GrovTec US Inc 2.2 Inch 5 Slot Keymod Black Anodized GTSW227

The GrovTec US Inc 2.2 Inch 5 Slot Keymod Picatinny Rail, Black Anodized (GTSW227, UPC 811071012270) is a compact KeyMod accessory rail designed to add a MIL-STD-1913 Picatinny interface to modern modular handguards. Precision CNC machined from lightweight solid aluminum and finished with a Type III black hardcoat anodizing, this 2.2" rail section provides five Picatinny slots for securely mounting lights, lasers, optics mounts, and other rail-compatible accessories without adding unnecessary bulk. Palmetto State Armory+2Mid South Shooters Supply+2 Model Identification and Core Specs Manufacturer: GrovTec US Inc Model / Description: 2.2 Inch 5 Slot Keymod Picatinny Rail Part Number (MPN): GTSW227 UPC: 811071012270 TLO Outdoors+2USA Gun Store+2 Interface: KeyMod (mounting), MIL-STD-1913 Picatinny (top rail) Length: 2.2 inches Slot count: 5 Picatinny slots Ready Gunner+3Palmetto State Armory+3Buds Gun Shop+3 This rail section is part of GrovTec’s KeyMod Picatinny Rail line and is intended for use on any KeyMod-equipped handguard or fore-end where a short, rigid section of Picatinny is needed. Construction, Material, and Finish The GTSW227 is built for durability while keeping weight low: Material: Lightweight, solid aluminum, precision CNC machined for dimensional consistency and rigidity. Palmetto State Armory+2Mid South Shooters Supply+2 Finish: Type III black hard anodized / black hardcoat anodized for enhanced wear and corrosion resistance and a non-reflective matte appearance. Ammunition Depot+3Palmetto State Armory+3Mid South Shooters Supply+3 Approximate weight: Around 0.08 lb (kit weight as listed by distributors), adding minimal mass to the front of the rifle. BattleHawk Armory+1 Type III hardcoat anodizing increases surface hardness and helps protect the aluminum body from abrasion, impact, and environmental exposure. KeyMod Mounting Interface On the underside, the rail is machined to interface directly with KeyMod slots: Mounting system: KeyMod, designed to fit the popular KeyMod handguard standard. Mid South Shooters Supply+2GrovTec+2 Function: Converts a section of KeyMod slots into a continuous MIL-STD-1913 Picatinny rail segment. Georgia Guns & Ammo+2TLO Outdoors+2 This makes the GTSW227 ideal for users who run KeyMod handguards but need to attach traditional Picatinny-mount accessories at specific positions on the rail. Picatinny Rail Surface and Accessory Compatibility The top surface follows the MIL-STD-1913 Picatinny pattern: Standard: MIL-STD-1913 (Picatinny) rail specification. Slots: 5 contiguous slots along the 2.2" length. Alpine Range+3Palmetto State Armory+3Buds Gun Shop+3 Typical compatible accessories include: Weapon lights and illumination tools Laser aiming devices Offset or micro optics mounts (where length permits) Rail-mounted sling adapters Handstops or small grips designed for short Picatinny segments Palmetto State Armory+2Ammunition Depot+2 The compact 2.2" form factor offers enough real estate for most short accessories without crowding the handguard. Included Hardware and Installation GrovTec ships the GTSW227 with all necessary mounting hardware: Included: KeyMod mounting hardware (screws and KeyMod nuts) Allen (hex) key for installation GrovTec+3Palmetto State Armory+3Mid South Shooters Supply+3 Installation overview: Position the rail section over the desired KeyMod slots on the handguard. Insert the KeyMod nuts into the slots from inside or as per standard KeyMod procedure. Align the rail and loosely thread the screws through the rail into the nuts. Adjust final position for alignment and accessory placement. Tighten screws evenly with the supplied Allen key to secure the rail. Mid South Shooters Supply+2Graf & Sons+2 Once installed, the rail provides a solid, wobble-free platform when mounted to a properly spec’d KeyMod handguard. Dimensional and Packaging Details Distributor listings provide the following dimensional information for the packaged product: Nominal rail length: 2.2" (5 slots) Buds Gun Shop+2Ready Gunner+2 Listed package dimensions: approx. 1.65" x 2.90" x 5.35" (H × W × L). BattleHawk Armory+2Ready Gunner+2 These dimensions make it a compact accessory that can be placed at strategic locations on the handguard without significantly affecting handling. Typical Use Cases The GrovTec US Inc 2.2 Inch 5 Slot Keymod Picatinny Rail GTSW227 is well suited for: Adding a short Picatinny section for a weapon light or laser near the front of a KeyMod handguard. Mounting a rail-based QD sling adapter or handstop at a specific location. Providing a minimal rail footprint for low-profile accessories on competition, duty, or hunting rifles that use KeyMod fore-ends. Ammunition Depot+2Mid South Shooters Supply+2 Because it is modular and removable, the rail can be repositioned or removed entirely as configurations change, without replacing the entire handguard. Technical Specification Summary GrovTec US Inc 2.2 Inch 5 Slot Keymod Black Anodized – GTSW227 Brand: GrovTec US Inc Model: 2.2 Inch 5 Slot Keymod Picatinny Rail Part Number: GTSW227 UPC: 811071012270 TLO Outdoors+2USA Gun Store+2 Length: 2.2" Slots: 5 Picatinny slots Mounting system: KeyMod Top interface: MIL-STD-1913 Picatinny rail Material: Precision CNC-machined solid aluminum Finish: Type III black hard anodized / black hardcoat anodized Alpine Range+3Palmetto State Armory+3Mid South Shooters Supply+3 Included: KeyMod mounting hardware and Allen key Palmetto State Armory+2Mid South Shooters Supply+2 Approx. weight: ~0.08 lb (kit) BattleHawk Armory+1 By combining a KeyMod mounting interface, a 2.2" five-slot MIL-STD-1913 Picatinny surface, precision CNC-machined aluminum construction, and a durable Type III black hardcoat anodized finish, the GrovTec US Inc 2.2 Inch 5 Slot Keymod Black Anodized GTSW227 (UPC 811071012270) offers a compact, technical solution for adding standardized accessory mounting capability to KeyMod-equipped rifles and carbines. The End