Energetic Armament Direct Thread Adapter – M14×1 LH (Barrel) to 1.375×24 (Suppressor/HUB) – Titanium – Black Cerakote® (EA26) – UPC 853406008268

Bridge European muzzle threads to the modern HUB ecosystem with confidence. The Energetic Armament Direct Thread Adapter (EA26) converts M14×1 left-hand barrel threads to the industry-standard 1.375×24 (“HUB”) suppressor interface, giving you access to a wide range of current modular suppressors and rear caps. Precision-machined from titanium and finished in Black Cerakote®, the EA26 prioritizes concentricity, durability, and minimal added weight—ideal for hunters, precision shooters, and enthusiasts who prefer the repeatable zero of a direct-thread mount.

Why 1.375×24 (HUB)? It’s the most widely adopted universal suppressor thread, enabling cross-compatibility among many leading cans and mounting systems while your host retains its original M14×1 LH muzzle.

Key Benefits

• Concentric alignment you can trust: Tight tolerances and titanium rigidity help maintain bore concentricity, reducing the risk of baffle strikes and minimizing POI shift.

• Direct-thread consistency: Fewer moving parts than QD systems for a lighter, low-profile interface and repeatable return-to-zero.

• Titanium advantage: Excellent strength-to-weight, heat resistance, and corrosion resistance keep threads crisp after hard use.

• Protective finish: Black Cerakote® shields against carbon, solvents, and abrasion for long service life.

• HUB flexibility: Pair your M14×1 LH host with an expansive field of 1.375×24 suppressors and modular mounts.

Feature Highlights

• Barrel/Muzzle Threads (male): M14×1 LH

• Suppressor Threads (female): 1.375×24 (HUB pattern)

• Material: Titanium (lightweight, high strength)

• Finish: Black Cerakote®

• Profile: Compact, weight-conscious design to keep OAL and front-end mass down

• Model / SKU: EA26

• UPC: 853406008268

Verify your barrel is M14×1 LH (not 1/2×28, 5/8×24, or M15×1) before ordering. European rifles commonly use M14×1 LH, but model variations exist.

Ideal Use Cases

• European-threaded hunting rifles: Add modern suppressor options without re-threading your barrel.

• Precision rigs: Direct-thread repeatability that long-range shooters value for stable dope and cold-bore confidence.

• Carbines with metric threads: Lightweight adapter keeps handling lively while unlocking HUB compatibility.

Installation (Quick Start)

1. Confirm threads: Barrel M14×1 LH ↔ suppressor/mount 1.375×24 (HUB).

2. Clean & inspect: Degrease threads and shoulder; remove carbon and old thread locker.

3. Hand-start only: Begin threading by hand to avoid cross-threading; snug to spec against a true, square shoulder.

4. Mount suppressor: Follow the suppressor maker’s torque and thread-locker guidance (many recommend high-temp, non-permanent options like Rocksett®).

5. Bore check: With bolt removed, visually confirm a clear, centered bore line through adapter and suppressor.

6. Range verify: Fire a short string; re-check torque and witness marks after the first heat cycle.

Pro Tip: Add a small witness mark across the adapter and barrel shoulder to catch any rotation early.

Performance You’ll Notice

• Stable zero on/off: Direct-thread mounts excel at repeatability across removal/installation cycles.

• Minimal weight penalty: Titanium keeps the nose light to preserve balance and harmonics.

• Heat & weather resilience: Cerakote + titanium resist baked-on carbon and corrosion.

Compatibility Guidance

• Suppressors/Rear Caps: Works with 1.375×24 (HUB) threaded suppressors and modular systems from many manufacturers.

• Hosts: Barrels cut M14×1 left-hand, common on select European sporting and precision rifles.

• Shoulder geometry: A true, square shoulder is essential for alignment; use compatible shims/collars only when appropriate.

Care & Maintenance

• After shooting: Let cool, then brush threads with nylon/bronze and use a carbon-safe solvent.

• Prevent galling: Start threads clean and by hand; keep a light oil film for storage.

• Periodic checks: Inspect for nicks, carbon locking, or unusual wear before next use.

Responsible Use & Legal

• Know the law: Suppressors and related parts are regulated. Ensure compliance with federal, state, and local laws (NFA where applicable).

• Safety first: Re-confirm bore alignment any time you change adapters, mounts, or muzzle devices.

• Gunsmithing help: If unsure about your thread spec or shoulder trueness, consult a qualified gunsmith.

Specifications (At-a-Glance)

• Product: Energetic Armament Direct Thread Adapter

• Barrel Threads: M14×1 LH (male)

• Suppressor Threads: 1.375×24 HUB (female)

• Material: Titanium

• Finish: Black Cerakote®

• Model: EA26

• UPC: 853406008268

SEO Highlights (Quick Scan)

• Energetic Armament M14×1 LH to 1.375×24 HUB direct-thread adapter

• Titanium construction with Black Cerakote finish

• Precision concentricity, reduced POI shift, repeatable zero

• Model EA26, UPC 853406008268

Suggested Meta Title

Energetic Armament Direct Thread Adapter – M14×1 LH to 1.375×24 HUB, Titanium, Black Cerakote | EA26 | UPC 853406008268

Suggested Meta Description

Connect European M14×1 LH barrels to HUB-pattern suppressors with the Energetic Armament EA26. Titanium, Black Cerakote direct-thread adapter ensures alignment and repeatable zero. Model EA26, UPC 853406008268.

The End