DNZ Game Reaper 2 Scope Mount/Ring Combo — 30mm, Matte Black, Howa Fit (703TXH2)
Model: 703TXH2 • UPC: 810037212198 • Tube Size: 30mm • Finish: Matte Black • Type: One-Piece Base + Integral Rings
Give your Howa rifle a rock-solid optic foundation with the DNZ Game Reaper 2—a one-piece scope mount and ring combo engineered for strength, alignment, and repeatable zero. Precision-machined from a solid block of aluminum and finished in a tough matte black, the 703TXH2 eliminates the common “stacking tolerances” of separate bases and rings, delivering a lighter, stiffer, and more precise setup for hunting, predator work, and range days.
Why Hunters and Shooters Choose Game Reaper 2
One-Piece Precision: Base and rings are cut together for perfect concentricity and alignment—no shims, no lapping in most builds.
Lightweight & Rigid: Billet aluminum construction maximizes stiffness without unnecessary ounces—ideal for mountain hunts and field carry.
Repeatable Zero: The single-piece footprint resists shift from recoil, temperature swings, and hard knocks.
Matte Black, Low-Glare Finish: Won’t flash in sun or spook game; resists corrosion and common cleaning solvents.
True 30mm Interface: Precisely bored rings protect scope tubes while ensuring reliable clamping and tracking.
Clean Howa Footprint: Designed for the Howa receiver pattern specified for model 703TXH2 (see compatibility notes).
Key Features at a Glance
Type: One-piece scope mount + rings (integral)
Tube Diameter: 30mm
Material: Precision-machined billet aluminum (commonly 6061-T6)
Finish: Matte Black (low-glare)
Height/Profile: Optimized by DNZ for typical ocular bell/bolt-handle clearance*
Hardware: High-grade ring cap and base screws included (typical)
Made for: Howa actions listed on DNZ’s fit chart for 703TXH2
*Exact height and clearance vary by scope objective size and rifle model; always confirm with your optic and rifle.
Compatibility Notes
Receiver: Select Howa bolt-action rifles matching the 703TXH2 hole spacing and contour (verify short/long action where applicable).
Scopes: Any 30mm main-tube optic (LPVOs, hunting scopes, tactical variables).
Accessories: Pairs well with hunting glass, lightweight variables, and compact turrets.
Always confirm your exact rifle model, action length, and screw pattern against DNZ’s current 703TXH2 fit chart before purchase or installation.
Installation Best Practices
Verify Fit & Clearance: Dry-fit the mount; check bolt-handle and objective-bell clearance with your scope in place.
Degrease & Prep: Clean receiver threads and mount surfaces; remove oils that can affect torque.
Base Screws: Apply a small amount of blue (medium) threadlocker and torque to common base specs (~20–25 in-lb), unless DNZ/rifle maker specifies otherwise.
Set the Scope: Level the rifle, set eye relief, level the reticle.
Ring Caps: Tighten caps evenly in an “X” pattern to ~15–18 in-lb (unless DNZ/scope maker lists a different spec).
Cure & Recheck: Allow threadlocker to set, then confirm torque after your first range trip and seasonal temperature swings.
If you’re unfamiliar with mounting optics, a qualified gunsmith can install and level the setup quickly and safely.
Real-World Advantages You’ll Notice
Less Weight, More Strength: One piece means fewer parts to loosen, shift, or corrode.
Smooth Tracking & Return-to-Zero: Better alignment reduces stress on scope internals for consistent dialing and holding.
Clean Lines, Low Profile: No extra bases or adapters—just a tidy, purpose-built footprint on your Howa.
Care & Maintenance
Wipe the mount after wet or dusty hunts; avoid harsh abrasives on the anodized surface.
Periodically verify screw torque (especially after heavy recoil sessions).
Inspect ring interfaces if you change optics frequently; replace any hardware that shows damage.
What’s in the Box*
DNZ Game Reaper 2 30mm Scope Mount/Ring Combo — 703TXH2 (Matte Black)
Mounting hardware (base screws, ring cap screws)
Basic setup guide
*Contents may vary by retailer/lot—check your product listing.
FAQs
Q: Do I need separate scope rings?
A: No. Game Reaper 2 integrates the base and rings into a single, precision-machined unit.
Q: Will this fit my Howa model?
A: Check DNZ’s 703TXH2 fit chart for your specific action length and screw spacing.
Q: Do I need to lap the rings?
A: Because the base and rings are cut together, lapping is usually not required. Always verify fit with your scope.
Q: What torque should I use?
A: As a general guide, ~20–25 in-lb for base screws and ~15–18 in-lb for ring caps—follow DNZ and your scope maker’s specs if they differ.
SEO-Optimized Keywords & Phrases
DNZ Game Reaper 2 703TXH2, DNZ 30mm Howa mount, one-piece scope mount Howa, matte black DNZ mount, 30mm integral rings for Howa, lightweight billet scope mount, hunting scope mount Howa, precision scope rings 30mm, 810037212198, Game Reaper 2 Howa 30mm.
Short Meta Description
DNZ Game Reaper 2 (703TXH2)—matte black, one-piece 30mm scope mount/ring combo for select Howa rifles. Lightweight, rigid, and repeatable alignment with included hardware. UPC: 810037212198.
Buyer’s Quick Checklist
✅ Your Howa receiver matches the 703TXH2 fit chart
✅ You need an integral one-piece mount to cut weight and complexity
✅ Your optic has a 30mm main tube
✅ You’ll torque to spec with threadlocker (or use a gunsmith)
Lock down your glass with the DNZ Game Reaper 2 703TXH2—a sleek, strong, and purpose-built mount that keeps your Howa shooting true.
The End
