Frankford Arsenal Quick-N-EZ Case Tumbler Kit — Complete Vibratory Brass Cleaning System (Model 645880 | UPC 661120458807)
Shine up your brass and speed up your reloading workflow. The Frankford Arsenal Quick-N-EZ Case Tumbler Kit (645880) is an all-in-one vibratory case-cleaning system that delivers bright, uniform results with minimal effort. Ideal for new reloaders and high-volume shooters alike, this convenient kit bundles the essentials—vibratory tumbler, cleaning media, polish, and media separation—so you can go from dirty pickup brass to press-ready cases fast.
Why Reloaders Choose the Quick-N-EZ Case Tumbler Kit
Complete Out-of-the-Box Solution: Everything you need to start cleaning brass—no guesswork or extra shopping trips.
Fast, Even Cleaning: The powerful vibratory bowl circulates media around the cases for consistent carbon removal on the outside and in the case mouth.
Low Effort, High Throughput: Process hundreds of pistol cases or large batches of .223/5.56 at a time (capacity varies with caliber and media).
Media & Polish Included: Optimized dry media (typically corn cob or walnut) plus polish brings cases to a bright, uniform finish.
Clean Separation: A media separator (or sifter) lets you quickly remove media from finished brass—no mess on the bench.
Budget-Friendly Upgrade: Get professional-looking brass without the price or complexity of wet tumbling and pin separation.
What’s in the Box*
Quick-N-EZ Vibratory Tumbler (AC powered)
Dry Cleaning Media (pre-measured for the bowl)
Brass Polish/Conditioner (to boost shine and reduce dust)
Media Separator/Sifter (for quick, clean separation)
*Exact contents and quantities can vary by package or retailer; verify the included items with your seller.
Key Features & Specs (At a Glance)
Model: 645880
UPC: 661120458807
Method: Dry vibratory tumbling
Media Compatibility: Corn cob or walnut (included media type varies by kit)
Bowl Capacity: High-volume bench-top bowl sized for common pistol and rifle brass (actual case capacity varies by caliber and media)
Controls: Simple on/off operation for set-and-forget cleaning cycles
Construction: Durable motor, stable base, and impact-resistant bowl for long service life
Best For: High-volume pistol shooters, .223/5.56, .308 Win, and general-purpose brass maintenance
How to Use (Quick Start)
Fill the Bowl: Add the included dry media to the marked level inside the bowl.
Charge with Polish: Drizzle a small amount of case polish, run the tumbler for 1–2 minutes to distribute.
Add Brass: Pour in deprimed or spent brass (sorting by caliber recommended for best results).
Tumble: Run 30–120 minutes depending on soil level and finish desired.
Separate Media: Pour contents into the media separator, rotate/shake until cases are free of media.
Load & Store: Return media to the bowl with the lid on to keep dust down; your brass is press-ready.
Pro Tips for Better Results
Deprime First: Cleaner primer pockets and less trapped residue.
Use the Right Media: Corn cob for high shine; walnut for heavy carbon and range grit.
Don’t Overfill: Leave space for media and brass to move freely—more motion equals faster cleaning.
Refresh Media: If tumbling takes longer than usual or dust increases, replace or recharge media and add a touch of polish.
Dust Management: A used dryer sheet cut into strips can help capture dust and debris during the cycle.
Safety First: Wear a mask/gloves when handling dirty media; lead residue can be present.
Ideal Use Cases
Match Prep & Volume Shooting: Turn buckets of pickup brass into uniform, reliable cases before resizing.
General Maintenance: Keep hunting and training brass clean and consistent to reduce die wear.
New Reloader Starter Kit: Everything in one box, with a gentle learning curve and proven results.
Frequently Asked Questions
How many cases can the bowl hold?
Capacity depends on caliber and media. As a rule, fill to no more than ~2/3 full so brass and media can circulate properly.
How long should I tumble?
Most batches clean up in 30–90 minutes. Very dirty range brass can take up to 2 hours. Check periodically until you like the finish.
Will this clean primer pockets?
Dry tumbling improves primer pocket appearance but won’t scrub them as aggressively as wet pins. Depriming before tumbling helps, and you can follow up with a pocket tool if you need match-grade cleanliness.
Do I need to wash the brass afterward?
No rinse is needed for dry tumbling. Just ensure all media is removed before loading; a light compressed-air blow-off helps.
Corn cob or walnut?
Walnut cuts heavy fouling faster; corn cob produces a brighter finish. Many reloaders mix or rotate media types.
Maintenance & Care
Keep It Covered: Use the lid and store media in the bowl to reduce dust.
Check Hardware: Periodically inspect the bowl, lid, and motor mounts for tightness.
Refresh Media: Replace media when it darkens, becomes dusty, or cleaning slows.
Bench Hygiene: Vacuum or wipe the bench after separation to keep lead-bearing dust under control.
SEO Highlights (Naturally Integrated)
Frankford Arsenal Quick-N-EZ Case Tumbler Kit, vibratory brass tumbler, dry media case cleaner, media separator, brass polish, reloading tumbler for 9mm, .223/5.56, .308, fast carbon removal, Model 645880, UPC 661120458807.
Safety & Compliance
Always follow the manufacturer’s instructions. Handle dirty brass and spent media with gloves and eye protection; dispose of lead-bearing dust responsibly. Keep the tumbler on a stable, ventilated surface, away from children and pets.
Frankford Arsenal Quick-N-EZ Case Tumbler Kit (645880): simple, affordable, and effective—bright, clean brass in a single, easy step.
The End
