
Feed your magnum short-action build with the magazine engineered for smooth, centerline presentation of the 6.5 PRC. The AICS Short Action 6.5 PRC 8rd DSSF Magazine (Black, 00100-0079) combines rock-solid AICS-pattern compatibility, a rugged steel body, and optimized geometry for modern high-BC bullets seated to SAAMI COAL (approx. 2.955"). With **DSSF—Double-Stack, Single-Feed—**internals, you get the efficiency of a double column and the reliability of a single-feed release, delivering butter-smooth chambering from the first round to the last.
Whether you’re stretching to 1,000+ yards, dialing wind at a club match, or hunting in steep country, this 8-round AICS mag gives your 6.5 PRC rifle the capacity, durability, and feeding consistency serious shooters demand.
Why This AICS 6.5 PRC 8-Round DSSF Magazine Stands Out
Purpose-Built for 6.5 PRC: Feed-lip geometry, follower angle, and spring rate are tuned for magnum short-action cartridges with a rebated rim (0.532").
DSSF Reliability: Double-stack to maximize capacity, single-feed to keep cartridges centered on the bolt for smooth, controlled chambering—even with long-ogive ELD-type bullets.
AICS-Pattern Compatibility: Works with most AICS-pattern short-action chassis and bottom-metal systems designed for magnum SA cartridges (see fit notes below).
Rugged Steel Construction: Heat-treated steel body resists dents and feed-lip deformation; low-glare black finish shrugs off weather and solvents.
8-Round Capacity: Ideal for PRS/NRL stage flow, backcountry hunting insurance, and extended range sessions with fewer reloads.
Serviceable Design: Disassembles easily for cleaning; follower and spring are tuned for uniform stack pressure and reliable last-round pickup.
Key Specifications (At a Glance)
Cartridge: 6.5 PRC (Short Action, magnum bolt face)
Capacity: 8 rounds
Format: DSSF – Double-Stack, Single-Feed
Body Material: Steel with black corrosion-resistant finish
Pattern: AICS-compatible short action (magnum SA pattern)
Color: Black
Part Number: 00100-0079
Performance You Can Feel
Smoother Bolt Stroke: Centerline single-feed release improves bolt feel and reduces nose-dive or bolt-over-base issues—critical with heavy, high-BC bullets.
Consistent POI Confidence: Reliable, repeatable chambering supports shot-to-shot consistency from cold bore through long strings.
Field-Ready Dependability: Spring rate and feed timing are set for uniform release under recoil, awkward positions, and dusty or wet environments.
Ideal Use Cases
Precision Rifle Competition (PRS/NRL): 8 rounds keeps your stage plan on track with fewer mag changes; low-glare finish and compact stack height help on bags and barricades.
Western Big-Game Hunting: Low-profile footprint won’t snag on packs or brush; extra rounds on tap for follow-ups at distance.
Zero & Data Days: Spend time collecting dope—not clearing malfunctions—thanks to centerline feeding and a durable steel tube.
LE/Mil & Professional: AICS-pattern steel construction for duty-grade reliability in magnum short-action platforms.
Fitment & Compatibility Notes
AICS Pattern: Designed for AICS-pattern short-action chassis and bottom metals intended for magnum SA cartridges (e.g., 6.5 PRC).
Action/BM Variations: Latch cuts, insertion angle, and internal clearances can vary by manufacturer. Confirm compatibility with your action and DBM/chassis maker.
COAL & Bullet Selection: Supports typical 6.5 PRC seating depths (SAAMI COAL ≈ 2.955"). Extremely long handloads may exceed internal length—measure before loading.
Not for Non-Magnum SA: This magazine is tuned for magnum short-action case geometry; for cartridges like 6.5 Creedmoor/.308 Win, use their dedicated AICS magazines.
Care & Maintenance
Run Clean & Dry: Wipe interior surfaces and follower; avoid heavy oils that trap dust and slow travel.
Inspect Feed Lips: After drops or rough travel, verify feed-lip integrity for consistent release timing.
Spring Lifecycle: High-round-count users should replace springs periodically to maintain uniform stack pressure.
Mark & Rotate: Label magazines for training vs. match/hunting and rotate to track service life.
Pro Tips for Best Results
Function-Test Your Load: Cycle your chosen bullet weight and COAL from a full mag in prone, kneeling, and barricade positions.
Torque Matters: Correct action and bottom-metal torque minimizes mag rocking and preserves feed angle.
Keep a Spare: Carry a second identical mag to streamline stage planning and provide redundancy in the field.
Frequently Asked Questions
Q: What does DSSF mean and why is it helpful?
A: Double-Stack, Single-Feed increases capacity without height while feeding from the centerline for smoother bolt operation and improved reliability with long-ogive bullets.
Q: Will this work in my 6.5 PRC rifle?
A: If your rifle uses AICS-pattern short-action magnum bottom metal/chassis, it should. Always verify with your chassis/DBM manufacturer.
Q: Is it compatible with 6.5 Creedmoor or .308?
A: This model is optimized for 6.5 PRC (magnum SA). Use mags designed for your specific cartridge’s case taper and COAL for best results.
Q: Can I keep it loaded long-term?
A: Quality springs tolerate extended compression, but best practice is to inspect and rotate magazines—especially for duty or hunt use.
Q: What’s the follower made of?
A: Follower material may vary by production; the system is tuned to provide smooth travel and reliable last-round pickup regardless.
SEO Highlights (Quick Scan)
AICS short action 6.5 PRC 8-round DSSF magazine, steel, black finish
Centerline single-feed for smooth chambering with high-BC bullets
AICS-pattern compatibility for magnum SA actions/chassis; part 00100-0079
Ideal for PRS/NRL competition, western hunting, training, and professional use
Compliance Reminder
Magazine capacity laws vary by jurisdiction. Always verify and follow federal, state, and local regulations governing purchase, possession, transport, and use.
Count on centerline reliability, rugged steel construction, and stage-friendly capacity. The AICS Short Action 6.5 PRC 8rd DSSF Magazine (00100-0079) is the confidence-inspiring choice for precision shooters who demand performance—from the zero line to the far ridge.
"The End"
