Beretta USA MicroCore® Sporting & Skeet Recoil Pad — 0.51" Profile, Black Rubber (E73021 • UPC 082442156644)
Mount faster, stay on target longer, and finish stages with a smile. The Beretta USA MicroCore® Sporting & Skeet Recoil Pad brings competition-grade comfort and control to your shotgun with a slim 0.51" profile and soft black microcellular rubber that cushions recoil without feeling spongy. Purpose-built for sporting clays and skeet, this pad promotes smooth gun mount, consistent shoulder purchase, and better swing continuity—so your head stays in the gun and your eyes stay on the bird.
Why Sporting & Skeet Shooters Choose MicroCore®
Soft, progressive recoil absorption: MicroCore’s proprietary micro-cell structure spreads impulse over time, helping reduce felt recoil while preserving a lively, connected gun feel.
Fast, snag-free mount: A lightly textured, non-tacky face slides into position cleanly, preventing hang-ups on vests or jerseys during quick transitions.
Slim 0.51" profile: Keeps length of pull (LOP) changes minimal, ideal when you want extra comfort without disrupting a proven gun fit.
Shoulder-locking shape: Contoured edges increase surface contact to anchor the butt consistently, enhancing mount repeatability and cheek weld.
Competition-ready durability: Resilient black rubber resists compression set and temperature swings, delivering season-after-season performance.
Key Features at a Glance
Model: E73021
UPC: 082442156644
Series: MicroCore® Sporting & Skeet
Material: Black microcellular rubber (Beretta MicroCore®)
Profile/Size: 0.51" (slim profile)
Use: Sporting clays • Skeet • Target practice
Install: Designed for Beretta stocks that accept MicroCore® pads; typically a straightforward swap (see fit notes below)
Performance You’ll Notice
Less face slap, steadier beads: Progressive damping smooths the shot cycle so your sight picture and mount remain stable for quicker second birds.
Improved swing and follow-through: Balanced softness minimizes rebound and keeps the butt firmly planted during hard crossers.
Repeatable mount, every station: The pad’s contour helps align the gun in the pocket consistently, reinforcing muscle memory across long practice days.
Pro Tip: Use a slim pad like this 0.51" when you already like your LOP and just want softer feel and cleaner mounting. If you need to lengthen LOP, opt for a thicker MicroCore® pad instead.
Fit & Compatibility Notes
Intended for Beretta shotguns with MicroCore®-ready buttstocks (Sporting/Skeet configurations).
Fit can vary between field vs. target stocks and by model generation; verify your shotgun’s pad pattern and screw spacing before purchase.
Generally installs with existing hardware; avoid over-tightening to protect the rubber structure.
Quick Installation Overview
Unload and double-check the shotgun is safe.
Remove the existing pad (typically two screws through the pad face).
Align the MicroCore® pad with stock holes; start screws by hand.
Tighten gently and evenly until snug—do not compress the rubber.
Mount the gun to confirm LOP and shoulder alignment.
(If you’re unsure about fitment on your model, consult your gunsmith or Beretta’s fit guide.)
Specifications
Care & Maintenance
Wipe clean with a damp cloth; avoid harsh solvents and petroleum products.
Store away from prolonged heat and direct sunlight to preserve elasticity.
Periodically check screw tension to maintain pad alignment.
Ideal Use Cases
Sporting clays courses: Faster second-shot recovery and comfortable 100-bird rounds.
Skeet training: Repeatable gun mount and controlled recoil through long practice sets.
Recoil-sensitive shooters: Keep your fit while adding just the right amount of cushion.
SEO Metadata (Merchant-Ready)
SEO Title: Beretta MicroCore Sporting & Skeet Recoil Pad — 0.51" Black Rubber (E73021)
Meta Description (≤160 chars): Beretta MicroCore Sporting & Skeet recoil pad, 0.51" slim profile, black microcellular rubber for softer recoil and faster mounts. Model E73021.
Target Keywords: Beretta MicroCore recoil pad, Sporting & Skeet recoil pad 0.51, E73021, Beretta shotgun pad black, MicroCore skeet pad
Alt Text (Images): “Beretta MicroCore 0.51-inch black Sporting & Skeet recoil pad (E73021).”
FAQ
Q: Will this pad change my length of pull?
A: Only minimally—its 0.51" profile is designed to fine-tune comfort while preserving your established LOP.
Q: Which Beretta models does it fit?
A: It is intended for MicroCore®-compatible Beretta sporting/skeet stocks. Because screw patterns and butt shapes vary, check your model’s compatibility before ordering.
Q: Can I install it myself?
A: Most shooters can complete a simple DIY install with a screwdriver. If the pad doesn’t align or you’re unsure, a gunsmith can fit it quickly.
Q: Is the surface sticky?
A: The face is smooth and lightly textured—it won’t snag on clothing, aiding fast, consistent mounts.
Q: How long will it last?
A: MicroCore® rubber is engineered for long service life. Avoid chemicals/heat and periodically check screws to maximize longevity.
Reduce fatigue, protect your shoulder, and keep your mount clean—the Beretta USA MicroCore® Sporting & Skeet Recoil Pad (E73021) in 0.51" black rubber makes clay days more comfortable and more consistent.
The End
