Battle Arms Development Inc. AR-15 Billet Enhanced Trigger Guard — Black | BAD-TG-B-KIT | UPC 810033782503

Glove-Friendly Control, Clean Lines, and No More “Gap Bite”

Upgrade your lower with the Battle Arms Development (BAD) AR-15 Billet Enhanced Trigger Guard—a premium, drop-in replacement that delivers more room for gloved hands, eliminates the painful “gap” at the rear of the guard, and adds a refined, billet look to any modern build. Machined from billet aluminum for strength without unnecessary weight and finished in a rugged black coating, the BAD-TG-B-KIT blends seamlessly with Mil-Spec receivers while improving comfort, control, and aesthetics.

Whether you’re building a duty carbine, a competition rifle, or a slick defensive setup, this enhanced trigger guard gives you the extra clearance and slick ergonomics that standard GI guards can’t match—especially in cold weather or high-tempo drills.

Model: BAD-TG-B-KIT • UPC: 810033782503 • Color: Black • Platform: AR-15 (Mil-Spec)

Why Choose the BAD Billet Enhanced Trigger Guard?

More Room Where It Matters

The slightly enlarged, curved profile provides added space around the trigger for gloves or fast access—without the bulky look of oversize guards.

No More “Gap” at the Rear

This guard fills the front strap gap at the rear of the trigger guard that can rub or pinch your finger during long range sessions and manipulations.

Billet Strength, Lightweight Feel

CNC-machined billet aluminum provides excellent rigidity with minimal weight, maintaining receiver alignment and clean lines.

Duty-Ready Black Finish

A durable black finish resists abrasion and common gun cleaners while matching anodized receivers for a cohesive look.

Clean, Modern Aesthetics

The sleek, beveled design complements premium lowers and handguards—perfect for today’s minimalist or duty-grade builds.

Key Features at a Glance

• Glove-Friendly Opening: Enlarged interior for easier access in cold weather or rapid drills

• Ergonomic Curve: Reduces pressure points; improves finger clearance and comfort

• Billet Aluminum Construction: Strong, lightweight, and precisely machined

• Durable Black Finish: Low-glare, abrasion-resistant coating to match modern receivers

• “Gapless” Fit: Fills the rear trigger-guard gap on Mil-Spec lowers

• Hardware Included: KIT configuration designed to include installation hardware*

• Compatibility: AR-15 Mil-Spec lowers (most)

• Model / UPC: BAD-TG-B-KIT / 810033782503

*Typical kits include roll pin(s) and/or set screw(s). Package contents can vary—always verify your box label.

Ideal Use Cases

• Duty/Defensive Carbines: Reliable access with gloves and under stress

• Competition Rifles: Faster, more comfortable index during high-round strings

• Training & Classes: Eliminates hot spots from the rear gap over long sessions

• Premium Builds: Billet look that complements upgraded receivers and controls

Installation Overview (Quick Guide)

1. Verify Clear: Remove magazine; visually/physically check the chamber.

2. Support the Ears: Place the lower on a bench block to protect the trigger-guard “ears.”

3. Remove Old Guard: Drift out the front roll pin and loosen/remove rear detent/screw (if present).

4. Fit the BAD Guard: Align the rear of the guard first, then the front.

5. Secure Hardware: Install roll pin/set screw per the included instructions; consider a drop of thread locker if recommended by the manufacturer.

6. Final Check: Confirm full trigger movement, safe operation, and no interference with the pistol grip.

Important: Never hammer on unsupported receiver ears—support them fully to avoid damage. If unsure, consult a qualified armorer.

Technical Specifications

• Product: AR-15 Billet Enhanced Trigger Guard

• Manufacturer: Battle Arms Development Inc.

• Construction: Billet aluminum (CNC-machined)

• Finish/Color: Black (low-glare, wear-resistant)

• Compatibility: Mil-Spec AR-15 lowers (not intended for AR-10/LR-308 or proprietary receivers)

• Mounting: Roll pin / screw (KIT hardware included; verify package)

• Model: BAD-TG-B-KIT

• UPC: 810033782503

Dimensions and hardware type may vary slightly by production run; always follow the included instructions.

Frequently Asked Questions

Q: Will this fit my AR-10/LR-308 lower?
A: This model is intended for AR-15 Mil-Spec lowers. Large-frame receivers may use different geometry—check with your receiver manufacturer.

Q: Do I need special tools?
A: A roll-pin punch, small hammer, bench block, and driver (if a set screw is included) are typically sufficient. Protect the receiver ears during installation.

Q: Does it really remove the “gap bite”?
A: Yes—the enhanced guard fills the rear gap, eliminating the pressure point common to GI guards.

Q: Will the black finish match my receiver?
A: It’s designed to complement black anodized receivers. Minor tone differences can occur among finishes and manufacturers.

SEO-Rich Highlights & Buyer Keywords

• Battle Arms Development AR-15 Billet Enhanced Trigger Guard

• BAD-TG-B-KIT black trigger guard with hardware (KIT)

• Glove-friendly enlarged opening; gapless comfort design

• Billet aluminum, CNC-machined, low-glare black finish

• AR-15 Mil-Spec compatibility, easy installation

• UPC 810033782503

Meta Title (SEO)

Battle Arms Development AR-15 Billet Enhanced Trigger Guard — Black | BAD-TG-B-KIT | UPC 810033782503

Meta Description (SEO)

Upgrade your AR-15 with the Battle Arms Development Billet Enhanced Trigger Guard. Glove-friendly clearance, gapless comfort, billet aluminum construction, and black finish. Model BAD-TG-B-KIT, UPC 810033782503.

Structured Data (Product Schema JSON-LD)

json
Copy code
{
  "@context": "https://schema.org/",
  "@type": "Product",
  "name": "Battle Arms Development AR-15 Billet Enhanced Trigger Guard (Black)",
  "sku": "BAD-TG-B-KIT",
  "gtin12": "810033782503",
  "brand": {
    "@type": "Brand",
    "name": "Battle Arms Development Inc."
  },
  "category": "Sporting Goods > Outdoor Recreation > Shooting > Gun Parts",
  "description": "Billet aluminum enhanced trigger guard for AR-15 Mil-Spec lowers. Enlarged, glove-friendly opening with gapless rear fit and durable black finish. KIT includes installation hardware (verify contents).",
  "additionalProperty": [
    { "@type": "PropertyValue", "name": "Platform", "value": "AR-15 (Mil-Spec lowers)" },
    { "@type": "PropertyValue", "name": "Material", "value": "Billet aluminum" },
    { "@type": "PropertyValue", "name": "Color", "value": "Black" },
    { "@type": "PropertyValue", "name": "Feature", "value": "Glove-friendly, gapless ergonomic design" }
  ]
}

Responsible Use Reminder

Always unload and verify your firearm before installation. Support receiver ears, follow manufacturer torque and thread-locker guidance, and complete a full function check prior to live fire.

The End