Geissele Automatics Super Precision, Mount, 34mm, Black Color, Anodized Finish 05-417B 05417B

Geissele Automatics Super Precision® Scope Mount — 34mm, Black, Anodized (05-417B / 05417B | UPC 817953020203) Lock your glass like your data depends on it. The Geissele Automatics Super Precision® 34mm Scope Mount in black anodized finish delivers a rock-solid, repeatable interface for premium 34mm optics. Machined from a single billet for uncompromising rigidity, this mount is purpose-built for recce rifles, SPRs, precision gas guns, and hard-use carbines where tracking, zero retention, and turret repeatability are non-negotiable. Why Choose the Super Precision 34mm Monolithic Strength: Precision-machined from a single billet for maximum torsional rigidity and consistent ring alignment—no shift under recoil, temperature, or time. Geissele Shear-Lok™ Cross-Bolts: Oversize, precision ground interface resists fore/aft movement on MIL-STD-1913 Picatinny rails, protecting your zero during transport and hard use. True 34mm Rings: Optimized clamping surface distributes force evenly around your optic tube to prevent marring and maintain concentricity—critical for long-range consistency. Perfect Return-to-Zero: Designed for repeatable removal/reinstall when you need to swap optics or access receiver internals without chasing your dope. Hardcoat Anodized Black: Durable, low-glare finish stands up to field abrasion, weather, and constant handling. Optimized Height/Clearance: Purpose-built for modern LPVOs and high-magnification optics with room for caps and ocular housings, while promoting a comfortable, heads-up shooting posture. Precision Hardware: Premium fasteners, engineered torque values, and ring geometry ensure a secure install with no guesswork. Built for Modern Optics & Real Conditions Pairing a 34mm tube with premium glass means you’re running serious elevation travel and dialing often. The Super Precision® mount keeps tracking linear by maintaining optic alignment and resisting flex. Whether you’re braced on a barricade, riding a tripod, or prone in wind, this mount prevents micro-shift that steals hits at distance. Ideal Applications AR-10 / AR-15 Precision Builds: SPR, DMR, Recce, and gas-gun PRS setups. LPVOs & 3-18x / 4-16x / 5-25x Scopes: Especially optics that demand robust clamping and perfect alignment. Duty / Competition / Training: From patrol rifles to 2-Gun/3-Gun to field matches and NRL-style gas-gun events. Key Features & Specifications (At a Glance) Model: Geissele Super Precision® 34mm Scope Mount Tube Size: 34mm Color/Finish: Black, hardcoat anodized Material: Precision-machined aluminum (single-piece construction) Rail Interface: MIL-STD-1913 Picatinny Retention: Geissele Shear-Lok™ cross-bolts with premium fasteners Torque Guidance: Marked fastener torque (follow included instructions for ring/base values) Part Numbers: 05-417B / 05417B UPC: 817953020203 Note: Specific mount height/offset variants may exist under the same family. Confirm eye relief, cantilever, and height specs for your optic and rifle before purchase. Installation & Setup Tips Degrease Interfaces: Clean the upper receiver rail and mount surfaces; ensure no oil under the rings. Set Eye Relief & Level: With the rifle shouldered in your shooting position, set eye relief at max magnification; level the reticle relative to the bore. Torque Correctly: Use a calibrated torque driver. Follow Geissele’s base and ring torque values—do not over-tighten. Tighten ring caps in an “X” pattern and verify even gaps. Witness Mark: Paint or pencil witness marks on screws after final torque to monitor any movement. Confirm Zero: Zero at your chosen distance and conduct a box test (dial up/right/down/left) to confirm tracking and return-to-zero. Real-World Advantages You’ll Notice Repeatable POI: No mystery drift between range days—your dope remains valid. Cleaner Turret Data: Stable optical alignment means your ballistic solver matches actual impacts. Confidence Under Recoil: Mount rigidity prevents tube stress and scope wander during long strings or heavy calibers. Professional Fit & Finish: The black hardcoat looks as good as it performs on duty rifles and match builds. Pairing Suggestions Top-Tier Optics: 34mm LPVOs (1-10x) and mid/high-mag scopes (3-18x, 4-16x, 5-25x). Quality Tools: A Wheeler/Fix It Sticks torque kit and bubble or digital levels for a square install. Accessories: Low-profile offset red dot mount on the handguard or top rail (if desired), and a rigid bipod/tripod for zero confirmation. Frequently Asked Questions Q: Will this fit my Picatinny rail? A: Yes. It’s engineered for MIL-STD-1913 Picatinny rails commonly found on AR receivers and many precision chassis. Q: Is lapping required? A: No. Geissele’s machining and ring alignment are designed to eliminate the need for lapping when installed per instructions. Q: Can I remove and reinstall without losing zero? A: The mount is designed for excellent return-to-zero when reinstalled in the same rail location and torqued properly. Q: What height is it? A: Geissele offers several heights/offsets within the Super Precision family. Verify the exact height of 05-417B / 05417B against your optic and cheek weld needs. SEO Highlights (Naturally Integrated) Geissele Super Precision 34mm scope mount, black anodized one-piece mount, 05-417B / 05417B, UPC 817953020203, Picatinny rifle scope mount, Shear-Lok™ cross-bolts, return-to-zero cantilever mount, AR-15/AR-10 precision optic mount, 34mm LPVO mount, durable hardcoat anodized finish. The Bottom Line The Geissele Automatics Super Precision® 34mm Mount is the “buy once, cry once” solution for shooters who demand zero movement, zero excuses. With monolithic strength, precise geometry, and a duty-ready anodized finish, it secures your glass and your confidence—shot after shot, season after season. The End