JK Armament 195 — 12 Gauge, Black, 17-4 Stainless, 7/8x32 TPI (XL)

SKU: JKMDHDBE127/8X32XL | UPC: 850038425937

Built to thrive where other components rust or loosen, the JK Armament 195 (XL) is a 12-gauge precision part machined from 17-4 precipitation-hardened stainless steel and finished in low-glare black. Cut with 7/8x32 TPI threads for compatible barrels, this XL-length model emphasizes robust shoulder engagement and concentric alignment to help maintain repeatable point of impact and consistent pattern performance—on the marsh, in the uplands, or on the clays course.

Why Shotgunners Choose the JK Armament 195 (XL, 7/8x32)

• XL configuration for secure seating: Extended length provides generous thread engagement and stable shoulder contact, supporting concentric fit and reliable reinstallation.

• 17-4 PH stainless durability: Industry-favorite alloy resists galling, pitting, and heat—ideal for wet blinds, snowy fields, and high-volume range days.

• Precision 7/8x32 TPI threading: Clean, concentric threads help the part seat straight and hold tight on compatible 12-ga barrels for repeatable POI.

• Corrosion-fighting black finish: Low-gloss, field-friendly coating wipes clean after mud or saltwater and reduces glare in bright conditions.

• Built for real conditions: Designed for frequent install/removal cycles without seizing when properly maintained.

Compatibility Note: Shotgun thread standards vary by brand/model. 7/8x32 TPI is not universal. Always verify the exact thread spec marked on your barrel or in the owner’s manual before purchase or installation. Never attempt to install into non-matching threads.

Key Specifications

• Model/Series: JK Armament 195 (XL)

• Gauge: 12 Gauge

• Material: 17-4 PH stainless steel

• Finish/Color: Black, low-glare

• Thread: 7/8x32 TPI (barrel dependent)

• SKU: JKMDHDBE127/8X32XL

• UPC: 850038425937

• Use Cases: Waterfowl, upland, turkey (per constriction/config), sporting clays, trap/skeet, general hunting and range work

Constriction & Shot Types: If used as a choke/mount interface, actual constriction, porting, and approved shot materials (lead/steel/bismuth/tungsten) depend on the specific model selected. Always follow JK Armament’s guidance for your configuration and intended loads.

Field Advantages You’ll Notice

• Centered patterns, repeatable results: Precision machining and extended engagement help keep pattern center and POI consistent—even after removal and reinstallation.

• Confidence in bad weather: 17-4 stainless + black finish resist corrosion from rain, snow, and salt spray.

• Maintenance made simple: Smooth threads ease install/removal; wad/carbon fouling cleans quickly with standard choke tools and solvents.

Ideal For

• Waterfowl hunters who demand rust-resistant hardware that won’t shift pattern center after a morning in the marsh.

• Upland & turkey hunters tailoring constriction to cover density and shot distance.

• Clay shooters making frequent changes between stations who need repeatable POI and pellet distribution.

• 12-ga owners standardizing on a robust 7/8x32 stainless component across multiple compatible barrels.

Installation & Care

1. Verify unloaded. Check chamber and magazine.

2. Clean the bore and threads. Remove grit and plastic wad residue from both barrel and component.

3. Lightly lube threads. Use choke-safe oil/grease to prevent galling.

4. Seat and snug. Hand-tighten; use the correct choke tool/wrench if specified—do not over-torque.

5. Re-check during use. Inspect tightness after initial shots and periodically throughout the day.

6. Post-hunt routine. Remove, wipe dry, and lightly oil threads before storage.

Patterning Best Practices

• Pattern on paper at the distances you actually shoot (e.g., 30–40+ yards) and confirm pellet density/POI.

• Match constriction to load & range. Open for close covers/decoy work; tighten for longer crossing shots or turkey.

• Confirm material approvals. Verify steel/bismuth/tungsten compatibility for the constriction/configuration you select.

• Document results. Record load, weather, and distance to reproduce winning combinations.

SEO Highlights (For Shoppers & Merchandisers)

• Primary Keywords: JK Armament 195 XL 12 gauge, 7/8x32 TPI, black 17-4 stainless, JKMDHDBE127/8X32XL, UPC 850038425937.

• Related Keywords: stainless shotgun choke/mount, extended length choke 12-ga, corrosion-resistant shotgun accessory, precision 7/8-32 shotgun threads.

• Value Propositions: XL thread engagement for stability, 17-4 PH stainless strength, black corrosion-resistant finish, precise 7/8x32 TPI alignment, repeatable POI/pattern performance.

What’s in the Box

• JK Armament 195 (XL) — 12 Gauge, Black, 17-4 Stainless, 7/8x32 TPI

• Basic fitment/maintenance information (per manufacturer)

When consistent patterns and all-weather reliability matter, the JK Armament 195 (XL, 7/8x32 TPI) delivers a rugged, precision-fit stainless upgrade that keeps your shotgun performing at its best—season after season.

"The End"