Geissele Automatics Super Precision® 30mm Scope Mount — For Vortex 1–6× Scopes, Black, Anodized

Model/MPN: 05-329B (alt. code 05329B) • UPC: 817953022061

Lock in your zero and maximize optical performance with the Geissele Automatics Super Precision® 30mm Mount designed specifically to fit Vortex 1–6× scopes. Machined from a single billet of high-strength aluminum and finished in a durable black anodize, this mount delivers the rigidity, alignment, and repeatability demanded by professional end users, competitors, and serious hunters. Geissele’s precision clamping and extended contact area spread the load across more rail surface, helping the mount stay put through recoil, temperature swings, and heavy field use.

Why Choose the Geissele Super Precision for Your Vortex 1–6×

• True One-Piece Precision: CNC-machined from a single billet for perfect ring concentricity and exceptional return-to-zero.

• Optimized for Vortex 1–6×: Ring spacing and height engineered around popular Vortex 1–6× LPVO footprints for proper eye relief and ergonomic head position.

• Superior Rail Interface: Geissele’s shear-lug and wide-footprint clamping system increases surface engagement on Picatinny rails to resist shift under recoil.

• Anodized Armor: Mil-spec black anodized finish resists scratches, solvents, and harsh environments while keeping glare to a minimum.

• Alignment Out of the Box: Precisely bored rings reduce the need for lapping, protecting your optic tube and simplifying install.

• Field-Proven Durability: Trusted by professionals where hard use is a given—rigid under sling pressure, barricade loads, and rough rides.

Note: This model is built to 30mm tube optics (e.g., Vortex 1–6× with 30mm main tube). Confirm your scope tube diameter before ordering.

Performance You Can See

The Super Precision’s one-piece body and carefully controlled tolerances help maintain mechanical alignment between your bore and reticle, which translates to more predictable tracking when dialing and more consistent impacts when holding for wind. Combined with a Vortex 1–6× LPVO, you get rapid 1× target acquisition up close and crisp 6× identification at distance—without chasing zero after a rough day at the range or on the mountain.

Key Features & Specifications (At a Glance)

• Brand/Series: Geissele Automatics — Super Precision®

• Application: 30mm scope tubes; fits Vortex 1–6× scopes

• Material: Precision billet aluminum (one-piece body)

• Finish: Black hardcoat anodized

• Rail Interface: 1913 Picatinny compatible with Geissele multi-point clamping and integral recoil lug(s)

• Torque Guidance: Ring caps and cross bolts torque to manufacturer spec (see install notes)

• Return-to-Zero: Designed for repeatable zero when reinstalled on the same rail position under proper torque

• Part Numbers: 05-329B (aka 05329B)

• UPC: 817953022061

Exact mount height/offset varies by model family; this variant is purpose-built for Vortex 1–6×. Verify clearance with your backup sights and rifle setup.

Compatibility & Use Cases

• Rifles: AR-pattern and other platforms with 1913 Picatinny top rails.

• Optics: Vortex 1–6× LPVO models with 30mm main tubes (e.g., Strike Eagle 1–6×, Viper PST Gen II 1–6×, as applicable).

• Scenarios: 3-Gun/USPSA, patrol/duty carbines, predator/varmint rigs, and general-purpose hunting where speed + precision both matter.

Installation Tips (Pro Workflow)

1. Degrease & Prep: Clean rail slots, cross bolts, and ring screws with isopropyl alcohol.

2. Index & Seat: Place mount on the desired rail position; push forward into the rail slot to seat the recoil lug(s).

3. Torque the Base: Tighten cross bolts to Geissele-specified torque (commonly 60–65 in-lb, check the included instructions).

4. Set the Scope: Level the rifle and optic; lightly snug ring caps.

5. Level & Eye Relief: At max magnification, fine-tune eye relief and reticle level; then torque ring screws evenly in an X-pattern (often 15–20 in-lb—verify Geissele’s spec).

6. Witness Mark: Paint-pen hardware so you can spot any movement at a glance.

Use a quality inch-pound torque wrench. Over-torqueing can crush tubes; under-torqueing can allow shift.

Frequently Asked Questions

Will this mount work with a 34mm tube?
No. This model is 30mm only. Choose a Geissele Super Precision® 34mm variant for 34mm optics.

Does it co-witness with irons?
LPVOs generally do not co-witness like red dots. Verify height if you run offset iron sights; many shooters use 45° offsets.

Is lapping required?
Geissele rings are precisely aligned; lapping is typically unnecessary and not recommended unless measuring indicates an issue.

Can I swap it between rifles and keep zero?
Return-to-zero is excellent when reinstalled in the same rail slot with the same torque, but minor re-zero may be needed due to rail variances between rifles.

Does it include thread locker?
Use a medium-strength thread locker per Geissele’s guidance on ring screws (avoid on cross bolts unless specified).

SEO Highlights (Naturally Integrated)

Geissele Automatics Super Precision 30mm scope mount; fits Vortex 1–6× LPVO scopes; black anodized one-piece billet mount; Picatinny multi-point clamp; return-to-zero precision mount for AR-15/AR-10; high-strength anodized finish; MPN 05-329B / 05329B; UPC 817953022061.

Best Practices & Safety

Confirm your optic’s 30mm tube, verify rail alignment, and follow manufacturer torque specs. After your first range session, re-check torque and witness marks. Always practice safe firearm handling.

Geissele Super Precision® 30mm Mount for Vortex 1–6× — elite rigidity, repeatable zero, and a sleek black anodized finish to help your LPVO perform at its peak.

The End