Gun Butter Pen Oiler — 1/4 oz Precision Lubricant | PENOILER1/4 | UPC 790757777606
Meet the Gun Butter Pen Oiler (1/4 oz)—a precision applicator filled with a premium, long-lasting firearm lubricant engineered to keep your guns running smoother, cleaner, and longer. The needle-point pen lets you place a micro-drop exactly where it belongs—on rails, sears, bolt lugs, firing pin channels (where appropriate), trigger pivots, safety detents, extractor pins, and other tight clearances—without over-lubing or making a mess. Whether you maintain a hard-use carbine, a carry pistol, a competition shotgun, or heirloom revolvers, PENOILER1/4 gives you professional-level control in a compact, range-bag-ready form factor.
Model/SKU: PENOILER1/4
UPC: 790757777606
Size: 1/4 oz (0.25 fl oz) precision pen oiler
Type: Premium firearm lubricant with needle applicator
Why Shooters Choose the Gun Butter Pen Oiler
Pinpoint application: A fine stainless needle delivers one precise drop at a time—perfect for micro-clearances where a cloth or bottle spout can’t reach.
Clings under heat and pressure: Formulated to maintain a protective film across a wide temperature range, reducing metal-to-metal wear during high round counts.
Resists migration: Stays where you put it to minimize sling-off and creep into optics, primers, or wood stocks.
Smooth cycling: Reduces friction on slide rails, BCG contact points, pump action bars, and other interfaces for a fluid, reliable feel.
Rust & corrosion protection: Helps protect bare and blued steel, nitrided and parkerized parts, and small springs/pins against moisture and sweat.
Travel- and bench-friendly: Leak-resistant cap and compact size drop easily into a range bag, armorer’s kit, or cleaning caddy.
Ideal Uses (By Platform)
Handguns: Slide rails, barrel hood/locking lugs, connector/trigger bar contact, sear engagement points (per manufacturer guidance).
AR-Pattern Rifles: Cam pin path, bolt lugs, gas rings exterior, carrier rails, charging handle track, forward assist.
Shotguns: Action bars, carrier pivots, bolt rails, bolt linkages, extractor pins.
Bolt Guns: Cocking piece, locking lugs, bolt body raceways (light film), trigger and safety pivots (when manufacturer-approved).
Revolvers: Hand/pawl contact, cylinder ratchet, crane/yoke, ejector rod threads (light), cylinder lock and pivot points.
Always follow your firearm manufacturer’s maintenance guidelines and avoid contaminating primers, ammunition, optics, or wood finishes.
How to Use (Quick Guide)
Unload & clear the firearm. Verify chamber and magazine are empty.
Clean first: Remove carbon/fouling; dry contact points.
Apply micro-drops: Use the needle tip to place the thinnest visible film on friction surfaces.
Cycle by hand: Distribute the oil; wipe any visible excess.
Re-check after live fire: Add a touch if the action feels dry; log where and how much you applied.
Key Benefits at a Glance
Precision needle tip for tight spaces
High-film strength for sustained lubrication
Corrosion inhibitors to help prevent rust
Low odor, clean handling formulation
Leak-resistant cap and pocketable 1/4 oz size
Model: PENOILER1/4 | UPC: 790757777606
Best Practices & Safety
Use sparingly—a thin film is typically sufficient.
Keep away from ammunition and primers; do not allow oil to contaminate cartridges.
Store upright in a cool, dry place with the cap securely installed.
Test on an inconspicuous area before using on wood or composite finishes.
Dispose of cloths and swabs according to local regulations.
Maintenance Tips from the Bench
Mark your points: A small photo or diagram of your gun with dots at lube spots saves time later.
Track intervals: High-round-count guns benefit from a quick wipe-and-re-lube at known round markers.
Seasonal checks: Humid climates and carry use (sweat exposure) may require slightly more frequent corrosion checks.
Pair with a good cleaner: Oil lubricates—don’t skip cleaning. Use a compatible solvent/CLP to remove fouling before reapplication.
Specifications (Quick Reference)
FAQs
Q: Can I use this on polymer guns?
A: Yes—apply to metal-to-metal interfaces inside polymer-framed pistols (e.g., slide rails, barrel hood), avoiding polymer surfaces when possible.
Q: Is it safe for blued finishes?
A: A light film helps protect blued steel from rust. Wipe away excess to prevent prints or smudging.
Q: Will it thicken in cold weather?
A: The formulation is designed for broad temperature stability. In extreme cold, apply an even thinner film and cycle the action before use.
Q: Can I oil trigger components?
A: Only where the manufacturer recommends. Some triggers prefer dry films. Apply extremely sparingly and keep oil off sear faces if not specified.
Q: How long does 1/4 oz last?
A: Because each application uses micro-drops, a single pen typically lasts through many full clean-and-lube cycles.
SEO-Friendly Highlights (Naturally Woven)
Gun Butter Pen Oiler 1/4 oz, precision needle applicator gun oil, high-film-strength firearm lubricant, anti-corrosion gun oil for pistols, rifles, shotguns, revolvers, bench and range kit lube, PENOILER1/4, UPC 790757777606.
Meta for Your Product Page
Meta Title: Gun Butter Pen Oiler — 1/4 oz Precision Needle Gun Oil | PENOILER1/4
Meta Description: Lubricate with precision using the Gun Butter Pen Oiler 1/4 oz. Needle-tip control, high-film-strength protection, corrosion resistance. Ideal for slides, rails, triggers, and tight interfaces. SKU PENOILER1/4 — UPC 790757777606.
Keep your firearms running smooth, clean, and consistent—drop by precise drop—with the Gun Butter Pen Oiler (1/4 oz).
The End
