Ballistic Advantage Premium Black Series — Hanson Profile Barrel, .223 Wylde, 14.5" Threaded, 1/2x28, 1:8 Twist, Mid-Length Gas, QPQ Matte Finish (Black) with Included Low-Profile Gas Block | Model BABL223008PQ | UPC 819747021502

Upgrade your AR-15 with a barrel trusted by accuracy-minded builders. The Ballistic Advantage Premium Black Series Hanson Profile Barrel in .223 Wylde delivers match-grade precision, soft recoil impulse, and rugged durability in a compact 14.5" package. Featuring the signature Hanson profile for optimized balance, a mid-length gas system for smoother cycling, a corrosion-resistant QPQ (nitride) matte black finish, and an included low-profile gas block, this barrel is built to run hard and shoot tight.

Why This Barrel Stands Out

• .223 Wylde Chamber — Safely runs both .223 Rem and 5.56 NATO with improved accuracy potential thanks to tighter freebore geometry.

• Hanson Profile — A carefully tuned contour that reduces barrel whip and improves harmonics without excess weight—stability you can feel.

• 14.5" Length — Compact handling with excellent velocity retention; ideal for duty-grade carbines, truck guns, and lightweight builds.

• Mid-Length Gas System — Softer recoil impulse and reduced parts wear versus carbine gas; runs clean with today’s ammo.

• 1:8" Twist Rate — Versatile stability across common bullet weights (55–77gr) for training, defense, or match loads.

• 1/2x28 Threads — Industry-standard muzzle threads for brakes, comps, flash hiders, and suppressor mounts (where legal).

• Premium QPQ Nitride — Deep salt bath nitrocarburizing for excellent corrosion resistance, surface hardness, and long service life.

• Included Low-Profile Gas Block — Matched block saves time and ensures proper alignment under free-float handguards.

Compliance Note: A 14.5" barrel typically requires a permanently pinned & welded muzzle device to achieve a legal 16" minimum overall barrel length (where applicable). Always follow local, state, and federal regulations.

Real-World Performance You Can Trust

Ballistic Advantage’s machining, chambering, and finish quality mean repeatable groups and reliable function through long training days. The Hanson profile keeps the front lively for faster transitions, while the mid-length gas delivers a smoother recoil cycle that helps you stay on glass and call your shots.

Ideal Uses

• General-purpose carbine builds where accuracy and handling both matter

• Duty/defense rifles needing predictable POI and dependable cycling

• Competition/3-Gun setups that reward quick transitions and tight splits

• Suppressor hosts (where legal) ~ mid-length gas + tuned muzzle device for a cleaner impulse

Installation & Setup Tips (General Guidance)

1. Use a proper upper receiver fixture and torque wrench; follow torque specs for your barrel nut/handguard system.

2. Degrease, then lightly oil the barrel extension; ensure clean mating surfaces.

3. Align and secure the included low-profile gas block with quality roll pins/set screws (dimple if needed).

4. Headspace check with “go/no-go” gauges recommended for best practice.

5. After zeroing, paint-mark fasteners to spot movement after heat cycles.

Materials & Finish

• Steel: Premium 4150 CMV or BA’s specified steel (Premium Black Series)

• Treatment: QPQ nitride (Melonite) inside & out for wear/erosion resistance

• Exterior: Matte black low-glare finish

Specifications (At a Glance)

• Brand/Series: Ballistic Advantage — Premium Black Series

• Model / SKU: BABL223008PQ

• UPC: 819747021502

• Caliber/Chamber: .223 Wylde (shoots .223 Rem & 5.56 NATO)

• Length: 14.5 inches

• Profile: Hanson

• Gas System: Mid-length

• Gas Block Diameter: 0.750" (low-profile gas block included)

• Twist Rate: 1:8"

• Muzzle Threads: 1/2x28

• Finish: QPQ nitride, matte black

• Platform: AR-15

Pairing Recommendations

• Muzzle Device: Choose a pin/weld-friendly brake or flash hider to meet legal length (e.g., 1.7"+ devices) as required.

• Handguard: Free-float M-LOK® or Picatinny with internal clearance for a 0.750" gas block.

• Buffer System: H/H2 buffer often pairs well with mid-length gas; tune as needed for ammo/suppressor.

• Optics: LPVO (1–6×/1–8×) or red dot + magnifier for a true do-all carbine.

Care & Maintenance

• Break in with quality ammo; nitride requires no special regimen but benefits from early copper/carbon checks.

• Keep the gas block/tube interface and muzzle device properly torqued; re-check after first 100–200 rounds.

• Clean bore with non-abrasive solvents; nitride resists fouling and cleans easily.

SEO-Friendly Highlights (Quick Scan)

• Ballistic Advantage Premium Black Series .223 Wylde 14.5" Hanson barrel

• Mid-length gas, 1:8 twist, 1/2x28 threads

• QPQ matte black finish for durability and corrosion resistance

• Includes low-profile gas block, AR-15 fitment

• Model BABL223008PQ | UPC 819747021502

The Bottom Line

If you’re building a compact AR-15 that handles fast and shoots tight, the Ballistic Advantage Premium Black Series 14.5" Hanson .223 Wylde is the barrel to beat. With mid-length gas, 1:8 twist, QPQ nitride, and a matched low-profile gas block, it delivers the balance, durability, and accuracy today’s shooters demand—on the clock, in the field, and at the range.

The End