Bore-Nado Rifle Barrel Cleaning Rope — 8mm / .338 Caliber | Model 70723 | UPC 026509067337

Clean your rifle bore fast—with range-bag convenience and shop-bench results. The Bore-Nado Rifle Barrel Cleaning Rope (8mm / .338) is a compact, pull-through bore cleaner engineered to remove carbon, copper fouling, and powder residue in just a few passes. Sized specifically for 8mm and .338-caliber rifles, this reusable rope combines abrasive-safe woven floss with an embedded scrubbing section (and a weighted leader) to deliver a smooth, chamber-to-muzzle pull that protects the crown while cutting cleaning time in half.

Why Shooters Choose Bore-Nado

• Caliber-correct fit (8mm / .338): Optimized diameter and drag for efficient contact with lands and grooves—no sloppy fit or over-tight pull.

• Fast pull-through cleaning: Drop the weighted brass leader through the chamber, pull from muzzle to breech, and you’re done—no rods, no jags, no patch mess.

• Built-in scrubbing power: A dedicated abrasive-safe scrub band agitates stubborn fouling, followed by long high-absorbency floss that wipes the bore clean in a single pass.

• Protects your rifle: Soft, non-marring materials and crown-friendly pull-through motion reduce the risk of throat and muzzle wear.

• Solvent friendly & reusable: Works with your favorite bore solvent or CLP; simply hand-wash and air-dry to reuse.

• Range-ready size: Rolls up small to ride in your pack, range bag, or buttstock pouch for quick touch-ups between strings.

Perfect For

• Precision rifles in .338 and 8mm (e.g., .338 Win. Mag., .338 Lapua Mag., 8x57 JS)

• Backcountry hunts where lightweight, packable gear matters

• Range sessions & matches requiring quick, on-the-line fouling control

• Routine maintenance without breaking out full rod kits

How to Use (3 Quick Steps)

1. Unload & verify clear. Remove the bolt if possible for straight-through access.

2. Add solvent to the scrub band if desired; feed the weighted leader from chamber to muzzle.

3. Pull straight through in one smooth motion; repeat 1–3 passes until patches/inspection show a clean bore. Lightly oil if storing.

Pro Tip: For heavy copper fouling, pre-treat with your preferred copper solvent, let dwell per instructions, then run the Bore-Nado for a final wipe and dry pass.

Maintenance & Care

• Hand-wash with mild soap after solvent-heavy sessions; air-dry completely.

• Store in a ventilated pouch; avoid prolonged exposure to harsh chemicals.

• Inspect the rope periodically—replace if you see fraying or excessive wear.

Key Features at a Glance

• Caliber: 8mm / .338 rifles

• Design: Pull-through cleaning rope with weighted leader

• Scrub Section: Integrated, abrasive-safe band for stubborn fouling

• Body: Long, high-absorbency woven floss for wipe-down and oiling

• Reusable: Solvent-compatible; washable and quick-dry

• Model / SKU: 70723

• UPC: 026509067337

Compatibility Guide (Examples)

• .338 Caliber: .338 Win. Mag., .338 Federal, .338 Lapua Mag., .338-06

• 8mm: 8x57 JS (7.92 Mauser), 8mm-06, 8x57 JRS (verify bore dimensions)

• Always confirm your rifle’s true bore diameter and follow manufacturer cleaning recommendations.

Safety Notes

• Clean only from chamber to muzzle to protect the crown.

• Do not fire immediately after heavy oiling; run a dry pass to remove excess lubricant.

• Dispose of heavily contaminated wash water responsibly.

Specifications

SEO Highlights (for Merchandising & Search)

Bore-Nado rifle barrel cleaning rope 8mm .338, pull-through bore cleaner .338 Lapua, .338 Win Mag cleaning rope, 8mm Mauser bore snake alternative, chamber-to-muzzle weighted leader, reusable rifle bore cleaner, SKU 70723, UPC 026509067337, fast rifle cleaning tool, carbon and copper fouling remover.

Clean smarter—not harder. The Bore-Nado 8mm/.338 Cleaning Rope gives you quick, crown-safe, solvent-ready bore maintenance anywhere your rifle goes.
The End