CMMG BANSHEE Mk10 — 10mm Auto, 8" Threaded, M-LOK®, Glock-Mag Compatible, Coyote Tan Cerakote
Model/SKU: 10A570FCT | UPC: 810148623340
Serious power, compact footprint. The CMMG BANSHEE Mk10 in 10mm Auto delivers hard-hitting performance in a short, maneuverable platform built for reliability, suppressed versatility, and modern ergonomics. Featuring an 8" Black Nitride threaded barrel, free-float M-LOK® handguard, and rugged Coyote Tan Cerakote® aluminum receiver set with full-length Picatinny, this BANSHEE runs Glock-pattern 10mm magazines and comes ready with CMMG’s ZEROED™ grip for a confident hold in any condition.
Why Choose the BANSHEE Mk10 (10mm Auto)
10mm Auto authority: Delivers heavy energy and deep penetration from a compact barrel—ideal for protection, ranch use, and backcountry carry (where legal).
Radial Delayed Blowback™ (RDB): CMMG’s hallmark operating system tames recoil and reduces felt impulse, improving reliability and keeping the gun flatter than traditional blowback PCCs.
8" threaded barrel (Black Nitride): Optimized for velocity and balance; the Nitride finish resists corrosion and eases cleaning.
Free-float M-LOK® handguard: Rigid, lightweight rail for lights, lasers, hand stops, and sling QD points without contacting the barrel—better POI consistency.
Coyote Tan Cerakote® receivers: Durable, low-glare finish on the aluminum upper/lower stands up to weather, sweat, and hard use.
Glock-mag compatible: Uses widely available Glock-pattern 10mm magazines for easy sourcing and cross-compatibility with your sidearm.
ZEROED™ grip: Enhanced texture, undercut, and angle set your firing hand higher for improved control and trigger reach.
Key Specifications
Caliber: 10mm Auto
Capacity: 15+1 (Glock-pattern 10mm magazine)
Barrel: 8" medium-profile, Black Nitride, threaded (verify thread pitch before installing muzzle devices)
Operating System: CMMG Radial Delayed Blowback™, semi-automatic
Handguard: Free-float M-LOK® (length matched to barrel for compact handling)
Receivers: Aluminum with Coyote Tan Cerakote®; full-length Picatinny top rail
Controls & Furniture: CMMG ZEROED™ grip; AR-15 Mk4 pattern controls
Finish: Coyote Tan Cerakote receivers / black furniture
Model/SKU: 10A570FCT
UPC: 810148623340
Thread Note: Pistol-caliber barrels can use different thread pitches. Always confirm your barrel’s thread before installing a brake, compensator, or suppressor mount, and re-zero after any change.
Real-World Performance You’ll Notice
Soft, controllable recoil: RDB action and short barrel make the stout 10mm surprisingly manageable, enabling faster follow-ups.
Suppressor-friendly behavior: The delayed system helps reduce gas blowback and dot bounce when running suppressed (where legal).
Free-float accuracy: Accessories won’t shift your point of impact; expect consistent groups with quality ammo.
Duty-tough finish: Cerakote + Nitride steel shrug off rain, dust, and high round counts.
Ideal Use Cases
Home & property defense: Compact size, powerful cartridge, and modern ergonomics for confident control in tight spaces.
Ranch & backcountry: Serious energy for predators/varmints; verify local laws and appropriate ammunition.
Training & range: Run common Glock-pattern 10mm mags to simplify logistics; log velocities for dope.
Suppressor setups: Short barrel + 10mm flexibility make a compelling suppressed platform (where permitted).
Setup Recommendations
Optics: A rugged red dot (with optional 3× magnifier) or a 1–6× / 1–8× LPVO suits the BANSHEE’s effective ranges.
Muzzle Device: Choose a flash hider for low-light work, a brake/comp for fast drills, or a suppressor (verify threads and alignment).
White Light: Mount a compact, high-candela light on M-LOK at 3 or 9 o’clock for PID.
Support Gear: Two-point QD sling, slim hand stop for index, and quality Glock-pattern 10mm magazines from reputable makers.
Ammunition: Test a spread of loads—180–200gr JHP for defense, FMJ/flat-point for training; chronograph to build accurate holds.
Zeroing & Best Practices
Zero distance: A 25–50-yard zero works well for 10mm PCC ballistics; validate at 75–100 yards for refined holds.
Function test: Prove reliability with your actual defensive/hunting load and each magazine you plan to carry.
Mark hardware: Paint-pen optic screws, handguard fasteners, and mounts to detect movement after classes or travel.
Magazine labeling: Clearly mark 10mm mags; inspect feed lips and springs periodically.
Maintenance & Care
BCG & internals: Keep rails, cam pin surfaces, and contact points lightly lubricated—especially for suppressed use.
Barrel & crown: Clean after range days; Nitride eases carbon removal.
Handguard & M-LOK: Re-torque accessory screws after heat cycles; confirm no contact with the barrel.
Compliance & Safety
Follow all local/state/federal laws regarding barrel length, suppressor ownership, magazine capacity, and transport.
Always verify unloaded status before maintenance; confirm thread pitch and suppressor alignment prior to firing.
Re-zero any time you change muzzle devices, optics, or ammo.
SEO Highlights (For Shoppers & Merchandisers)
Primary Keywords: CMMG BANSHEE Mk10 10mm Auto, 8" threaded barrel, M-LOK handguard, Glock magazine compatible, Coyote Tan Cerakote, 10A570FCT, UPC 810148623340.
Related Keywords: 10mm AR pistol/SBR, Radial Delayed Blowback PCC, free-float M-LOK PCC, Picatinny top rail, CMMG ZEROED grip.
Value Propositions: Powerful 10mm in a compact platform, RDB recoil reduction, durable Nitride/Cerakote build, Glock-mag convenience, optics-ready layout.
What’s in the Box
CMMG BANSHEE Mk10 — 10mm Auto, 8" Black Nitride threaded barrel
Free-float M-LOK® handguard; Coyote Tan Cerakote® receiver set with Picatinny rail
CMMG ZEROED™ black grip; magazine (capacity may vary by region), owner’s manual & documentation
Exact contents can vary by distributor—confirm your specific package.
Compact size, maximum punch—the CMMG BANSHEE Mk10 (10mm, 8") is built to run fast, hit hard, and handle whatever the day brings, from ranch chores to range drills.
"The End"
