Griffin Armament Suppressor Mount Thread Adapter 5/8"x24 Melonite QPQ Black 24MM5824A

Upgrade your 24mm-threaded AK into a modern suppressor-ready rifle with the Griffin Armament Suppressor Mount Thread Adapter 5/8"x24 – Melonite QPQ Black, 24MM5824A (UPC: 791154082256). Designed specifically for 24mm x 1.5mm AK front sight base threads, this premium adapter converts your barrel to the industry-standard 5/8x24 so you can run .30-cal muzzle brakes, flash hiders, and suppressor mounts without cutting or rethreading the barrel. Shooting Surplus+1 Convert 24x1.5mm AK Threads to 5/8x24 Many classic and modern AK variants use 24x1.5mm RH muzzle threads, which severely limits your muzzle device choices. The Griffin 24MM5824A fixes that instantly: Black Ankle Munitions+2Canoe Creek Armory+2 Barrel (input) thread: 24×1.5mm RH Muzzle (output) thread: 5/8×24 With 5/8x24 at the muzzle, you can now install: .30-cal muzzle brakes and compensators Flash hiders and hybrid devices Direct-thread suppressors and QD mounts that require 5/8x24 It’s a clean, reversible way to bring your 7.62×39 or 7.62/.30-cal AK into the same muzzle ecosystem as AR-10s and many precision rifles. Black Ankle Munitions+1 Precision Alignment: Muzzle-Face Index, Not “Rattle-Trap” Detents Griffin specifically built these as true suppressor-grade adapters, not cheap hardware-store bushings. Shooting Surplus+2Ready Gunner+2 Key alignment features: Raised surface indexes off the barrel’s muzzle face, not the front sight base Provides vastly improved theoretical alignment vs. detent-retained devices that can wobble or cant Designed for rifles with clean muzzle faces that are perpendicular to the bore for best results Shooting Surplus+2alpinerange.com+2 This geometry greatly reduces the risk of: Canted mounts Suppressor misalignment Baffle strikes caused by off-axis bore-to-can relationships Griffin strongly recommends 50 ft-lbs of torque and qualified gunsmith installation plus alignment checks before running a suppressor—especially on surplus rifles where factory tolerances can vary. Shooting Surplus+2alpinerange.com+2 Built Tough: 17-4 Stainless with Melonite QPQ Black Finish The 24MM5824A is made to live at the hottest, hardest-working part of your rifle: the muzzle. Material: 17-4 stainless steel – known for strength, hardness, and high-temperature durability Black Ankle Munitions+1 Finish: Melonite QPQ black – ultra-corrosion-resistant, very hard surface, and low-friction for extended service life Ammunition Depot+2Canoe Creek Armory+2 This combination stands up to: High round counts Sustained fire and rapid strings Harsh cleaning chemicals and adverse weather It’s a professional-grade upgrade meant for serious use. Installer-Friendly: 27mm Wrench Flats & Shim Step Griffin engineered this adapter to be easy to install correctly: 27mm wrench flats give you a solid grip point for torquing to the recommended ~50 ft-lbs. Palmetto State Armory+2Pelcher Outdoors+2 A step-cut shoulder is machined at the front to accept timing shims (not included), letting you perfectly time your muzzle brake or flash hider once the adapter is installed. Ammunition Depot+1 So you get both secure torque at the barrel and precise timing at the muzzle—critical when using directional brakes or QD suppressor mounts. Optimized for 7.62×39 & .30-Cal AKs Where the 1/2x28 version of this adapter is tuned for 5.45 and 5.56 AKs, the 5/8x24 24MM5824A is ideal for: Black Ankle Munitions+2Ammunition Depot+2 7.62×39 AK rifles with 24mm x 1.5mm muzzle threads Other .30-caliber AK-pattern rifles using 24mm FSB threading Builds where you want to run 7.62/.30-cal suppressors and muzzle devices that all share 5/8x24 Griffin notes this adapter is not intended for applications larger than 7.62mm projectiles, keeping you safely within design specs. Black Ankle Munitions+1 Ideal Use Cases The Griffin Armament Suppressor Mount Thread Adapter 5/8"x24 is perfect for AK owners who want to: Run .30-cal suppressors using common 5/8x24 mounts Use AR-10 or .308 muzzle brakes and flash hiders on 24mm AK barrels Avoid permanent gunsmithing like cutting/rethreading the barrel Ensure a more concentric, properly indexed suppressor mount than typical detent-based AK muzzle devices Whether your rifle is for range fun, competition, or serious defensive use, this adapter brings your AK into the modern muzzle-device world. Always perform a visual bore alignment check with a suppressor installed before live fire—especially on surplus or modified rifles. Shooting Surplus+2alpinerange.com+2 Key Specs – Griffin 24MM5824A 5/8x24 Adapter From Griffin Armament and major retailers: Shooting Surplus+2Ammunition Depot+2 Product Name: Griffin Armament Suppressor Mount Thread Adapter 5/8"x24 Melonite QPQ Black Manufacturer: Griffin Armament Manufacturer Part Number: 24MM5824A UPC: 791154082256 Ammunition Depot+2Canoe Creek Armory+2 Barrel Thread (Input): 24×1.5mm RH Muzzle Thread (Output): 5/8×24 Material: 17-4 stainless steel Finish: Melonite QPQ black Length: ~1.7" Outside Diameter: ~1.17" Outside Thread Length: ~0.56" Black Ankle Munitions Wrench Flats: 27mm Recommended Torque: 50 ft-lbs (gunsmith install recommended) Shooting Surplus+2alpinerange.com+2 Caliber Range: Intended for 7.62×39 and under (≤ 7.62mm) Black Ankle Munitions+1 Why Choose the Griffin Armament 24MM5824A? Converts 24mm AK threads to industry-standard 5/8x24 Suppressor-focused design with muzzle-face indexing for better alignment Rugged 17-4 stainless steel and Melonite QPQ finish for long service life Supports timed muzzle devices and QD suppressor mounts with shim-friendly shoulder Backed by Griffin’s reputation for high-quality suppressor accessories If you’re ready to modernize your 24mm AK and run the same 5/8x24 suppressors and muzzle devices trusted on .30-cal ARs and precision rifles, the Griffin Armament Suppressor Mount Thread Adapter 5/8"x24 Melonite QPQ Black – 24MM5824A is the professional, durable solution. The End