Glock Factory Magazine Catch — Reversible | Fits Gen4 G21, G20, G29, G30, G41 | Bulk OEM Part #8795

OEM Reliability for Your Gen4 Large-Frame Glock

Restore crisp, positive magazine releases with the Glock Factory Magazine Catch (Reversible) for Gen4 large-frame pistols. This genuine OEM part—bulk-packed as Part #8795—delivers factory-fit engagement and consistent lockup across popular .45 ACP and 10mm models: G21, G20, G29, G30, and G41. Whether you’re replacing a worn catch, converting to a left-hand release, or building out an armorer’s spares kit, this reversible design preserves Glock’s proven reliability while letting you configure the mag button to your dominant side.

Compatibility (Gen4 only): G21 • G20 • G29 • G30 • G41
Part Number: 8795 • Package: Bulk OEM (no retail card)

Why Choose a Genuine Glock Magazine Catch?

Factory-Spec Materials & Geometry

Glock-engineered tolerances ensure reliable magazine retention and drop-free releases with Glock OEM mags, preserving the feel and timing you expect from a duty-ready pistol.

Reversible for Left- or Right-Handed Shooters

Switch the catch to the opposite side for left-hand use or support-hand manipulations—ideal for duty, training, and competition where speed and consistency matter.

Drop-In Maintenance & Armorer Friendly

Keep one in your range/armorer kit for field repairs, training guns, or high-round-count pistols. A fresh catch can resolve mushy releases or inconsistent magazine lockup.

Perfect Match for Gen4 Frames

This model is designed for Gen4 large-frame grip modules. Fit, function, and texture integrate seamlessly with OEM frames and backstraps.

Key Features at a Glance

• Genuine Glock OEM magazine catch (bulk)

• Reversible design for left/right configuration

• Positive lockup with Glock factory magazines

• Direct fit for Gen4: G21, G20, G29, G30, G41

• Part #8795 • Bulk packaging (no retail blister/card)

Not intended for Gen3, Gen5, or Slimline (G43/43X/48) frames. Always verify your generation and model before purchase.

Installation Overview (Quick Guide)

1. Unload & Verify Clear: Remove magazine; visually/physically check chamber.

2. Remove Backstrap (if installed): Allows access to the mag-catch spring channel.

3. Depress Mag-Catch Spring: Using a non-marring tool, compress the spring from the frame channel.

4. Slide Out Catch: Withdraw the old catch; note spring orientation.

5. Install New Catch #8795: Insert the catch, reseat the spring into the catch notch, and confirm free movement.

6. Function Check: Insert an empty mag—verify positive lock and clean release from your chosen side.

If you’re not comfortable with armorer procedures, consult a certified Glock armorer or qualified gunsmith.

Who Is It For?

• Duty/Defense Users: Maintain OEM reliability with a fresh, factory-spec control.

• Left-Handed Shooters: Reverse the catch for natural, fast manipulations.

• High-Volume Trainers: Keep spares to minimize downtime during classes.

• Armorers & Ranges: Bulk OEM part is ideal for fleet maintenance.

Care & Best Practices

• Use OEM Magazines: Ensures consistent lockup and drop-free operation.

• Inspect the Spring: Replace the mag-catch spring if worn or bent.

• Test With All Mags: Verify lock and release with each magazine you carry.

• Recheck After Cleaning: Confirm smooth travel and proper engagement post-maintenance.

Frequently Asked Questions

Q: Will this fit my Gen3 or Gen5 Glock?
A: No. #8795 is Gen4-specific for large-frame models (G21/G20/G29/G30/G41).

Q: Does it include the spring?
A: Bulk kits may not include additional hardware. Check your order contents; replace the spring if worn.

Q: Can I swap sides easily?
A: Yes. The reversible design supports left- or right-hand configuration following standard Glock armorer steps.

Q: Will it work with aftermarket mags?
A: It’s optimized for Glock OEM magazines. Aftermarket fit can vary—always test before carry or competition.

SEO-Rich Highlights & Buyer Keywords

• Glock factory reversible magazine catch for Gen4

• Fits G21, G20, G29, G30, G41 large-frame models

• OEM part #8795, bulk packaging

• Left-hand/Right-hand configurable mag release

• Drop-in Glock replacement for reliable magazine lockup

Meta Title (SEO)

Glock Factory Magazine Catch — Reversible, Fits Gen4 G21/G20/G29/G30/G41 | OEM #8795 (Bulk)

Meta Description (SEO)

Upgrade or service your Glock with the factory-original reversible magazine catch for Gen4 G21, G20, G29, G30, G41. OEM Part #8795, bulk packaging. Left- or right-hand configuration, factory-spec reliability.

Structured Data (Product Schema JSON-LD)

json
Copy code
{
  "@context": "https://schema.org/",
  "@type": "Product",
  "name": "Glock Factory Magazine Catch — Reversible (Gen4 G21/G20/G29/G30/G41)",
  "sku": "8795",
  "brand": {
    "@type": "Brand",
    "name": "Glock"
  },
  "category": "Sporting Goods > Outdoor Recreation > Shooting > Gun Parts",
  "description": "Genuine Glock OEM reversible magazine catch for Gen4 large-frame pistols. Fits G21, G20, G29, G30, and G41. Bulk-packaged OEM part #8795 for factory-spec reliability and left/right configuration.",
  "additionalProperty": [
    { "@type": "PropertyValue", "name": "Generation", "value": "Gen4" },
    { "@type": "PropertyValue", "name": "Compatibility", "value": "G21, G20, G29, G30, G41" },
    { "@type": "PropertyValue", "name": "Orientation", "value": "Reversible (left/right)" },
    { "@type": "PropertyValue", "name": "Packaging", "value": "Bulk OEM" }
  ]
}

Responsible Use Reminder

Always unload and verify clear before service. After installation, perform a full function check with every magazine you depend on. Follow all local laws and Glock armorer guidelines for safe maintenance.

The End