Crimson Trace CT RAD Dovetail Mounting Kit | Black | Universal-Style Rear Sight Dovetail Adapter for RAD Micro/Pro Optics | Model: 01-3000054 | UPC: 810048570621
Turn your pistol’s rear sight dovetail into a rock-solid optics platform with the Crimson Trace CT RAD Dovetail Mounting Kit (Black). Purpose-built for CT RAD™ family red dots (RAD Micro, RAD Micro Pro, RAD Pro, and select footprint-compatible models), this kit replaces your factory rear sight and provides a low, secure, and repeatable mounting surface—no custom slide milling required. If your handgun isn’t optics-ready, this is the cleanest path to a red dot while preserving your slide’s integrity and warranty.
Machined for durability and finished in matte black to blend with most slides, the CT RAD dovetail mount installs with common bench tools and includes the hardware you need to get your optic seated and zeroed quickly. Whether you’re upgrading a concealed-carry pistol, a range workhorse, or a training gun, this kit brings modern red-dot speed to traditional slides.
Why Choose the CT RAD Dovetail Mount
Optic-Ready—Without Milling: Convert the factory rear sight dovetail into a secure optics interface—no slide cuts or gunsmith milling required.
Designed for CT RAD Optics: Optimized for Crimson Trace RAD™ footprints so your red dot sits low and tight for fast acquisition and a natural presentation.
Rugged, Duty-Ready Build: Precision-machined mounting plate with a durable black finish resists sweat, solvents, and daily carry wear.
Repeatable Zero: Properly installed, the rigid dovetail fit and included hardware support consistent return-to-zero through training and carry cycles.
Clean Aesthetics: Low-glare, matte black finish blends with the slide for an OEM-style look.
Great for Non-Optics-Ready Pistols: Ideal when your slide lacks an optics cut or you want to avoid permanent modifications.
Compatibility note: Dovetail dimensions vary by pistol model and manufacturer. This SKU is for specific dovetail sizes; always verify fit for your handgun before purchasing.
Key Features at a Glance
Product Type: Rear sight dovetail adapter for pistol-mounted red dots
Optic Interface: Crimson Trace RAD™ footprint (RAD Micro/Micro Pro/RAD Pro; see CT spec for exact models)
Mount Location: Replaces rear sight in the slide dovetail
Finish/Color: Black, matte/low-glare
Installation: User-installable with standard bench tools; gunsmith install recommended for best fit and zero retention
Model: 01-3000054 (013000054)
UPC: 810048570621
Performance You Can Feel
Faster Sight Acquisition: Positioning your RAD optic over the factory dovetail gives a natural, heads-up sight picture that’s quicker than irons—especially in low light.
Lower Bore Offset: A low-sitting plate helps reduce holdover at close distances and aids in co-witness potential (depending on pistol/iron height).
Confidence Under Recoil: A snug dovetail fit and quality hardware mean your optic stays put during high round counts.
Ideal Use Cases
Everyday Carry: Add a high-visibility aiming reference to a proven CCW pistol without slide milling.
Training & Classes: Try red-dot pistol shooting before committing to a dedicated optics-cut slide.
Agency/Range Programs: Retrofit legacy pistols to optics economically and reversibly.
Installation Overview (Quick Guide)
Unload & Verify Clear. Always begin with an empty pistol.
Remove Rear Sight. Use a proper sight pusher or bench block and brass/nylon punch. Apply penetrating oil if needed.
Fit the Plate. Test-fit the CT RAD dovetail base from the manufacturer’s recommended direction (most slides install left-to-right; verify your model).
Secure & Center. Drive/push until centered; apply non-permanent thread locker to mounting screws. Torque to the spec in the CT instructions.
Mount the Optic. Install your RAD optic with the included screws; torque to spec.
Zero the Dot. Start at 10 yards, confirm at 25 yards (or your duty distance). Re-torque after the first range session.
If you don’t have a sight pusher or you encounter resistance, use a qualified gunsmith to avoid slide or finish damage.
Pro Tips for Best Results
Measure Your Dovetail: Manufacturers use different dovetail profiles (e.g., Glock, SIG, S&W, etc.). Confirm the exact variant supported by this SKU.
Use Correct Torque: Under/over-torquing can cause shifts. Follow the inch-pound values in the manual.
Witness Marks: Add a tiny paint mark across the plate/slide to quickly spot movement over time.
Battery & Zero Routine: Replace the optic battery on a schedule and confirm zero after major temperature swings or hard impacts.
Care & Maintenance
Hardware Checks: Inspect screws and re-torque after initial live fire; re-check every few hundred rounds.
Keep It Clean: Wipe carbon from the plate and optic base; avoid excess oil under the optic.
Protect the Lens: Use a microfiber cloth on the red-dot lens; avoid harsh chemicals.
Frequently Asked Questions
Q: Will this work with non-RAD optics?
A: It’s designed for the CT RAD™ footprint. Some third-party optics share or clone that pattern, but verify dimensions with the manufacturer before use.
Q: Can I co-witness my irons?
A: Co-witness depends on slide height, plate thickness, optic window, and iron height. Many standard-height irons will be low or out of view; suppressor-height irons improve the chance.
Q: Is thread locker required?
A: Yes—use non-permanent thread locker on mounting screws after your final alignment and torque.
Q: Will it hold zero?
A: A correctly fitted dovetail and properly torqued hardware provide excellent zero retention. Re-check after the first 100–200 rounds.
Q: Do I still need an optics-ready slide?
A: No—this kit is specifically for pistols without an optics cut, using the rear sight dovetail instead.
SEO Highlights (Quick Scan)
Crimson Trace CT RAD dovetail mounting kit, black, converts rear sight dovetail to a RAD red-dot interface
No slide milling, low-profile mount with repeatable zero and duty-ready construction
Ideal for EDC, training, and upgrading non-optics-ready pistols
Model 01-3000054 (013000054) | UPC 810048570621
Bring red-dot speed to your non-optics-ready pistol—without a mill job. The Crimson Trace CT RAD Dovetail Mounting Kit delivers a clean, secure, and reversible path to modern pistol optics so you can shoot faster, clearer, and more confidently.
"The End"
