Bergara 20 MOA Picatinny Rail — Drilled for Remington® Long Action, Includes 6-48 & 8-40 Screws | BA0010 (UPC: 043125000203)
Push your dope farther with the Bergara 20 MOA Pic Rail for Remington® long-action footprints. Purpose-built for precision shooters, this canted one-piece base adds 20 minutes of angle (MOA) to your optic, preserving internal elevation so you can dial longer distances without bottoming out your scope. Pre-drilled for the Remington Long Action pattern and shipped with both 6-48 and 8-40 screw sets, it’s a smart, future-proof mount for hunters, competitors, and rifle tinkerers who demand solid return-to-zero and rock-steady scope alignment.
Why This Bergara 20 MOA Base Stands Out
Long-range advantage (20 MOA): The built-in cant shifts your scope’s usable elevation upward, letting you hold a center reticle and still dial for extended range shots.
Remington Long Action footprint: Fits the classic Remington® 700 Long Action pattern and other receivers that share the same footprint (many custom and factory clones).
Dual hardware included: Comes with 6-48 and 8-40 screws, giving you the right fasteners for legacy receivers or modern enlarged-thread conversions—no last-minute parts hunt.
Rigid, one-piece design: A continuous rail improves alignment and mounting surface area versus two-piece bases, helping your scope track true.
1913 Picatinny compatibility: Accepts most quality rings and mounts (Picatinny 1913/Weaver-style), so you can run your favorite lightweight or heavy-duty setup.
Precision machining & finish: Clean edges and a protective finish resist field wear and help prevent galvanic corrosion between dissimilar metals.
Pro tip: A 20 MOA base is ideal for scopes with limited internal elevation or when you’re stretching past 600–1,000+ yards, depending on cartridge and scope travel.
Key Features at a Glance
Type: One-piece Picatinny (1913) scope base
Cant: 20 MOA for extended elevation range
Footprint: Remington® Long Action (700 LA pattern and compatible clones)
Hardware: Both screw sets included — 6-48 and 8-40
Finish/Color: Low-glare black
Model: BA0010
UPC: 043125000203
Compatibility & Fit
Designed for: Remington® 700 Long Action footprint receivers.
Also works with: Many custom/clone long-action receivers built to the same pattern (verify hole spacing and thread size).
Bergara owners: Many Bergara centerfire rifles are built on the Rem 700 footprint—check your specific model and thread size before installation.
Check before you torque: Confirm your receiver’s thread size (6-48 vs. 8-40) and hole spacing. Use the matching screws supplied with the base.
Installation & Mounting Tips
Degrease & prep: Clean receiver holes and base screws with a quality degreaser; lightly oil the underside of the base if your environment is humid.
Dry fit & align: Set the rail on the receiver and confirm proper hole alignment and ejection port clearance.
Threadlocker: Apply a small amount of blue (medium) threadlocker to the screws—avoid the action raceways.
Torque values: Typical base screw torque is 15–20 in-lb (always follow your receiver manufacturer’s spec).
Level & lap (optional): Level the action/rail, then your scope and rings. Lapping is optional with quality rings but can improve surface contact.
Function check: Cycle the bolt and ensure full ejection and magazine loading without interference.
Performance Benefits You’ll Notice
More usable elevation: Keep your scope near its optical center while still dialing for long shots—better tracking, less tunneling.
Repeatable zero: Rigid one-piece construction provides consistent ring spacing and alignment for dependable return-to-zero.
Flexible ring placement: Full-length Picatinny slots simplify eye-relief setup for short- or long-tube optics and night-vision/thermal clip-ons.
Future-proof hardware: Whether your receiver is 6-48 or 8-40, you’re covered—ideal for builders and gunsmiths.
Ideal Use Cases
Hunting in open country: Optimize your scope travel for mountain, prairie, and Western shots at extended ranges.
PRS/NRL & club matches: Reliable, repeatable mounting that holds up to barricade work and round-count.
Zero and dope building: Keep optical center closer to mid-travel for better tracking as you chronograph and true ballistics.
What’s in the Box
Frequently Asked Questions
Q: Will this fit a Remington 700 Short Action?
A: No—this model is for Long Action receivers. Use a rail specifically cut for the Short Action footprint if needed.
Q: Do I need bedding under the base?
A: Not required for most installs. Some precision builders lightly bed rails to maximize contact on custom actions.
Q: Can I run Weaver rings?
A: Yes—most Weaver-style rings clamp to Picatinny rails, but true Picatinny rings give the most secure interface.
Q: How much extra range does 20 MOA add?
A: It depends on your scope’s internal travel and cartridge ballistics. As a rule of thumb, 20 MOA (~5.8 mils) helps preserve valuable “up” so you can dial farther.
Specifications
Brand: Bergara Rifles
Product: 20 MOA Picatinny Rail (Remington Long Action)
Cant: 20 MOA
Interface: Picatinny/1913
Hardware: Includes 6-48 and 8-40 screws
Finish: Black, low-glare
Model #: BA0010
UPC: 043125000203
SEO Keyword Ideas
Bergara 20 MOA Pic rail BA0010, Remington 700 long action scope base, 20 MOA Picatinny rail 6-48 8-40 screws, Bergara Rem 700 LA optic mount, long range scope base Remington 700, BA0010 043125000203, one-piece 20 MOA rail black
Lock in your optic and unlock more elevation with the Bergara 20 MOA Pic Rail for Remington Long Action—a precision one-piece base that ships with both 6-48 and 8-40 screws so you can mount with confidence today and grow your rifle tomorrow.
The End
