Bore Tech Blast Degreaser 10 fl oz Aerosol BTCD50015

Bore Tech Blast Degreaser — 10 fl oz Aerosol (BTCD50015 | UPC 667739500159) Cut through stubborn oils, grease, and gunk in seconds with Bore Tech Blast Degreaser, the fast-evaporating, high-power cleaner trusted by shooters, armorers, and shop techs. This 10 fl oz aerosol delivers a focused spray that flushes away carbon, petroleum residues, assembly lubricants, and shop grime from metal surfaces—leaving parts clean, dry, and ready for finishing, lubrication, or inspection. If you want a quick, residue-free prep before blueing, cerakote, re-lube, or reassembly, BTCD50015 is your go-to can. Why Choose Bore Tech Blast Degreaser Fast-evaporating formula: Dries quickly and cleanly so you can move straight to lubrication or protective coatings. Residue-free finish: Leaves parts squeaky clean—no film to compromise torque values or attract dust. High-pressure stream: Penetrates tight tolerances, pins, springs, and crevices to lift out hidden contaminants. Ideal prep step: Perfect before mounting optics, applying threadlocker, installing brakes/compensators, or final wipe-downs. Shop & field friendly: Compact 10 fl oz size rides easily in the range bag or toolbox for on-the-spot maintenance. Metal-safe cleaning: Formulated for steel and most common firearm metals.* *As with any degreaser, test on a small, inconspicuous area of polymer, painted, anodized, or coated parts to confirm finish compatibility. Key Specs at a Glance Product: Bore Tech Blast Degreaser Volume: 10 fl oz aerosol Format: High-pressure spray, quick-dry, residue-free Model: BTCD50015 UPC: 667739500159 Use: Degreasing metal parts prior to lubrication, assembly, finishing, or storage Built for Real-World Maintenance Whether you’re stripping a bolt carrier, prepping a trigger group, degreasing a muzzle device, or cleaning scope ring/rail interfaces before applying torque, Blast Degreaser helps you get consistent, repeatable results. A clean surface means truer torque readings, better threadlocker performance, and fewer malfunctions due to oil-soaked fouling. It’s equally handy for choke tubes, gas system components, extractor channels, and magazine bodies—anywhere residue likes to hide. Typical Applications Pre-lube prep: Remove packing oils or prior lubricants before applying fresh oil/grease. Optics mounting: Degrease rings, bases, screws, and rail sections for maximum hold. Threadlocker prep: Clean threads on muzzle devices, action screws, and scope hardware. Action & bolt service: Flush out grit and old lube from bolt faces, lugs, firing pin channels (disassembled). Trigger/FCG work: Clean metal parts before reassembly (follow manufacturer guidance). Note: Avoid soaking wood stocks, painted markings, stickers, and non-metallic parts without prior compatibility testing. How to Use (Best Practices) Unload & disassemble the firearm or component per the manufacturer’s manual. Spray generously onto the metal surface from a moderate distance to push out oils and residue. Let evaporate—the quick-dry formula flashes off rapidly; use shop towels or compressed air if needed. Inspect & repeat for heavy carbon. Re-lube & protect: Apply the appropriate oil/grease to wear surfaces after degreasing. Safety & Handling Use in a well-ventilated area; avoid inhalation and open flames/heat sources. Wear eye protection; solvents under pressure can splash back from crevices. Store upright in a cool, dry place; keep out of reach of children. Follow all label directions and local disposal regulations for aerosol cans. What’s in the Can 1 × Bore Tech Blast Degreaser, 10 fl oz Aerosol — Model BTCD50015, UPC 667739500159 SEO-Friendly Highlights (Popular Search Terms) Bore Tech Blast Degreaser 10 oz, BTCD50015, fast-evaporating gun degreaser, residue-free firearm cleaner, metal parts degreaser aerosol, carbon and oil remover for guns, action and bolt degreaser, UPC 667739500159. Get professional-grade, residue-free cleaning in seconds with Bore Tech Blast Degreaser. From optic mounts and threads to bolts and gas components, this 10 fl oz quick-dry aerosol preps metal surfaces for reliable torque, secure adhesion, and smooth function—shot after shot, service after service. "The End"