Hogue Modular OverMolded Pistol Grip — OD Green Rubber with Finger Grooves, Fits AR-15/M16

Model: 13041 • UPC: 743108130414

Upgrade your AR’s ergonomics with the Hogue Modular OverMolded Pistol Grip in OD Green. Built on a precision reinforced polymer frame that’s permanently OverMolded® with Hogue’s signature rubber, this grip delivers a secure, tacky purchase in wet or gloved conditions—without the harsh edges or slip of hard plastic. Contoured finger grooves and a palm-filling profile promote a natural, repeatable grasp that helps stabilize the rifle for cleaner trigger presses and faster follow-up shots. Compatible with AR-15/M16 pattern lowers (most mil-spec receivers), it’s the simple, high-value upgrade your carbine deserves.

Why Choose the Hogue OverMolded AR Grip

• All-Weather Traction: Hogue’s OverMolded rubber offers a non-slip, shock-absorbing surface that stays grippy in rain, sweat, or cold.

• Finger-Groove Control: Sculpted finger grooves and palm swells enhance index and leverage, improving weapon control during strings of fire.

• Neutral Wrist Angle: Ergonomic geometry supports a straighter trigger finger line, aiding consistency from prone, bench, or barricade.

• Durable Core: Reinforced polymer internal frame resists flexing and temperature extremes while keeping weight low.

• Comfort Without Abrasion: The rubber exterior softens pressure points and reduces fatigue over long training days.

• OD Green Finish: Classic OD Green complements field rifles and blends with popular furniture colors and camo builds.

• Drop-In Fit: Designed for most AR-15/M16 lowers using the standard grip screw and selector detent spring channel.

Fit Note: Works with most mil-spec and many commercial lowers. Some billet receivers may require minor fitting due to proprietary contours.

Field & Range Benefits

• Firmer Hold Under Recoil: Tacky rubber minimizes shifting, supporting tighter split times.

• Better Trigger Discipline: Natural indexing helps keep the trigger finger straight until you’re ready to press.

• Glove-Friendly Texture: Micro-pebble pattern provides traction without shredding gloves or clothing.

• Temperature Comfort: Rubber surface is less cold-soaking than bare polymer or aluminum in winter conditions.

Features & Specifications (At a Glance)

• Brand/Series: Hogue OverMolded® Modular AR Grip

• Color: OD Green

• Material: Reinforced polymer core with OverMolded rubber exterior

• Texture: Non-slip, micro-pebble with contoured finger grooves

• Fitment: AR-15/M16 lower receivers (standard grip interface)

• Hardware: Uses standard AR grip screw & washer (check package contents)

• Weight: Lightweight, range-friendly (varies by production)

• Model / SKU: 13041

• UPC: 743108130414

Installation (5-Minute Drop-In)

1. Ensure Firearm is Unloaded. Remove magazine, lock bolt, and visually/physically verify clear.

2. Remove Old Grip. Support the safety detent spring; back out the grip screw slowly to avoid bending the spring.

3. Align the New Grip. Transfer the detent spring into the Hogue grip’s channel; align to the receiver boss.

4. Secure. Install the grip screw with a small amount of blue threadlocker; snug to manufacturer torque (do not overtighten).

5. Function Check. Verify safety selector operation and positive detent engagement.

Pro Tip: While the grip is off, inspect the selector detent for wear and replace if needed.

Ideal Setups

• General-Purpose Carbines: Balanced control for training, defense, and varmint duty.

• DMR & Recce Builds: Comfortable support hand geometry for precision trigger breaks.

• Hunting ARs: Non-slip traction in rain or cold weather with gloves.

• Competition Rifles: Repeatable grip index for fast transitions and consistent splits.

Care & Maintenance

• Clean Easily: Wipe with mild soap and water; avoid harsh solvents on the rubber exterior.

• Threadlocker: Use medium strength on the grip screw to prevent loosening.

• Periodic Check: Inspect screw tightness and spring channel during routine maintenance.

Frequently Asked Questions

Will it fit AR-10/DPMS-pattern lowers?
Some AR-10 lowers share the AR-15 grip interface; many will fit. Check your specific receiver’s compatibility.

Is the rubber surface sticky in hot weather?
It’s tacky for traction, not gummy. It resists slipping without leaving residue on hands or gloves.

Does it include the grip screw?
Packages vary by distributor. If not included, reuse your standard AR grip screw (and washer) or purchase one separately.

Will the finger grooves fit small hands?
The contour is designed for a wide range of hand sizes. If you prefer a smoother frontstrap, Hogue also offers groove-less variants in the OverMolded line.

SEO Highlights (Naturally Integrated)

Hogue OverMolded AR-15/M16 pistol grip, OD Green rubber grip with finger grooves, non-slip texture, reinforced polymer core, ergonomic AR grip upgrade, fast drop-in installation, improved control and comfort, Model 13041, UPC 743108130414.

Build Smarter, Shoot Better

From wet range days to long hunts and high-round-count classes, the Hogue OverMolded OD Green AR Grip gives your rifle a confident, comfortable hold that translates into steadier sights and cleaner shots.

The End