Fierce Firearms 7mm, 24" — AR-15 Compatible Barrel | Part # 2841824 | UPC 853418284841

Max out velocity and long-range consistency on your AR platform. The Fierce Firearms 7mm, 24" AR-15 barrel (2841824) taps into the superb .284-caliber ballistic profile—pairing sleek, high-BC 7mm bullets with a 24-inch tube for exceptional downrange speed, flatter trajectories, and tighter wind drift. Purpose-built for precision and reliable cycling on standard AR-15 receivers, this barrel is the cornerstone of a do-it-all AR that stretches from coyote country to weekend steel.

Part / SKU: 2841824
UPC: 853418284841
Platform: AR-15 (standard AR-15 upper receiver interface)
Caliber Bore: 7mm (.284") — confirm exact chambering before purchasing ammo/bolt/mags
Barrel Length: 24 inches

Why Choose the Fierce 7mm 24" AR-15 Barrel

• Longer tube, more speed: The 24" length extracts maximum velocity from modern 7mm cartridges, yielding flatter DOPE and more forgiving holds at distance.

• Wind-bucking bullets: 7mm projectiles offer excellent BC, holding velocity and energy farther downrange than typical small-cal AR rounds.

• Precision-first machining: Concentric chambering, clean lands, and a true crown support sub-MOA potential with tuned handloads or premium factory ammo.

• Threaded muzzle: Ready for a brake or suppressor (where legal) to control recoil and spot impacts. Typical pitch is 5/8x24—verify for this SKU.

• AR-friendly integration: Designed for AR-15 receiver geometry to simplify your build while expanding its reach.

Key Features at a Glance

• Length: 24 inches for top-end velocity and stable ballistics

• Muzzle: Threaded for brakes/suppressors (verify pitch; 5/8x24 is common for 7mm)

• Gas System: AR-15 pattern (often rifle-length or extended for 24"; confirm for your build)

• Extension: AR-15 barrel extension; M4 feed ramps typical (verify)

• Twist Rate: Fast twist to stabilize long-for-caliber 7mm bullets (confirm exact twist)

• Material/Finish: Precision rifle-grade steel with protective finish (nitrided/stainless/Cerakote may vary by production; verify current spec)

• Part #: 2841824 | UPC: 853418284841

Compatibility Checklist: Confirm chamber, bolt face, magazine type, gas system length, muzzle thread, and twist rate. Some 7mm AR cartridges need specific bolts (e.g., Grendel- or x39-pattern) and dedicated magazines.

Real-World Performance Benefits

• Flatter trajectory & lighter wind calls: Higher muzzle velocity and slick 7mm bullets keep your holds tight and predictable past 300–700 yards.

• Cleaner recoil impulse: With gas tuned and a brake or can installed, track your reticle through recoil and spot impacts for faster corrections.

• Cold-bore confidence: True crown and concentric chambering promote reliable first-round POI—critical for hunting and practical steel.

Ideal Use Cases

• Predator & varmint hunting: Reach across pastures and coulees with ethical, repeatable accuracy and quick follow-ups.

• Practical steel / PRS-style practice: Learn wind and positional shooting on a familiar AR-15 platform that’s cheaper to feed than many bolt guns.

• Extended-range coyote rigs: Pair 7mm efficiency with AR ergonomics for a rock-solid calling rifle that handles all-day field work.

Smart Build & Tuning Tips

• Bolt & magazines: Match these to your specific 7mm chamber (for example, a Grendel-based case needs a Grendel bolt face and compatible mags).

• Gas tuning: A rifle-length (or longer) gas system often pairs best with 24". Consider an adjustable gas block to optimize recoil and reliability with and without a suppressor.

• Muzzle device: Time a brake with shims for recoil control; for suppressors (where legal), verify thread pitch and bore alignment before live fire.

• Optic pairing: A 3–15x, 4–16x, or 2–10x with a usable holdover reticle and zero stop complements the barrel’s reach without excessive weight.

• Ammo/load selection: Long, high-BC .284 bullets shine in fast twists. Chronograph and validate your DOPE at real distances.

Installation (Quick Guide)

1. Unload & clear the firearm.

2. Secure the upper in a proper vise block; remove any existing barrel.

3. Install the 2841824 barrel with the correct barrel nut; torque to spec and confirm alignment.

4. Fit gas system (length per barrel spec) and verify gas port alignment.

5. Time muzzle device to spec; confirm thread pitch and use proper shims/torque.

6. Headspace check with GO/NO-GO gauges for your chamber and bolt.

7. Function test and verify lock-back and ejection at the range; tune gas as needed.

If barrel installs are new for you, a qualified armorer can ensure correct torque, gas alignment, and headspace.

Care & Maintenance

• Break-in & cleaning: Follow Fierce/armorer guidance; use a bore guide and caliber-correct tools—avoid aggressive abrasives.

• Thread care: Keep muzzle threads clean; use anti-seize if recommended for your device.

• Record keeping: Track round count, ammunition lots, MV/ES/SD, and cold-bore POI to maintain consistency through the season.

Specifications (Quick Reference)

• Brand: Fierce Firearms

• Product: 7mm AR-15 Compatible Barrel

• Length: 24"

• Platform: AR-15

• Part Number: 2841824

• UPC: 853418284841

• Chamber / Twist / Gas Length / Thread: Verify for this SKU

• Finish: Protective finish (varies by lot)

Frequently Asked Questions

Q: What exact 7mm chamber is this barrel?
A: Confirm the chambering for part 2841824. Chamber determines bolt face, mags, and ammo (e.g., Grendel-based vs. proprietary).

Q: What’s the muzzle thread pitch?
A: Most 7mm/.30-cal AR barrels are 5/8x24, but verify before purchasing a brake or suppressor mount.

Q: Which twist rate do I need?
A: Fast twists stabilize long, high-BC .284 bullets. Confirm the exact twist for your preferred bullet weights.

Q: Gas system length?
A: Many 24" AR barrels run rifle-length or longer gas. Verify and pair with the correct gas tube and buffer.

Q: Will it fit a standard AR-15 upper?
A: Yes—the barrel uses an AR-15 barrel extension. Ensure your bolt, mags, and gas/buffer match the 7mm cartridge you select.

SEO-Friendly Highlights (Naturally Woven)

Fierce Firearms 7mm 24" AR-15 barrel, high-BC .284 performance, threaded muzzle for brake/suppressor, rifle-length/extended gas (verify), precision-machined for sub-MOA potential, part 2841824, UPC 853418284841; confirm chamber, twist, thread pitch, bolt/mag compatibility.

Meta for Your Product Page

Meta Title: Fierce Firearms 7mm, 24" AR-15 Barrel — Threaded | Part 2841824
Meta Description: Push your AR’s range with the Fierce Firearms 7mm, 24" barrel. AR-15 compatible, threaded muzzle, precision-machined for wind-bucking performance and reliable cycling. Part 2841824 — UPC 853418284841. Verify chamber, gas length, twist, and thread pitch.

From windy pastures to long steel, the Fierce Firearms 7mm, 24" AR-15 barrel delivers the velocity, stability, and confidence to make first-round hits—near or far.

The End