Bore Tech Black Powder Solvent — 16 oz Squeeze Bottle (Model BTCJ21016 | UPC 667739210164)

Cut through stubborn fouling the smart way. Bore Tech Black Powder Solvent is a modern, water-based cleaner engineered specifically for black powder and black powder substitute residues (Pyrodex®, Triple Seven®, etc.). In a convenient 16 oz squeeze bottle, this high-performance formula attacks the corrosive salts, carbon, sulfur, and lubricant buildup that traditional soaps can leave behind—without harsh odors, ammonia, or petroleum solvents. Whether you run cap-and-ball revolvers, muzzleloaders, or black powder cartridge rifles, BTCJ21016 helps you clean faster, protect better, and shoot more.

Why Shooters Choose Bore Tech for Black Powder

• Purpose-Built Chemistry: Formulated to neutralize corrosive salts and dissolve carbon/sulfur fouling common to black powder and substitutes.

• Fast-Acting & Residue-Free: Penetrates into rifling and tight corners, lifting fouling so patches come out cleaner, quicker—no greasy film left behind.

• Water-Based & Odor-Controlled: Ammonia-free, petroleum-free solution that’s safer for your shop and less offensive in enclosed spaces.

• Metal-Safe Protection: Helps inhibit rust after cleaning when used as directed; safe for carbon steel, stainless, and modern barrel finishes.

• Squeeze-Bottle Precision: The 16 oz bottle dispenses easily into patch jags, on nylon/bronze brushes, or down the bore without waste or mess.

Perfect For

• Cap-and-ball revolvers (Colt- and Remington-pattern), muzzleloading rifles & pistols, black powder cartridge rifles/shotguns, and pyrodex/Triple Seven users.

• Range days, reenactments, and matches where you need fast turnaround and dependable protection.

• Collectors & restorers wanting modern cleaning performance that respects vintage steel and finishes.

How to Use (Quick Guide)

1. Unload & Verify Clear: Ensure the firearm is completely unloaded and uncapped.

2. Pre-Soak: Apply solvent to a patch and run through the bore from breech to muzzle (or as your platform allows) until fully wetted.

3. Scrub: Use a nylon or bronze brush saturated with solvent to loosen fouling; focus on chamber, cylinder, nipple/flash channel areas for percussion guns.

4. Patch Out: Push clean patches until they emerge light gray/white. Re-apply if heavy residue persists.

5. Dry & Protect: Run a dry patch, then apply your preferred corrosion inhibitor or light gun oil to metal surfaces.

Pro Tip: For cap-and-ball revolvers, remove the cylinder and nipples for direct access—solvent will make short work of crusted salts and carbon inside the threads and flash passages.

Black Powder Cleaning Tips

• Clean the same day: Black powder and substitutes are hygroscopic—they attract moisture and can cause rust quickly.

• Mind the small parts: Nipples, cones, breech plugs, and flash channels trap salts; soak briefly, brush, then flush with solvent.

• Finish strong: After drying, apply a light protectant to bore, exterior steel, and small parts; recheck in 24 hours and wipe if any residue weeps out of pores/threads.

Compatibility & Safety

• Safe on common gun metals and finishes when used as directed.

• Compatible with brass, bronze, nickel, stainless, blued, Cerakote®, and polymer frames/stocks. (Test in an inconspicuous spot if unsure.)

• Do not ingest. Avoid eye/skin contact. Keep away from children and pets. Use with adequate ventilation.

Specifications

• Brand: Bore Tech

• Product: Black Powder Solvent

• Volume: 16 oz (473 ml)

• Container: Squeeze bottle for controlled application

• Formula: Water-based, ammonia-free, petroleum-free

• Model #: BTCJ21016

• UPC: 667739210164

What’s in the Bottle

• Bore Tech Black Powder Solvent — 16 oz (squeeze bottle)

• Usage directions on the label

Who It’s For

• Muzzleloader and black powder enthusiasts wanting faster, deeper cleans

• Reenactors & competitors who need reliability and rust prevention between volleys

• Collectors & hobbyists protecting heirlooms with a non-harsh cleaning routine

SEO-Friendly Keywords (Use Naturally on Your Product Page)

Bore Tech Black Powder Solvent 16 oz, BTCJ21016, black powder firearm cleaner, Pyrodex solvent, Triple Seven solvent, water-based muzzleloader cleaner, ammonia-free bore solvent, UPC 667739210164, black powder residue remover, corrosion prevention gun solvent.

Clean faster, protect better, and shoot more with Bore Tech Black Powder Solvent (16 oz)—a purpose-built, water-based formula that crushes corrosive fouling and keeps your muzzleloaders and cap-and-ball revolvers ready for the next volley.

The End