Galco Horizontal Shoulder System Tie-Down Set 2.0 — Tan | Full-Grain Leather | Ambidextrous | Model MC2TD | UPC 601299026278
Lock in comfort, stability, and professional polish for your shoulder rig. The Galco Horizontal Shoulder System Tie-Down Set 2.0 (MC2TD) adds a premium full-grain leather tie-down for both the holster side and the magazine/ammunition side of your harness—keeping gear from shifting, printing, or riding up under cover garments. Finished in classic Tan and built to Galco’s exacting standards, this ambidextrous kit fine-tunes your Miami Classic 2.0 and other compatible Galco horizontal shoulder systems for all-day concealed comfort and a cleaner draw stroke.
Brand: Galco
Product: Horizontal Shoulder System Tie-Down Set 2.0
Color: Tan
Material: Full-grain leather with premium hardware
Handedness: Ambidextrous (works for right- or left-hand shoulder setups)
Use: Stabilizes holster and off-side magazine/ammunition carrier to belt
Model/SKU: MC2TD
UPC: 601299026278
Why Add the Tie-Down Set to Your Shoulder Rig?
Rock-Solid Stability
Tie-downs anchor the holster and magazine side to your belt, reducing sway, bounce, and printing when walking, sitting, or driving. Your rig stays where you set it—so your draw stroke stays consistent.
Cleaner, Faster Draw
By preventing the holster from riding up, the tie-down helps maintain the correct holster height and angle for a smoother, more repeatable presentation.
All-Day Comfort
Less shifting means less pressure on your neck and shoulders. The weight distributes more evenly, especially with heavier pistols or extended magazines.
Premium Full-Grain Leather
Crafted from select steerhide that breaks in beautifully and lasts for years. The Tan finish pairs perfectly with Galco’s classic shoulder rigs for a cohesive, professional look.
Ambidextrous Setup
Designed for right- or left-handed users—configure your tie-downs to match your carry side and off-side accessory carrier.
Compatibility
Optimized for the Galco Miami Classic 2.0 horizontal shoulder system.
Works with select Galco horizontal shoulder harnesses using the Miami Classic 2.0 style attachment points.
Note: Not all legacy or vertical rigs share the same attachment geometry. Verify your harness model before purchase.
What’s Included
Two (2) tie-down straps: one for the holster side, one for the off-side carrier (magazine, speedloader, shell carrier, or accessory pouch—depending on your rig).
Premium hardware and pre-set attachment points for quick, secure installation.
Quick Installation Guide
Unload & Clear: Ensure your firearm and magazines are safely unloaded.
Attach to Harness: Clip or loop the tie-down to the lower strap of the holster and the lower strap of the magazine/ammunition carrier (per your harness layout).
Belt Attachment: Anchor each tie-down to your belt at natural hang points.
Fine-Tune Length: Adjust for minimal slack so components won’t ride up during the draw, but leave enough freedom for natural movement.
Test & Refine: Practice a few draws under your cover garment; make small adjustments until your draw stroke and reholster feel seamless.
Carry Scenarios Where Tie-Downs Shine
Driving / Seated Carry: Prevent gear from creeping upward in vehicles or at the desk.
Active Days: Walking, bending, or climbing? Keep the rig locked in.
Heavier Pistols & Extended Mags: Reduce harness shift and neck fatigue.
Concealed Workwear: Maintain a consistent profile beneath suit jackets, sport coats, or overshirts.
Care & Maintenance
Wipe Clean: Use a dry or slightly damp cloth to remove sweat and dust.
Condition Sparingly: Apply a leather conditioner recommended by Galco when the leather feels dry—avoid over-treating.
Hardware Check: Inspect snaps and attachment points periodically and tighten as needed.
Key Features at a Glance
Full-grain leather tie-downs in Tan
Ambidextrous configuration (right or left carry)
Stabilizes both holster and off-side carrier to your belt
Improves draw consistency and reduces printing
Compatible with Miami Classic 2.0 and select Galco horizontal rigs
Model/SKU: MC2TD | UPC: 601299026278
FAQ
Q: Will MC2TD fit my older Galco Miami Classic?
A: It’s tailored for the Miami Classic 2.0 attachment pattern. Some earlier/other models may differ—check your harness for compatibility.
Q: Are both sides included?
A: Yes—this 2-piece set includes tie-downs for holster side and off-side.
Q: Can I use it with a vertical shoulder holster?
A: This model is designed around horizontal shoulder systems. For vertical rigs, consult Galco’s model-specific tie-downs.
Q: Does color match my Galco Tan rig?
A: The finish is classic Galco Tan and is designed to complement Tan Galco harnesses. Natural leather variations are expected.
SEO Highlights (Naturally Woven)
Galco Horizontal Shoulder System Tie-Down Set 2.0, MC2TD, Tan full-grain leather, ambidextrous tie-downs for Miami Classic 2.0, stabilizes holster and mag carrier, reduces printing, improves draw consistency, UPC 601299026278.
Meta for Your Product Page
Meta Title: Galco Tie-Down Set 2.0 — Tan, Full-Grain Leather, Ambidextrous | MC2TD
Meta Description: Stabilize your Galco Miami Classic 2.0 with the Galco Horizontal Shoulder System Tie-Down Set 2.0. Tan full-grain leather, ambidextrous, two-piece set for holster and off-side carrier. SKU MC2TD — UPC 601299026278.
Finish your shoulder rig the right way—secure, comfortable, and ready—with the Galco Horizontal Shoulder System Tie-Down Set 2.0 (MC2TD).
The End
