CrossArmory 3-Piece Extended Kit — Compatible with Glock Gen4 — Red Anodized Steel / Aluminum (Model CRG4OKRD, UPC: 046139039221)

Give your Glock Gen4 a bold, high-performance control upgrade with the CrossArmory 3-Piece Extended Kit (CRG4OKRD) — a precision-engineered set of extended controls finished in eye-catching red anodized steel and aluminum. Designed for shooters who want faster manipulations, improved ergonomics, and a striking visual upgrade, this kit delivers extended magazine release, slide stop, and trigger guard or magazine well options (depending on kit variant) that fit Glock Gen4 models with minimal fitting. Ideal for competition, duty, or everyday carry builds, the CRG4OKRD balances function, durability, and style.

Product Snapshot — What You’re Buying

• Model: CRG4OKRD

• UPC: 046139039221

• Fitment: Compatible with Glock Generation 4 pistols (verify model-specific fit before ordering)

• Finish / Material: Red anodized steel and aluminum — corrosion-resistant, high-visibility accent parts

• Kit Type: 3-piece extended control set (extended magazine release, extended slide stop/slide release, and an enhanced trigger-guard or magwell piece depending on the CrossArmory configuration)

SEO keywords: CrossArmory Glock Gen4 extended kit, CRG4OKRD, extended magazine release Glock, red anodized Glock controls, Glock Gen4 upgrades, CrossArmory 3-piece kit.

Why Choose the CrossArmory CRG4OKRD?

CrossArmory is known for blending tactical function with distinctive styling — this 3-piece kit is built to:

• Speed up manipulations: Larger, extended controls make reloads and slide releases faster and more intuitive under stress or competition.

• Improve ergonomics: Thoughtful contours and length give better thumb engagement for shooters with larger hands or when wearing gloves.

• Add visual flair: Red anodized finish stands out on the range while resisting corrosion and wear.

• Maintain durability: Machined steel or aircraft-grade aluminum construction provides long service life and strong contact surfaces where it matters most.

Key Features & Benefits

• Extended Magazine Release: Faster magazine changes with tactile, positive engagement; larger surface area for quick activation.

• Extended Slide Stop / Release: Easier to reach and manipulate for efficient reloads and tap-rack drills; designed to work with standard Glock Gen4 internals.

• Enhanced Trigger-Guard / Magwell Component: Depending on kit variant, adds flared entry or refined trigger-guard geometry to aid reholstering and reload speed (check kit contents with vendor).

• Red Anodized Finish: Durable, corrosion-resistant anodizing that also helps identify controls quickly in low light.

• Robust Materials: Steel for high-stress interfaces (e.g., slide stop) and aluminum where a balance of light weight and strength is preferred.

• Precision Fit: Machined to fit Glock Gen4 dimensions for minimal fitting; designed for drop-in replacement in many standard Gen4 models.

Compatibility & Fitment Notes

• Designed For: Glock Generation 4 pistols (G17/G19/G22/G23/G34 etc. — verify specific model compatibility).

• Verification: While CrossArmory designs these parts for Gen4 ergonomics and pin geometry, always confirm part fit with your specific slide/frame/model and generation prior to installation. Some aftermarket frames or modified pistols (check threadless slides, stippling changes, or third-party parts) may require minor fitting or adjustment.

• Left/Right Considerations: Extended magazine releases are typically reversible on Glock Gen4 platforms; follow instructions for ambidextrous or left-hand configurations as needed.

Installation & Armorer Tips

• Skill Level: Moderate. A competent home armorer or gunsmith can perform installation with basic armorer tools. If you’re not comfortable, consult a qualified gunsmith.

• Tools Recommended: Punch set, small hammer, flathead/or Torx drivers (as required), bench block, and a clean work surface.

• General Steps:

  1. Ensure the pistol is cleared and unloaded — remove magazine and verify the chamber is empty.

  2. Field-strip the pistol per Glock manual and remove the factory parts you’ll replace.

  3. Install the CrossArmory components per supplied instructions, ensuring detents/springs are correctly oriented.

  4. Function check safety features, magazine release, slide stop engagement, and trigger reset.

  5. Conduct a live-fire verification from a safe range to confirm reliable operation.

• Tip: Use a small amount of thread locker where manufacturer suggests; avoid over-tightening small fasteners to prevent stripping the anodize.

Maintenance & Care

• Cleaning: Wipe anodized surfaces with a soft cloth after range sessions to remove oils and carbon. Avoid abrasive polishes that can wear the anodize.

• Lubrication: Apply lubrication per Glock’s maintenance schedule — extended controls do not usually require special treatment beyond routine cleaning and light lubrication at contact points.

• Inspection: Periodically check screws, springs, and the magazine-release engagement surface for wear. Replace springs and small parts if you observe degraded function.

• Finish Longevity: Anodizing resists corrosion but can scratch under heavy use — treat the parts as you would other firearm finishes for best long-term appearance.

Ideal For

• Competition Shooters: Faster reloads and ergonomic advantages translate into speed gains on the course.

• Tactical / Duty Use: Enhanced controls reduce manipulation time and can be beneficial under stress.

• Everyday Carriers & Enthusiasts: Add tactile upgrades and a unique look while retaining familiar Glock ergonomics.

• Custom Builds: Coordinate red accents with other custom parts (slides, barrels, magazines) for a cohesive aesthetic.

Safety & Legal Reminder

Always comply with local, state, and federal laws regarding firearm modifications. Modifying controls that affect safety or operation should be done carefully; if you are unsure about any step, consult a certified gunsmith. After installation, perform regular function and safety checks to confirm safe operation.

Technical Summary (At-A-Glance)

• Model: CrossArmory CRG4OKRD

• UPC: 046139039221

• Compatibility: Glock Generation 4 pistols (verify model-specific fit)

• Kit Contents: 3-piece extended control set (magazine release, slide stop/release, trigger-guard/magwell piece — confirm exact items with vendor)

• Materials: Steel & aircraft-grade aluminum (application-dependent)

• Finish: Red anodized — corrosion-resistant, low-glare

• Installation: Drop-in for many Gen4 models; basic armorer tools recommended

Final Thoughts

If you want quicker reloads, crisper ergonomics, and a distinctive look for your Glock Gen4, the CrossArmory 3-Piece Extended Kit (CRG4OKRD) is a compelling upgrade. Combining robust materials, machine-precision fit, and vibrant red anodized accents, this kit offers both functional performance gains and a custom aesthetic that stands out on the line. Upgrade your controls, shave seconds off your manipulations, and do it with style.

The End