Energetic Armament Direct Thread Adapter – 1/2×28 to 1.375×24 (HUB) – Titanium – Cerakote Black – EA22 – UPC 853406008220

Make your suppressor setup lighter, shorter, and more versatile. The Energetic Armament Direct Thread Adapter (EA22) converts a host barrel threaded 1/2×28 to the industry-standard 1.375×24 HUB suppressor thread pattern—delivering a compact, concentric, and highly durable interface for a wide range of modern rifle and pistol-caliber cans. CNC-machined from titanium and finished in black Cerakote, this mount is built to run cool, resist corrosion, and shrug off hard range days while helping preserve accuracy and return-to-zero consistency.

Why direct thread? Fewer parts, less weight, shorter OAL, and highly repeatable alignment. The EA22 keeps things simple and solid for precision shooters, hunters, and carbine owners who want dependable POI stability without a bulky QD system.

Key Benefits

• Universal HUB compatibility: Adapts your 1/2×28 barrel to the 1.375×24 suppressor thread standard used by many leading silencer manufacturers.

• Featherweight strength: Titanium construction keeps weight down and strength up—ideal for balancing the rifle and reducing leverage on the muzzle.

• Cerakote durability: Cerakote black finish resists heat, carbon, solvents, and environmental abuse with low-glare good looks.

• Concentric, precise fit: Tight-tolerance machining supports true bore alignment to help protect baffles and maintain accuracy.

• Compact profile: Minimal added length keeps overall system trim for field carry, storage, and vehicle operations.

Ideal Use Cases

• Precision & hunting rifles: Direct-thread consistency for cold-bore hits and stable dope.

• Training carbines & PCCs: Lightweight interface that stands up to high round counts and frequent removal/reinstall.

• Multi-host setups: Standardize your suppressor mounting across firearm platforms with the HUB ecosystem.

• Backcountry builds: Shave ounces and keep OAL manageable without sacrificing reliability.

Feature Highlights

• Barrel Threads (input): 1/2×28 (RH)

• Suppressor Threads (output): 1.375×24 (HUB standard)

• Material: Titanium (precision CNC-machined)

• Finish: Cerakote, black, low-glare

• Interface Type: Direct-thread (barrel-to-adapter-to-suppressor)

• Model / SKU: EA22

• UPC: 853406008220

Always verify your barrel’s thread pitch and shoulder geometry before installation. Some hosts and calibers require different pitches or spacers for proper timing and clearance.

Compatibility Notes

• Hosts: Barrels threaded 1/2×28—common on many 5.56/.223, .22LR, .22 WMR, 9mm PCCs (verify bore and pressure suitability).

• Suppressors: Any can using the 1.375×24 HUB rear pattern (check your silencer’s manufacturer and manual).

• Bore clearance: Ensure the suppressor’s bore and blast baffle are appropriate for your caliber. Never fire if any part of the system appears misaligned.

Installation (Quick Start)

1. Unload & verify clear. Safety first.

2. Prep the threads: Degrease barrel threads/shoulder and the adapter. Remove carbon and old thread compound.

3. Hand-start the adapter: Thread EA22 onto the 1/2×28 barrel by hand to avoid cross-threading.

4. Torque to spec: Follow Energetic Armament torque guidance. If recommended, apply a high-temp, non-permanent thread locker (e.g., Rocksett®) per instructions.

5. Attach your HUB suppressor: Thread your can (or HUB-compatible mount) onto the adapter; torque per the suppressor manufacturer.

6. Bore check: Remove the bolt/BCG and visually confirm concentric, unobstructed alignment through the barrel, adapter, and suppressor before live fire.

Pro Tip: Add a small witness mark across the adapter and barrel shoulder to quickly spot any rotation after heat cycles.

On-Range Advantages

• Repeatable zero: Direct-thread consistency helps minimize POI shift after removal/reinstallation.

• Better balance: Titanium keeps front-end weight and leverage low for steadier positional shooting.

• Less bulk: Short, clean profile that plays well with cases, scabbards, and field carry.

Maintenance & Care

• Post-session cleaning: Allow to cool; break carbon with a nylon/bronze brush and a carbon-safe solvent.

• Thread hygiene: Keep threads clean and lightly oiled for storage; avoid abrasive media that can gall titanium.

• Periodic checks: Inspect for peening, cross-threading, or carbon lock; re-torque after high round counts or hard use.

Safety & Legal

• Bore alignment matters: If you see eccentricity or contact marks, do not fire until corrected.

• Ammo & caliber: Use only ammunition suitable for your firearm and suppressor. Confirm caliber compatibility for all components.

• Know the law: Suppressor ownership/use is regulated. Follow all federal, state, and local laws (NFA where applicable).

Specifications (At-a-Glance)

• Brand: Energetic Armament

• Product: Direct Thread Adapter

• Input Threads: 1/2×28 (RH)

• Output Threads: 1.375×24 (HUB)

• Material: Titanium

• Finish: Cerakote Black

• Model/SKU: EA22

• UPC: 853406008220

Package contents and minor cosmetic details may vary by lot. Always follow the instructions included with your specific unit.

SEO Highlights (Quick Scan)

• Energetic Armament EA22 direct thread adapter

• 1/2×28 to 1.375×24 HUB suppressor mount

• Titanium, Cerakote black, concentric alignment, repeatable zero

• UPC 853406008220

Suggested Meta Title

Energetic Armament Direct Thread Adapter – 1/2×28 to 1.375×24 HUB, Titanium, Cerakote Black | EA22 | UPC 853406008220

Suggested Meta Description

Lighten and streamline your suppressor setup with the Energetic Armament EA22. Titanium direct-thread adapter converts 1/2×28 barrels to 1.375×24 HUB with Cerakote black durability and concentric alignment. Model EA22, UPC 853406008220.

The End