Anderson Knight Stalker Flash Hider – 1/2x28 Threads, 5.56 NATO / .223 Rem
(Model G2-K031-A002-0P | UPC 686162540457)
Tame muzzle flash and sharpen your rifle’s field performance with the Anderson Knight Stalker Flash Hider. Precision-machined for 1/2x28 muzzle threads and optimized for 5.56 NATO / .223 Rem barrels, this compact device disrupts unburnt powder at the muzzle to reduce visible flash, preserve your night vision, and keep your sight picture cleaner for faster follow-up shots. It’s a smart, value-packed upgrade for AR-15 builds, patrol carbines, and lightweight range rifles alike.
Whether you’re finishing a new upper or refreshing a well-loved carbine, the G2-K031-A002-0P brings dependable performance in a rugged, duty-ready package designed to withstand high round counts and tough weather.
Why Choose the Knight Stalker Flash Hider?
Effective Flash Suppression
Multi-port geometry helps break up expanding gases to minimize muzzle flash, aiding target transitions in low light.
Standard AR Compatibility
Cut for 1/2x28 threads, the industry standard for 5.56/.223 AR-pattern barrels, ensuring broad fitment across uppers and builders.
Balanced Size & Weight
Compact profile maintains rifle balance and avoids unnecessary front-end heft—ideal for 16" carbines and lightweight builds.
Durable, Field-Ready Construction
Built from quality steel with a corrosion-resistant black finish for long service life in rain, sweat, dust, and carbon.
Clean, No-Nonsense Look
Classic lines complement any AR aesthetic—from minimalist M-LOK builds to retro-inspired carbines.
Key Specifications
Product: Anderson Knight Stalker Flash Hider
Model: G2-K031-A002-0P
UPC: 686162540457
Caliber Range: 5.56 NATO / .223 Rem (and other .22-cal variants using 1/2x28; verify bore clearance)
Thread Pitch: 1/2x28 TPI (right-hand)
Material: Steel
Finish: Black, corrosion-resistant
Application: AR-15 / modern sporting rifles with 1/2x28 threaded muzzles
Note: Package contents can vary by vendor or production run. Confirm whether a crush washer or shims are included before installation.
Performance Benefits You’ll Notice
Preserved Low-Light Vision
Reduced visible flash helps protect night-adapted vision—useful for indoor ranges, evening classes, and hunting at dawn/dusk.
Faster Follow-Ups
A cleaner sight picture during the shot means less distraction from bright muzzle signature and more focus on the next target.
Reliable, Repeatable Fit
Properly torqued and indexed, the device seats evenly to help maintain alignment and consistent performance over long shooting sessions.
Ideal Use Cases
General-Purpose AR Builds: A dependable default for carbines and rifles that need practical flash reduction.
Training & Home Readiness: Cut flash indoors and in low light for better situational awareness.
Hunting & Ranch Rifles: Keep muzzle signature modest when shooting at dawn or dusk.
Budget-Smart Upgrades: Improve function and finish without overspending.
Installation Tips (High-Level)
Verify Clear & Thread Pitch: Ensure the firearm is unloaded. Confirm 1/2x28 muzzle threads and bore diameter compatibility.
Use a Proper Washer: Index with a crush washer or shim kit as recommended; replace worn washers—don’t reuse.
Torque & Timing: Hand-snug, then torque incrementally until correctly timed (ports oriented as intended).
Protect the Finish: Use a proper armorer’s tool on the flats to avoid marring.
Function Check: Inspect alignment and perform a bore check before live fire.
Unsure about timing or torque? A qualified gunsmith/armorer can install and verify in minutes.
Care & Maintenance
Carbon Control: After range days, wipe exterior surfaces and lightly oil to resist rust.
Thread Health: Periodically check timing and snugness; carbon and heat cycles can loosen poorly installed devices.
Environmental Ready: If exposed to rain or salt air, dry and re-oil to preserve finish.
Frequently Asked Questions
Q: Will this fit my AR-15?
A: If your barrel is 1/2x28 threaded and chambered in 5.56/.223, yes—this flash hider is designed for that standard.
Q: Is a crush washer included?
A: Contents vary—some vendors bundle washers; others don’t. Check the listing or add a crush washer/shim kit to your cart.
Q: Can I use it with .22 LR trainers?
A: Many .22 LR uppers also use 1/2x28 threads. Verify bore clearance and manufacturer guidance before installing.
Q: Does it reduce recoil or muzzle rise?
A: A flash hider’s priority is flash suppression. For recoil or rise control, consider a brake or hybrid device—mind blast and flash tradeoffs.
Q: Any legal considerations?
A: Muzzle device rules vary by state/locale. Verify local laws before purchase and installation.
SEO Highlights (Quick Scan)
Anderson Knight Stalker Flash Hider
1/2x28 muzzle device for 5.56 NATO / .223 Rem AR-15
Steel construction, black corrosion-resistant finish
Reduces visible muzzle flash; compact, low-profile design
Model G2-K031-A002-0P, UPC 686162540457
Ideal for general-purpose AR builds, training, and low-light shooting
The Bottom Line
The Anderson Knight Stalker Flash Hider is the straightforward, reliable way to cut muzzle flash on a 5.56/.223 AR while keeping weight and cost in check. With 1/2x28 threads, rugged steel construction, and a clean black finish, it’s a plug-and-play upgrade that looks right, installs easily, and performs when the sun goes down.
The End
