Ameristep Step-Up Tree Step – 4" Wide, Black, 8-Pack
Heavy-Duty Steel • Aggressive Tread • Self-Tapping Pilot Point • Compact & Quiet for Mobile Hunters
Model: AMSAMEAC0100 • UPC: 769524914001
Build a safer, quieter path to your treestand with the Ameristep Step-Up Tree Step (4" Wide) – 8 Pack. Engineered for run-and-gun whitetail hunters, saddle hunters, and lease managers alike, these heavy-duty steel tree steps bite hard and hold fast, creating a sturdy, reliable climbing route that won’t weigh you down. A 4-inch wide step surface with aggressive traction improves boot grip in wet, frosty, or muddy conditions, while the black, low-glare finish keeps your setup stealthy in the timber.
Whether you’re prepping new sets in early season or slipping into a fresh funnel in November, Ameristep Step-Up Tree Steps offer compact packability, quiet installation, and solid footing—hunt after hunt.
Why Hunters Choose the Ameristep Step-Up Tree Steps
Heavy-Duty Steel Construction
Built to support confident climbing with stout, one-piece steel that resists flex and fatigue over repeated seasons.
4" Wide, Traction-Rich Platform
A generous 4-inch step and aggressive tread pattern enhance boot contact for safer climbing in real-world weather.
Self-Tapping Pilot Point
The threaded tip bites into the tree quickly for easier starts and less noise—ideal when setting up before first light.
Low-Glare Black Finish
Matte black coating reduces shine and helps the steps blend into bark and canopy shadow for a lower visual profile.
Packable 8-Pack Value
Eight steps provide flexible spacing for typical treestand heights or to supplement existing stick ladders and platforms.
Tree Health Tip: Use on living, healthy trees of sufficient diameter. Avoid brittle, diseased, or dead trees. Always follow local regulations and landowner rules.
Key Specifications
Brand / Series: Ameristep – Step-Up Tree Step
Model / UPC: AMSAMEAC0100 / 769524914001
Quantity: 8 steps per pack
Step Width: 4 inches
Material: Steel with black, low-glare finish
Color: Black
Use: Treestand access, saddle hunting routes, camera placement climbs, stand maintenance
Performance You’ll Notice
Secure Footing in the Real World
The wide, treaded step supports stable foot placement even over awkward knots or slick, rain-darkened bark.
Faster, Quieter Setups
The self-starting threaded tip reduces squeaks and effort, getting you up the tree with less noise and time at the base.
Flexible Spacing for Any Height
With eight steps, tailor your spacing to your inseam, pack weight, and tree lean for an efficient, comfortable climb.
Ideal Use Cases
Run-and-Gun Whitetails: Packable steps that stash in a daypack and install in minutes.
Saddle Hunting: Add steps above your sticks for top-out options and equipment staging.
Lease & Farm Prep: Build semi-permanent routes to stands you plan to hunt repeatedly.
Trail Cameras & Feeders: Safely access elevated camera positions to reduce spook and theft risk.
Installation Guide (General)
Choose the Right Tree: Straight, healthy, and of sufficient diameter.
Start Low & Spiral Up: Begin 18–24" above ground, then spiral steps around the trunk to maintain a comfortable climb angle.
Thread by Hand, Seat Firmly: Use steady pressure to hand-thread the pilot point until snug.
Check Each Step: Before climbing, wiggle-test and re-tighten.
Climb with 3-Point Contact: Move one limb at a time while maintaining three points of contact.
Safety: Always use a full-body harness and lifeline/tether. Inspect steps before each use. Never exceed the manufacturer’s weight rating (consult packaging).
Pro Tips for Quiet, Safe Use
Pre-Mark Spacing: Use your forearm length or a measured tether to keep spacing consistent in low light.
Avoid Over-Tightening: Seat steps firmly without excessive torque to protect bark and threads.
Blend & Disappear: Dust steps with a bit of non-reflective camo tape if gloss appears after heavy use.
Seasonal Checkups: Mid-season, re-check tightness and tread before big weather swings or rut marathons.
Frequently Asked Questions
Q: How many steps do I need for a 15–20 ft stand?
A: Most hunters use 6–10 steps depending on inseam and spacing. This 8-pack typically covers 15–18 ft for average spacing.
Q: Will these work on all tree species?
A: They’re effective on most live, healthy hardwoods and softwoods. Avoid dead, brittle, or punky trees.
Q: Can I leave them up year-round?
A: Many hunters do, but inspect regularly. Environmental exposure can loosen steps over time; re-tighten as needed.
Q: Are they compatible with saddle hunting?
A: Yes—use as top-out steps, platform staging, or to augment your climbing stick system.
Q: Do they damage the tree?
A: Any penetrating step impacts bark. Choose healthy trees, install correctly, and consult property rules and local regulations.
SEO Highlights (Quick Scan)
Ameristep Step-Up Tree Step 4" — black steel, 8-pack, self-starting threaded tip
Reliable, quiet installation and aggressive traction for safer climbs
Ideal for treestand access, saddle hunting, and elevated camera setups
Model AMSAMEAC0100, UPC 769524914001 — packable, low-glare finish, durable hardware
The Bottom Line
The Ameristep Step-Up Tree Step (4" Wide) – 8 Pack delivers secure footing, quiet installation, and durable steel construction in a slim, pack-friendly format. From run-and-gun sets to season-long access routes, these steps help you climb safer, faster, and smarter—so you can focus on the wind, the sign, and the shot.
The End
