Energetic Armament Direct Thread Adapter, 9/16-24 Direct Threads, 1.375x24 Suppressor Threads, Titanium, Cerakote Finish, Black EA23

Energetic Armament Direct Thread Adapter – 9/16×24 (barrel) to 1.375×24 (suppressor) – Titanium – Black Cerakote (EA23) – UPC 853406008237 Turn precision into a repeatable standard. The Energetic Armament Direct Thread Adapter (EA23) lets you run a wide array of 1.375×24 (“HUB”-pattern) suppressors on barrels threaded 9/16×24—with the strength, concentricity, and corrosion resistance only titanium can deliver. Finished in a tough black Cerakote®, this adapter is purpose-built for shooters who want the simplest, lightest, most secure route to a direct-thread can mount without adding unnecessary bulk or compromising alignment. Why 1.375×24? It’s the industry’s most common universal suppressor mount thread (“HUB” pattern), opening compatibility with many modern rifle and pistol-caliber suppressors and mount ecosystems—while your barrel stays 9/16×24. Key Benefits Precise alignment: EA’s tight tolerances and titanium construction help maintain bore concentricity, reducing the risk of baffle strikes and minimizing POI shift. Direct-thread simplicity: Fewer moving parts than quick-attach systems for a lighter, low-profile interface and repeatable zero. Material advantage: Titanium resists heat and corrosion, keeping threads crisp and serviceable after high-round-count range days. Durable finish: Black Cerakote® protects against carbon, solvents, weather, and general handling. HUB flexibility: Use the 1.375×24 interface to pair with an expansive field of contemporary suppressors and compatible accessories. Feature Highlights Barrel Threads (muzzle side): 9/16×24 (RH) Suppressor Threads (rear): 1.375×24 (HUB pattern) Body Material: Titanium (lightweight, high strength) Finish: Black Cerakote® Profile: Compact, direct-thread format to keep OAL and weight down Model / SKU: EA23 UPC: 853406008237 Always confirm your barrel’s actual thread pitch (9/16×24 vs 1/2×28, 5/8×24, etc.) before installation. Ideal Use Cases Precision and varmint rigs: Direct-thread repeatability for consistent dope and minimal shift between on/off cycles. Suppressed carbine builds: Lightweight adapter that won’t throw off balance or add bulk at the muzzle. Caliber-flexible setups: Leverage HUB-pattern versatility across multiple hosts and cans with matching adapters. Installation & Setup (Quick Start) Verify thread pitches on both barrel and suppressor/mount (9/16×24 ↔ 1.375×24). Degrease mating threads; inspect for burrs or carbon. Hand-start the adapter on the barrel to avoid cross-threading; snug to spec. Mount the suppressor to the adapter per the suppressor manufacturer’s torque and thread-locker guidance (many users prefer a high-temp, non-permanent thread locker like Rocksett® where appropriate). Bore check: With the bolt removed, visually confirm full, unobstructed bore line through the adapter and suppressor. Re-verify zero and inspect after your first heat cycle; re-torque if required. Pro tip: Witness-mark the adapter and barrel shoulder with a silver pencil to spot any movement during early range sessions. Performance Notes You’ll Appreciate Repeatable return-to-zero: Direct-thread interfaces are prized for consistent on/off behavior on precision guns. Heat resilience: Titanium shrugging heat + Cerakote protection = cleaner threads after hard strings. Low added mass: Keep your rifle lively and reduce harmonic impact at the muzzle. Compatibility Guidance Suppressors/Mounts: Works with 1.375×24 (HUB) threaded suppressors and compatible modular mounts. Hosts: Barrels cut 9/16×24. Common on certain 9mm/.350/.40-cal and specialty builds; verify your exact platform. Shoulder geometry: For best results, use a square, full-diameter shoulder or a precision timing/collar system as required by your barrel profile. Care & Maintenance After shooting: Allow to cool; remove carbon with a nylon/bronze brush and a carbon-safe solvent. Thread care: Keep threads lightly oiled when stored; avoid galling by starting threads clean and by hand. Periodic checks: Inspect for carbon locking, thread wear, or impact marks; service before the next range day. Responsible Use & Legal Follow all laws: Suppressors and components may be regulated. Ensure compliance with federal, state, and local laws (NFA where applicable). Safety first: Confirm bore alignment every time you change mounts, adapters, or muzzle devices. Professional help: If you’re unsure about thread spec or shoulder trueness, consult a qualified gunsmith. Specifications (At-a-Glance) Product: Energetic Armament Direct Thread Adapter Barrel Threads: 9/16×24 Suppressor Threads: 1.375×24 (HUB) Material: Titanium Finish: Black Cerakote® Model: EA23 UPC: 853406008237 SEO Highlights (Quick Scan) Energetic Armament 9/16×24 to 1.375×24 HUB direct thread adapter Titanium construction with black Cerakote finish Precision concentricity, reduced POI shift, direct-thread reliability Model EA23, UPC 853406008237 Suggested Meta Title Energetic Armament Direct Thread Adapter – 9/16×24 to 1.375×24 HUB, Titanium, Black Cerakote | EA23 | UPC 853406008237 Suggested Meta Description Add HUB-pattern suppressor flexibility with the Energetic Armament EA23. Titanium direct thread adapter converts 9/16×24 barrels to 1.375×24 in a compact, Cerakote-finished package. Model EA23, UPC 853406008237. The End