Hogue HandAll™ Beavertail Grip Sleeve — Textured Flat Dark Earth Rubber — Fits Glock 19 / 23 / 32 / 38 Gen 3–4 — Model 17043 — UPC 743108170434
Meta (SEO) short description: Hogue HandAll Beavertail rubber grip sleeve in Flat Dark Earth (model 17043, UPC 743108170434) — textured, slip-on beavertail sleeve that improves purchase and control for Glock 19, 23, 32 and 38 Gen3–4 pistols. Quick to install, weather-resistant, and designed for everyday carry and range use.
Product Overview
The Hogue HandAll Beavertail Grip Sleeve (17043) is a simple, effective upgrade that instantly improves the ergonomics and control of Glock subcompact and compact pistols. Molded from resilient, high-friction rubber and finished in Flat Dark Earth (FDE), this textured sleeve slips over the OEM polymer frame and adds a protective beavertail extension so you get better high-hand placement, reduced muzzle flip, and a noticeably more comfortable grip without permanent modification.
Designed specifically to fit Glock 19, 23, 32 and 38 in Gen3–Gen4 configurations, the Hogue HandAll is an ideal option for concealed carriers, defensive shooters, and range enthusiasts who want a low-cost, reversible upgrade that increases confidence and control.
Key Features & Benefits (SEO keywords included)
Fits Glock 19 / 23 / 32 / 38 — Gen3 & Gen4: Engineered for a snug slip-on fit over factory frames for the listed models.
Beavertail profile: Extended rear coverage improves high-hand placement, covers sharp frame edges, and reduces hot-surface contact during fast strings of fire.
Textured traction surface: Aggressive but comfortable pattern increases purchase in wet, sweaty, or gloved conditions — improves recoil control and follow-up speed.
Flat Dark Earth (FDE) finish: Tactical, low-visibility color that pairs with FDE slides, sights or accessories and blends with modern gear.
Durable rubber compound: Flexible, tear-resistant material resists oils, sweat, and common range chemicals while remaining comfortable against skin.
Non-permanent upgrade: Slip-on installation — no tools, gunsmithing, or permanent alteration required; removable and reversible for resale or rental guns.
Low-profile concealment: Adds ergonomics without significantly increasing overall dimensions — ideal for IWB or OWB carry setups.
Improves comfort & control: Reduces bite from the frame under recoil and softens pressure points for extended training sessions.
Product Specifications
Model / MPN: Hogue HandAll Beavertail Grip Sleeve — 17043
UPC: 743108170434
Color / Finish: Flat Dark Earth (FDE)
Material: High-friction molded rubber (weather- and oil-resistant compound)
Fitment: Glock 19, 23, 32, 38 — Generation 3 and Generation 4 pistols (factory frame geometry)
Installation: Slip-on sleeve (no tools required)
Installation — Fast, Tool-Free
Make sure the firearm is unloaded and the magazine removed. Clear the chamber and follow all safety practices.
With the pistol pointed in a safe direction, slide the HandAll sleeve onto the frame from the front or rear depending on preference, aligning cutouts with the trigger guard, slide release and magazine well.
Push firmly until the sleeve seats fully and the beavertail rests snugly against the rear of the frame.
Confirm full function of controls (slide release, magazine release) and perform a function check with an unloaded gun before live-fire use.
Because the sleeve is a stretch-fit design, warming it briefly with warm (not hot) water can make installation easier in colder conditions. If fit is tight or if your pistol has an aftermarket extended magazine release, takedown lever, or oversized controls, verify clearance and control operation before relying on the sleeve in defensive scenarios.
Use Cases & Who It’s For
Concealed carriers who want added comfort and faster follow-up shots without changing holsters.
Range shooters seeking a low-cost, non-destructive ergonomics upgrade for longer, less-fatiguing sessions.
New shooters who gain confidence with a fuller grip and softer bite on the web of the hand.
Rental and department arms where a durable, removable improvement is preferred over permanent frame mods.
Care & Maintenance
Cleaning: Remove the sleeve and wash with mild soap and warm water. Rinse and air dry completely before reinstalling.
Avoid harsh solvents: Don’t use aggressive petroleum solvents or strong detergents that can degrade the rubber compound.
Storage: Keep away from prolonged direct sunlight or extreme heat to avoid premature aging. Replace the sleeve if you notice cracking, excessive wear, or loss of elasticity.
Compatibility & Fitment Notes (Important)
Designed for factory Glock 19/23/32/38 Gen3 and Gen4 frames. Does not permanently alter the pistol — however, some aftermarket frame accessories (magazine extensions, extended controls, or aggressive stippling jobs) may interfere with fit. Verify clearance and functional checks before live-fire. If your pistol uses a Gen5 or other aftermarket frame, check fitment with the vendor or consider Hogue options made for that generation.
Why Choose Hogue HandAll Beavertail Sleeve?
Hogue is a trusted name in firearm ergonomics and grips. The HandAll Beavertail Grip Sleeve blends proven material technology with a form-factor that solves common complaints: frame bite, poor purchase, and slippery controls. Affordable, reversible, and easy to install, the sleeve is a practical first upgrade that delivers immediate, measurable results for shooters of all experience levels.
SEO-Optimized Closing Paragraph
Upgrade your Glock’s ergonomics quickly and affordably with the Hogue HandAll Beavertail Grip Sleeve (Model 17043, UPC 743108170434) in Flat Dark Earth. This textured rubber sleeve fits Glock 19, 23, 32 and 38 (Gen3–Gen4) frames, adds a comfortable beavertail for high-hand placement, improves traction in adverse conditions, and installs without tools or permanent modification. Perfect for concealed carriers, range enthusiasts, and anyone who wants better control and comfort from their compact Glock platform — try the HandAll sleeve and feel the difference on your next range session.
The End
