DNZ Freedom Reaper Picatinny Rail — Black Anodized, Savage (PR040)
Model: PR040 • UPC: 810037211870 • Brand: DNZ Products • Type: One-Piece Picatinny Scope Base • Finish: Black Anodized
Give your Savage rifle a rock-solid optic foundation with the DNZ Freedom Reaper Picatinny Rail (PR040). Precision-machined from quality aluminum and finished in durable black anodize, this one-piece scope base offers true MIL-STD-1913 slot geometry for broad compatibility with rings, one-piece mounts, red dots, and night/thermal accessories. Whether you’re building a lightweight predator rig, a backcountry hunting rifle, or a range-ready target setup, the PR040 delivers the rigidity, alignment, and repeatability you expect from DNZ.
Why the Freedom Reaper PR040 Stands Out
One-Piece Strength: A single billet rail spans the receiver for superior rigidity, helping maintain zero through recoil and temperature swings.
True Picatinny Profile: Precisely cut slots ensure secure clamping and consistent return-to-zero with modern mounts and accessories.
Black Anodized Durability: Hard, low-glare finish resists corrosion, solvents, and field abrasion for long service life.
Optimized Weight-to-Stiffness: Engineered to be light in the hand yet stiff under magnum recoil, ideal for hunting and field carry.
Savage-Specific Footprint: Footprint and screw pattern designed for the Savage receivers specified for PR040 (see compatibility notes below).
Easy, Confident Install: Clean machining and included hardware (typical) make alignment and torque jobs straightforward for builders and armorers.
Key Features at a Glance
Standard (0 MOA) Configuration unless otherwise noted in your product listing
Full-Length Rail for flexible eye relief and ring spacing
Low-Profile Edges to minimize snagging around scabbards, packs, and blinds
Precision Screw Pattern matched to the intended Savage actions/drill pattern
Wide Accessory Support: Works with rings, cantilever mounts, offsets, bubble levels, and clip-on/bridge accessories (where legal)
Technical Specifications
Brand/Series: DNZ Products — Freedom Reaper
Model: PR040
UPC: 810037211870
Rail Standard: Picatinny / MIL-STD-1913
Material: Billet aluminum
Finish: Black anodized (matte/low-glare)
Cant: Typically 0 MOA (verify listing)
Hardware: Mounting screws usually included (confirm package contents)
Compatibility Note: Confirm your exact Savage model, action length (short/long), receiver contour, and screw spacing against DNZ’s current PR040 fit chart before purchase/installation.
Ideal Use Cases
Hunting: Lightweight, rugged base for LPVOs and compact hunting optics—perfect for mountain, timber, or predator rigs.
Target/Range: Stable, repeatable platform for magnified optics, torque-verified ring setups, and data-driven load development.
Night/Predator Work: Picatinny slots support clip-on devices, IR illuminators, or offset red dots (check laws/regulations).
Installation Best Practices
Verify Fit: Match your rifle to the PR040 compatibility list (model, action length, hole spacing).
Degrease & Prep: Clean receiver holes and rail underside; chase threads if needed.
Dry Fit & Align: Set the rail; verify even seating and correct overhang/clearance.
Threadlocker & Torque: Apply a small amount of blue (medium) threadlocker. Torque base screws to commonly referenced rail specs (~20–25 in-lb) unless your rifle/DNZ specifies otherwise.
Cure & Recheck: Allow threadlocker to set; recheck torque after first range session and seasonal temperature swings.
If you’re unsure, a qualified gunsmith can install and level your optic quickly and safely.
Performance Advantages You’ll Notice
Reliable Zero: One-piece rigidity resists shift under recoil, impacts, and environmental changes.
Flexible Eye Relief: Full-length slots simplify ring spacing for proper head position and scope tube protection.
Future-Proof Modularity: Change optics, add accessories, or adjust mount position without swapping bases.
Care & Maintenance
Wipe down with a silicone cloth after wet or dusty trips.
Avoid harsh abrasives on the anodized finish.
Inspect slot corners and screw heads if you frequently move mounts; replace worn hardware as needed.
What’s in the Box*
*Package contents can vary by lot/retailer.
FAQs
Q: Does PR040 include built-in MOA?
A: It’s generally 0 MOA unless specifically labeled otherwise. Check your product listing for confirmation.
Q: Which Savage models does PR040 fit?
A: DNZ provides a fit chart for each base. Confirm your receiver’s action length and screw spacing match PR040.
Q: Are Weaver rings compatible?
A: Many Weaver-style rings clamp to Picatinny, but Picatinny-spec rings provide the best lockup. Check your ring manufacturer’s guidance.
SEO-Optimized Keywords & Phrases
DNZ Freedom Reaper PR040, DNZ Savage Picatinny rail black, one-piece scope base for Savage, MIL-STD-1913 Savage rail, DNZ Products rail PR040 810037211870, Savage rifle scope mount, lightweight aluminum Picatinny base, hunting scope rail Savage, precision scope base DNZ.
Short Meta Description
DNZ Freedom Reaper PR040—black anodized, one-piece Picatinny rail for select Savage rifles. Lightweight, rigid, and repeatable with true MIL-STD-1913 slots. UPC: 810037211870.
Buyer’s Quick Checklist
✅ Your Savage receiver matches the PR040 hole spacing/fit chart
✅ You want a one-piece, 0 MOA Picatinny base for maximum versatility
✅ You prefer black anodized durability with low glare
✅ You’ll torque with threadlocker (or have a gunsmith install)
Lock down your optic with the DNZ Freedom Reaper Picatinny Rail PR040—a sleek, strong, and modular foundation built for Savage performance.
The End
