Hogue HandALL Beavertail Grip Sleeve — Slate Gray Rubber | Fits Sig Sauer P320 Full Size | Model 17602 | UPC 743108176023
Transform Your P320’s Feel With No-Gunsmithing Comfort & Control
Upgrade your Sig Sauer P320 Full Size in minutes with the Hogue HandALL Beavertail Grip Sleeve in Slate Gray. Engineered from Hogue’s proprietary thermo-elastomer rubber, this sleeve adds a tacky, hand-filling texture, palm-swell ergonomics, and a built-in beavertail to improve recoil control and reduce felt snap. The result? A more confident purchase, quicker follow-up shots, and a consistent, repeatable grip—rain or shine, gloves or bare hands.
Purpose-shaped for full-size P320 grip modules, the HandALL Beavertail installs without permanent modification. If you want EDC-ready traction and range-day comfort while keeping your factory frame, this is the cleanest upgrade you can make.
Key Features at a Glance
Model-Specific Fit: Designed for the Sig Sauer P320 Full Size grip module*
Beavertail Support: Integrated beavertail cushions the web of the hand and encourages a high, recoil-controlling grip
All-Weather Traction: Hogue’s tacky rubber surface enhances control in sweat, rain, or cold conditions
Comfort Ergonomics: Gentle palm swells and finger grooves promote repeatable hand placement
Shock-Absorbing Compound: Thermo-elastomer rubber helps dampen felt recoil and reduce fatigue over long sessions
Non-Permanent Install: Slides on—no gunsmithing, adhesives, or frame alterations required
Colorway: Slate Gray for a modern, low-profile aesthetic
Model / UPC: 17602 / 743108176023
*Fits P320 Full Size frames. Grip modules and magazines vary—see compatibility notes below.
Why Shooters Choose HandALL Beavertail for the P320
Confident, High Grip = Better Control
The extended beavertail gently guards the web of your hand and encourages a high tang grip for superior leverage. That translates to faster sight recovery and less muzzle rise.
Secure Traction in Real Conditions
Hogue’s rubber formula stays tacky across temperatures and weather, providing secure purchase in training, duty, or competition.
Comfort That Lasts
The palm swells and contoured finger grooves make long range days easier. You’ll notice less hot-spotting and a natural point-of-aim when you draw.
Zero-Commitment Upgrade
Because installation is non-permanent, you can revert to stock at any time or swap sleeves between compatible full-size P320 grip modules.
Ideal Use Cases
EDC / Duty: Confident grip under stress, sweaty hands, or bad weather
Range & Training: Reduced fatigue with improved repeatability for drills
Competition Practice: Faster follow-up shots from improved recoil control
Cold-Weather Shooting: Tacky texture helps offset bulky gloves
Compatibility & Fit Notes
Designed For: Sig Sauer P320 Full Size 9/40/357 grip modules (X-Series and TXG modules may vary in feel/tightness)
May Also Fit: M17 (full-size P320 variant) with standard full-size grip module
Not For: P320 Compact, Carry, X-Compact, or Subcompact grip modules; not for alloy or custom oversized frames
Holster Fit: External sleeve typically preserves holster compatibility, but always re-test your holster after installation
Variations in polymer molding and module generations can affect tightness. A snug fit is normal and desirable.
Quick Installation Guide
Verify Safe & Clear: Remove the magazine and ensure the chamber is empty.
Prep the Sleeve: Warm the sleeve slightly with warm water or a hair dryer (low heat) to increase elasticity.
Lube Lightly: A small amount of water with a drop of dish soap on the frame (not oil) helps it slide.
Install: Stretch the sleeve over the grip, align finger grooves and the beavertail, and seat fully.
Let It Set: Wipe off solution and let it dry. Re-check alignment after a few minutes.
Avoid petroleum lubricants during installation—they can affect rubber tack.
Care & Maintenance
Routine Cleaning: Wipe with mild soap and water; avoid harsh solvents or strong DEET repellents
Inspect: Check edges for lift after heavy use; reseat if needed
Storage: Keep away from direct, prolonged heat sources
Technical Specifications (17602)
Brand: Hogue
Series: HandALL Beavertail Grip Sleeve
Material: Thermo-elastomer rubber
Color: Slate Gray
Fit: Sig Sauer P320 Full Size grip modules
Install: Slide-on, non-permanent
Model Number: 17602
UPC: 743108176023
Frequently Asked Questions
Q: Will this fit my P320 Compact or Carry?
A: This model is shaped for the Full Size frame. Compact/Carry/Subcompact modules use different dimensions—choose the sleeve designed for those sizes.
Q: Does the sleeve interfere with magazine release or magwell funnels?
A: When aligned correctly, the sleeve does not obstruct the mag release. Check clearance if using oversized magwells.
Q: Will it affect my holster?
A: Most holsters remain compatible. Always perform a safe holster check after installation to verify retention and draw.
Q: Can I remove and reinstall it?
A: Yes. The installation is non-permanent. Use the warm water method to remove and re-fit if needed.
SEO-Rich Highlights & Buyer Keywords
Hogue HandALL Beavertail grip sleeve for Sig Sauer P320 Full Size
Slate Gray rubber pistol grip sleeve with tacky texture
Recoil-damping, palm swell, finger grooves, improved control
Non-permanent installation, no gunsmithing required
Model 17602, UPC 743108176023
Meta Title (SEO)
Hogue HandALL Beavertail Grip Sleeve — Slate Gray Rubber, Fits Sig P320 Full Size | 17602
Meta Description (SEO)
Upgrade your Sig P320 Full Size with the Hogue HandALL Beavertail Grip Sleeve in Slate Gray. Tacky rubber texture, palm swells, and built-in beavertail for superior control and comfort. Model 17602, UPC 743108176023.
Structured Data (Product Schema JSON-LD)
Responsible Use Reminder
After any accessory installation, verify safe function, check holster fit and magazine ejection, and practice safe firearm handling at all times.
The End
