DNZ Game Reaper – Savage Scope Mount/Ring Combo — 1", Matte Black
Model: L16200 • UPC: 810037212358 • Tube Size: 1 inch • Finish: Matte Black • Type: One-Piece Base with Integral Rings • Fit: Savage (see compatibility notes)
Level up your Savage rifle with the DNZ Game Reaper – Scope Mount/Ring Combo (L16200), a lightweight, precision one-piece mount designed to deliver rock-solid alignment, repeatable zero, and reduced weight compared to traditional base + ring stacks. Machined from a single block of billet aluminum and finished in durable matte black, this 1" integral mount keeps your optic secure through recoil, weather, and hard field use—without the bulk or tolerance stacking of multi-part systems.
Why Choose the DNZ Game Reaper (L16200)
One-Piece Precision: Base and rings are cut together for concentric alignment—no shims, fewer headaches, and lapping is usually unnecessary.
Rigid & Lightweight: Billet aluminum keeps ounces off your rifle while offering excellent stiffness for dependable tracking and zero holding.
Matte Black Durability: Low-glare, corrosion-resistant finish stands up to rain, dust, solvents, and season after season of hunts.
True 1" Ring Bores: Precisely machined to protect your scope tube and help your turrets track accurately.
Savage-Specific Footprint: Mounting pattern and geometry tailored for the Savage receivers listed by DNZ for L16200 (verify fit below).
Consistent Return to Zero: A single, solid interface helps resist shift from recoil and temperature swings.
Key Features at a Glance
Type: One-piece scope mount + rings (integral)
Tube Diameter: 1 inch
Material: Precision-machined billet aluminum
Finish: Matte Black (low-glare, corrosion resistant)
Height/Objective Clearance: Optimized by DNZ for common hunting optics*
Hardware: Quality base screws and ring cap screws typically included
Use Case: Hunting, predator/night work (where legal), range zeroing, and general field use
*Always confirm clearance for your objective bell, eyepiece, and bolt handle with your specific scope and rifle.
Compatibility Notes
Rifle Platform: Select Savage bolt-action receivers that match the L16200 hole spacing and contour.
Scope Tubes: 1" main tubes (popular hunting scopes, compact variables, and LPVOs with 1" bodies).
Action Length: Confirm short or long action and hole spacing against DNZ’s current fit chart for L16200.
Pro Tip: Before ordering, verify your exact Savage model, receiver drilling/tapping pattern, and action length match DNZ’s L16200 specification.
Installation Best Practices
Dry Fit & Level: Place the mount on the degreased receiver; verify full foot contact and proper overhang.
Threadlocker & Torque: Apply a small amount of blue (medium) threadlocker to base screws; torque to common base specs (~20–25 in-lb) unless DNZ or your rifle maker specifies otherwise.
Set Eye Relief & Level Reticle: Lightly seat the scope, set eye relief at highest magnification, and level reticle to the rifle.
Cap Screws Evenly: Tighten ring caps in an “X” pattern to ~15–18 in-lb (or as directed by DNZ/scope manufacturer).
Cure & Recheck: Allow threadlocker to cure; re-verify torque after first range session and seasonal temperature shifts.
Not comfortable mounting optics? A qualified gunsmith can install and level this setup quickly and correctly.
Real-World Advantages You’ll Notice
Fewer Parts, Fewer Problems: No separate bases or mismatched rings to introduce misalignment.
Stable Zero in the Field: One-piece rigidity helps your scope stay put through recoil and rough transport.
Cleaner Lines & Lower Weight: A tidy, integrated footprint pairs nicely with modern lightweight hunting builds.
Care & Maintenance
Wipe the mount after wet or dusty hunts; avoid harsh abrasives on the anodized finish.
Periodically verify screw torque, especially after significant temperature swings or heavy recoil sessions.
Inspect ring interfaces if you swap optics frequently; replace any worn or damaged hardware.
What’s in the Box*
DNZ Game Reaper – Savage 1" Mount/Ring Combo (L16200), Matte Black
Mounting hardware (base and ring cap screws)
Basic setup guide
*Package contents can vary by lot/retailer—check the specific listing.
FAQs
Q: Do I need separate rings?
A: No. The Game Reaper is an integral base + ring system.
Q: Do I have to lap the rings?
A: Since the base and rings are cut together, lapping is typically unnecessary. Verify fit with your scope.
Q: Will this fit my specific Savage model?
A: Confirm action length and hole spacing against DNZ’s L16200 fit chart before purchase.
Q: What torque should I use?
A: Common guidelines are ~20–25 in-lb for base screws and ~15–18 in-lb for ring caps—follow DNZ and your scope manufacturer’s specs if they differ.
Technical Specifications
Brand: DNZ Products
Series: Game Reaper (Savage)
Model: L16200
UPC: 810037212358
Tube Size: 1"
Material: Billet aluminum
Finish: Matte Black (anodized)
Design: One-piece base with integral rings
Fit: Select Savage bolt actions (verify on DNZ fit chart)
Use: Hunting, target/range, predator setups (where legal)
SEO-Optimized Keywords & Phrases
DNZ Game Reaper L16200, DNZ Savage scope mount 1 inch, one-piece scope mount for Savage, DNZ integral rings matte black, lightweight hunting scope mount 1", DNZ Products 810037212358, Savage bolt action optic mount, Game Reaper Savage 1 inch rings.
Short Meta Description
DNZ Game Reaper L16200—matte black 1" one-piece scope mount/ring combo for select Savage rifles. Lightweight, rigid, and precisely aligned for dependable zero. UPC: 810037212358.
Buyer’s Quick Checklist
✅ Your Savage receiver matches the L16200 hole spacing and action length
✅ Your scope has a 1" main tube
✅ You want a one-piece mount for less weight and better alignment
✅ You’ll use proper torque and threadlocker (or have a gunsmith install)
Lock your optic down the smart way with the DNZ Game Reaper – Savage 1" (L16200)—the clean, strong, and lightweight solution for dialing in a dependable hunting or range rifle.
The End
