Cast .38 Caliber Handgun Bullets – Round Nose Flat Point (RNFP) – Hard-Cast Lead Reloading Components – SKU 100200024

Build smooth-feeding, accurate .38/.357 handloads with Cast .38 Caliber Round Nose Flat Point (RNFP) bullets—favored by revolver shooters, lever-gun fans, and cowboy-action competitors for their reliability and clean performance. The RNFP geometry blends the feeding friendliness of a round nose with a safe, flat meplat that plays well with tube-fed magazines and steel targets. SKU 100200024 delivers consistent weights, uniform bearing surfaces, and a defined crimp groove, giving handloaders the repeatability they need for tight groups and dependable function.

Why RNFP for .38/.357? You get lever-action compatibility, positive case crimping, and clean holes on paper—with smooth chambering in both revolvers and carbines.

Key Benefits

• Lever-gun friendly: RNFP profile feeds reliably in tube-magazine lever rifles, minimizing hang-ups common to sharp-shouldered bullets.

• Revolver ready: Flat meplat and consistent ogive support reliable ignition, predictable POI, and clean target feedback.

• Tight tolerances: Uniform weight and diameter help deliver low ES/SD and repeatable accuracy across a wide charge range.

• Crimp groove control: A pronounced cannelure promotes secure roll crimping to maintain OAL in magnum recoil and rapid cycling.

• Economical training: Hard-cast construction keeps costs down for high-volume practice without sacrificing reliability.

Ideal Use Cases

• .38 Special target and practice loads that emphasize comfort and precision.

• .357 Magnum mid-range recipes for field carry or action-oriented drills (within published data).

• Cowboy action stages where lever-gun and revolver compatibility matters.

• Steel practice (where permitted) thanks to a flat meplat and moderate velocities.

Performance Highlights

• Uniform bearing surface for consistent neck tension and seating depth.

• Clean, flat-point impacts for decisive knockdown on rated steel and crisp paper holes.

• Balanced recoil impulse that helps newer shooters build fundamentals without fatigue.

Specifications (At-a-Glance)

• Caliber: .38 / .357 (handgun)

• Bullet Style: RNFP – Round Nose Flat Point

• Construction: Hard-cast lead (plain base)

• Diameter: Typically .357–.358" (verify lot and size to fit your firearm)

• Crimp: Dedicated crimp groove/cannelure for firm roll crimp

• Intended Cartridges: .38 Special, .357 Magnum

• SKU: 100200024

Exact weight and diameter can vary slightly by production lot. Measure and size to your barrel/cylinder throats for best accuracy and minimal leading.

Handloading Notes (Read First)

• Use current manuals: Always reference up-to-date, reputable reloading data for RNFP cast bullets in .38 Special/.357 Magnum. Start low and work up carefully.

• OAL & crimp: Seat to the crimp groove and apply a firm roll crimp—critical for lever-gun function and magnum recoil resistance.

• Fit over force: Best accuracy and reduced leading typically occur when bullets are sized ~0.001" over groove diameter (revolver note: consider cylinder throat size).

• Velocity vs. alloy: Match bullet hardness to intended velocity; moderate speeds often yield the cleanest barrels with plain-base cast bullets.

• Chronograph: Confirm power factor for competition and monitor ES/SD when changing components or lot numbers.

Safety First: Wear eye protection at the bench. Label powders, primers, and finished rounds clearly. Follow all local laws and range rules.

Tips for Lever-Action Success

• Nose profile: RNFP is ideal for tube magazines; flat meplat helps prevent primer contact in stacked cartridges.

• Reliable cycling: Confirm OAL cycles smoothly by hand before live fire; adjust crimp and seating depth as needed.

• Sight zeros: Record supers/standard-pressure holds for common stage distances (10–50 yards).

Storage & Handling

• Cool, dry environment to preserve surface finish and prevent oxidation.

• Organize by lot: Keep bullets labeled by lot/date to track load development.

• Gentle cleaning: No harsh solvents required; avoid chemicals that could alter surface finish.

Who These Bullets Are For

• New and experienced reloaders seeking a dependable, budget-friendly projectile for .38/.357.

• Cowboy action shooters who need smooth feeding between revolver and lever-gun.

• Instructors & clubs stocking reliable bullets for high-rep training.

• Range enthusiasts who want consistent, clean-cutting impacts on paper and properly rated steel.

FAQ (Quick Answers)

• Will these work in lever-action .357 rifles? Yes—the RNFP nose is specifically favored for tube magazines.

• Do I need to crimp? Yes—use a firm roll crimp into the groove for consistent ignition and to prevent movement under recoil.

• What diameter should I use? Many .38/.357 platforms prefer .358", but measure your throats and barrel to confirm.

SEO Highlights (Quick Scan)

• Cast .38 caliber RNFP bullets for .38 Special and .357 Magnum

• Hard-cast lead, crimp groove, lever-gun friendly profile

• Smooth feeding, clean accuracy, economical high-volume practice

• SKU 100200024

Suggested Meta Title

Cast .38 Caliber RNFP Bullets – Hard-Cast Lead for .38 Special & .357 Magnum | SKU 100200024

Suggested Meta Description

Load smooth-feeding, accurate .38/.357 rounds with cast RNFP bullets. Hard-cast lead with crimp groove—ideal for revolvers, lever guns, cowboy action, and high-volume practice. SKU 100200024.

The End