Blackhawk Stache Non-Tuckable Belt Clip – 1.75" Screw-Mount, Black Polymer

Model: 416A08BK • UPC: 604544683400 • Color: Black • Material: High-strength polymer • Mounting: Screw-mount (non-tuckable) • Belt Size: Fits 1.75" belts

Upgrade your holster setup with the Blackhawk Stache Non-Tuckable Belt Clip (1.75"), a tough, low-profile clip engineered for confident retention and quick on/off convenience. Designed for the popular Blackhawk Stache holster ecosystem and compatible screw-mount holsters, this black polymer clip delivers rock-solid security on 1.75" duty and range belts without adding bulk. Whether you’re configuring EDC, plainclothes duty, or training gear, this non-tuckable clip keeps the holster anchored and aligned for consistent presentations.

Why This Belt Clip Belongs on Your Holster

• Duty-ready hold: Rigid polymer body and secure screw-mount interface resist flex and shifting during draws, reholstering, or vigorous movement.

• Non-tuckable by design: Prioritizes maximum retention and stability over tucked-shirt concealment—ideal for range work, training, and overt/plainclothes carry.

• 1.75" belt compatibility: Sized for sturdier gun belts, keeping the holster from migrating or canting during the day.

• Low-profile & lightweight: Minimal footprint reduces printing and hot spots while maintaining a clean, professional look.

• Built for Stache, fits more: Drop-in fit for Blackhawk Stache holsters; screw pattern works with many two-hole holsters and accessories (verify spacing).

Key Features at a Glance

• Clip Type: Non-tuckable belt clip

• Belt Fit: 1.75" (44.5 mm)

• Mounting: Screw-mount, multi-hole pattern (hardware not always included—check package)

• Material: Impact-resistant polymer (Black)

• Use Case: EDC, plainclothes/detective carry, range training, competition practice

• Model / UPC: 416A08BK / 604544683400

Fit Note: Confirm your holster’s hole spacing and hardware length. If using spacers, ensure adequate clearance for ride height and cant adjustments. Always tighten with threadlocker (blue) to prevent loosening.

Performance You’ll Notice

• Consistent draw stroke: Stable clip geometry keeps the holster in the same place—shot after shot, rep after rep.

• Secure reholstering: Reduced flex helps maintain mouth integrity (holster dependent) and repeatable alignment with your belt line.

• All-day comfort: Smooth edges and low-profile geometry resist pinching and clothing snags.

Ideal Setups

• Stache IWB configurations needing a stronger, 1.75" belt interface

• Range/training rigs where rock-solid retention beats tuckable concealment

• Duty/plainclothes belts with thicker webbing or reinforced cores

• Appendix or strong-side carry (holster dependent)

Installation Tips

1. Unload & clear your firearm; remove holster from belt.

2. Align the clip with the holster’s screw holes; add spacers if ride height/cant tuning is desired.

3. Apply blue threadlocker to screws; tighten evenly—do not over-torque.

4. Test draw & reholster with an unloaded firearm; adjust ride height and cant for comfort and concealment.

5. Re-check screws after the first range session and periodically thereafter.

Care & Maintenance

• Wipe down with a damp cloth; avoid harsh solvents.

• Inspect mounting screws and clip body for wear, cracks, or loosened hardware.

• Replace hardware at first sign of deformation or thread wear.

What’s in the Box

• Blackhawk Stache Non-Tuckable Belt Clip, 1.75" (Black Polymer)
  (Mounting hardware may vary by retailer—confirm contents before purchase.)

SEO Highlights (What Shoppers Search)

• Blackhawk Stache non-tuckable 1.75" belt clip

• 416A08BK UPC 604544683400 holster clip

• Screw-mount polymer belt clip for gun belts

• Blackhawk Stache holster accessories

• 1.75 inch holster clip durable polymer

Meta Title (SEO)

Blackhawk Stache Non-Tuckable Belt Clip – 1.75" Screw-Mount, Black Polymer | 416A08BK | UPC 604544683400

Meta Description (SEO)

Secure your holster with the Blackhawk Stache Non-Tuckable Belt Clip. 1.75" screw-mount design, rugged black polymer construction, and stable retention for EDC, range, and plainclothes use. Model 416A08BK, UPC 604544683400.

Structured Data (JSON-LD)

json
Copy code
{
  "@context": "https://schema.org",
  "@type": "Product",
  "name": "Blackhawk Stache Non-Tuckable Belt Clip 1.75\" Screw-Mount",
  "sku": "416A08BK",
  "gtin12": "604544683400",
  "brand": { "@type": "Brand", "name": "Blackhawk" },
  "category": "SportingGoods",
  "description": "Non-tuckable 1.75-inch screw-mount belt clip for Blackhawk Stache and compatible holsters. Durable black polymer with low-profile design for stable retention.",
  "material": "Polymer",
  "color": "Black",
  "additionalProperty": [
    { "@type": "PropertyValue", "name": "Belt Size", "value": "1.75 in" },
    { "@type": "PropertyValue", "name": "Mounting", "value": "Screw-mount" },
    { "@type": "PropertyValue", "name": "Clip Type", "value": "Non-tuckable" }
  ],
  "itemCondition": "https://schema.org/NewCondition"
}

Stable, strong, and purpose-built—the Blackhawk Stache Non-Tuckable 1.75" Belt Clip locks your holster in place so your draw stays consistent and your gear stays put.

The End