JK Armament 195 — 12 Gauge, Black, 17-4 Stainless, 7/8x32 TPI (JKMDHDBE127/8X32 | UPC 850038425869)
Upgrade your shotgun with a field-tough, precision-machined component built to deliver repeatable point of impact and reliable pattern performance. The JK Armament 195 (Black) uses 17-4 precipitation-hardened stainless steel for outstanding strength, heat resistance, and corrosion protection—and is threaded 7/8x32 TPI for compatible 12-gauge barrels. The durable black finish shrugs off mud, rain, and salt spray while the precision cut threads and shoulders promote true, concentric alignment for consistent results on the marsh, in the uplands, or on the clays course.
Why Shotgunners Choose the JK Armament 195 (Black, 7/8x32)
17-4 PH stainless durability: Industry-trusted alloy that resists galling, pitting, and heat degradation during high round counts and harsh weather.
Precision 7/8x32 TPI threading: Clean, concentric threads help seat straight and hold tight on compatible 12-ga barrels for consistent POI and pattern density.
Corrosion-fighting black finish: Low-glare surface that wipes clean after mud or saltwater and looks professional on any setup.
Built for real conditions: Designed to handle frequent installs and removals without loosening or seizing when properly maintained.
Compatibility Note: Shotgun choke/mount thread systems vary by manufacturer and model. The 7/8x32 TPI thread is not universal. Always confirm the thread specification marked on your barrel or in the owner’s manual before purchase or installation. Do not attempt to fit into non-matching threads.
Key Specifications
Model/Series: JK Armament 195
Gauge: 12 Gauge
Material: 17-4 PH stainless steel
Finish/Color: Black (low-glare)
Thread: 7/8x32 TPI
Item/SKU: JKMDHDBE127/8X32
UPC: 850038425869
Use Cases: Waterfowl, upland, turkey (per constriction/config), sporting clays, trap/skeet, general range and field work
Constriction & Shot Types: If this component is a choke/mount interface, actual constriction, porting, and approved shot types (lead/steel/bismuth/tungsten) depend on the specific version you select. Follow JK Armament’s published guidance for your model and intended loads.
Field Advantages You’ll Notice
Centered patterns, repeatable POI: Precision machining supports straight-line alignment that helps keep your pattern center where you zeroed it—even after removal and reinstallation.
Confidence in wet, cold weather: 17-4 stainless and the black protective finish resist corrosion from rain, snow, and salt spray.
Maintenance made simple: Smooth threads make install and removal quick; fouling and wad residue clean up easily with standard tools and solvents.
Ideal For
Waterfowl hunters working in flooded timber, marsh, or coastal environments.
Upland and small-game hunters who fine-tune constriction for cover, shot size, and distance.
Clay shooters who change setups between stations and want repeatable patterns.
12-ga owners standardizing on a robust stainless component with 7/8x32 threading.
Installation & Care
Verify unloaded. Check chamber and magazine are clear.
Clean muzzle & threads. Remove grit and plastic wad fouling from the barrel and the component.
Lightly lube threads. Use a choke-safe oil/grease to prevent galling and seize.
Seat and snug. Hand-tighten; use the appropriate tool/wrench if specified—do not over-torque.
Re-check tightness. Inspect after initial shots and periodically during use.
After the hunt/range: Remove, wipe dry, and lightly oil threads before storage.
Patterning Best Practices
Pattern on paper at realistic distances for your game or sport; record pellet counts and point of impact.
Match constriction to shotshell and distance. Open patterns for close-in birds; tighter patterns for longer crossers or turkey.
Confirm shot-type approvals. Ensure compatibility with steel, bismuth, or tungsten loads as applicable.
Document results. Keep notes by load, weather, and distance to repeat success season after season.
SEO Highlights (For Shoppers & Merchandisers)
Primary Keywords: JK Armament 195 12 Gauge, black 17-4 stainless, 7/8x32 TPI, JKMDHDBE127/8X32, UPC 850038425869.
Related Keywords: stainless shotgun choke 12-ga, 7/8-32 TPI choke/mount, corrosion-resistant shotgun accessory, precision shotgun threads.
Value Propositions: 17-4 PH stainless strength, black corrosion-resistant finish, precise 7/8x32 TPI threading, repeatable POI/pattern performance.
What’s in the Box
JK Armament 195 — 12 Gauge, Black, 17-4 Stainless, 7/8x32 TPI
Basic fitment/maintenance information (per manufacturer)
Built for accuracy, built for weather, built to last—the JK Armament 195 (7/8x32 TPI, 12-ga) gives your shotgun a rugged, precision-fit stainless component that keeps patterns tight and performance consistent wherever you shoot.
"The End"
