CHASERS HAMMERS 40746280

The Friedr. Dick GmbH 1-1/8" Chasers Hammer – Mfr. No. 40746280 is a professional-grade chasing and gunsmithing hammer engineered for ultra-precise, light tapping work. With a polished dual-face steel head and a perfectly balanced hardwood handle, this premium tool gives engravers, silversmiths, jewelers, and gunsmiths day-long control over every strike. Primary Tactical+1 Precision Chasing Hammer for Fine, Ultra-Controlled Tapping This chasers hammer is widely used on the benches of engravers, silversmiths, and other artisans who rely on delicate, accurate blows instead of brute force. It’s ideal for: Primary Tactical+1 Gunsmiths doing sight, pin, and small-part work Engravers tapping chasing tools with controlled, repeatable strikes Silversmiths and jewelers shaping and texturing metal without leaving unwanted marks Any craftsman who needs light, ultra-precision tapping rather than heavy hammering If you routinely work on fine details where a single mis-strike can ruin a part, this hammer is built exactly for that kind of work. 1-1/8" Large Flat Face – See Your Work While You Strike The 1-1/8" (approx. 2.9 cm) flat face gives you a generous striking surface while still remaining compact and easy to control. That larger face makes it easier to strike tools squarely while keeping full view of the workpiece. Primary Tactical+1 Large, flat face for easy, accurate contact Lets you watch your work and your tool at the same time Reduces “edge hits” and mis-strikes on small chasing tools or punches For anyone doing engraving or fine gunsmithing, that combination of visibility and accuracy is a big upgrade over generic hammers. Dual Polished Faces – Flat & Round for Versatile Use The Friedr. Dick chasers hammer features two highly polished faces: one flat and one slightly rounded. Both are smooth finished to help prevent marring sensitive surfaces. Primary Tactical+1 Flat face – perfect for striking chasing tools, punches, and small drifts Round face – useful for more focused contact and light forming or planishing work Polished steel resists sticking and helps minimize unwanted marks on tools and workpieces This dual-face design lets you switch from controlled tapping to subtle shaping without ever changing tools. Balanced Hardwood Handle with Oval, Tapered Profile The handle is crafted from durable hardwood, shaped into an oval profile that tapers more slenderly near the head. That shape is specifically chosen to promote a lively, controllable rebound and natural alignment in the hand. Primary Tactical+1 Oval cross-section naturally guides your grip into the right orientation Taper near the head improves rebound and feedback Smooth hardwood finish is comfortable for all-day bench work Combined with the carefully matched head weight, the handle design gives the hammer excellent balance, making it easier to recover from a bad tap and keep delicate work safe. Brownells UK Built for Day-Long Control and Reduced Fatigue Friedr. Dick describes this chasers hammer as designed and balanced for long sessions of precise tapping, not heavy, fatiguing blows. Primary Tactical+1 What that means for you: Light overall weight reduces wrist and hand strain Balanced center of gravity makes each stroke feel natural and predictable Easy to control even during very fine, repeated strikes on tiny parts or tools For engravers or gunsmiths working under magnification, the ability to tap confidently for hours without fighting the tool is a major advantage. Durable Steel Head & 10" Overall Length This is a hammer designed for serious, long-term bench use: Steel head for durability and crisp rebound Primary Tactical+1 Hardwood handle stands up to shop life while staying comfortable in hand Primary Tactical+1 Approx. 10" (25.4 cm) overall length, giving just the right combination of leverage and finesse Primary Tactical+1 That length feels natural for bench-top work—long enough for smooth arcs, short enough for fine control close to the work. Ideal For Gunsmithing, Engraving & Fine Metalwork The Friedr. Dick 1-1/8" Chasers Hammer (40746280) is perfectly suited for a wide range of precision tasks: Brownells UK Gunsmithing Adjusting sights and small pins Light tapping on frames, slides, and small components Working with punches without over-driving or marring parts Engraving & Silversmithing Striking chasing tools with uniform, gentle blows Texturing and forming soft metals with excellent control Jewelry & Craft Work Delicate forming, embossing, and decorative work Tasks that demand a clean, polished hammer face If your work demands accuracy and finesse more than raw power, this hammer quickly becomes your go-to bench tool. Key Features & Specifications – Chasers Hammer 40746280 Product Name: Friedr. Dick GmbH 1-1/8" Chasers Hammer Primary Tactical+1 Brand: Friedr. Dick GmbH Manufacturer Part Number: 40746280 Brownells UK Category: Chasers / chasing hammer for engravers, silversmiths, jewelers, and gunsmiths Primary Tactical+1 Head Material: Polished steel, dual striking faces (flat & round) Primary Tactical+1 Handle Material: Hardwood, oval-shaped and slenderly tapered near the head Primary Tactical+1 Face Size: 1-1/8" (approx. 2.9 cm) flat face Primary Tactical+1 Overall Length: Approx. 10" (25.4 cm) Primary Tactical+1 Approx. Weight: Around 0.159 kg delivery weight (light, bench-friendly hammer) Brownells Österreich+1 Use Case: Light, ultra-precision tapping on metal and small tools If you’re searching for a high-quality chasing hammer for gunsmithing, engraving, or fine metalwork, the Friedr. Dick GmbH Chasers Hammer 1-1/8" (40746280) delivers the balance, control, and polished finish that serious craftsmen demand. Add it to your bench and experience how much better precise tapping feels with a hammer built specifically for that job. The End