Kleen-Bore Triple Action Nylon Utility Brush — 5", 50-Pack (Bulk)
Model: UT221-C-GLOBE / UT221CGLOBE • UPC: 026249005743 • Bristle Type: Nylon • Length: 5 inches • Pack Size: 50 Brushes
Equip your bench, classroom, or armory with the Kleen-Bore Triple Action Nylon Utility Brush (5", 50-Pack)—the bulk cleaning solution trusted by shooters, armorers, and instructors. Each compact brush features a double-ended, Triple Action layout that makes fast work of carbon, powder fouling, dirt, and grime. The standard head covers broad surfaces while the narrow detail head reaches into rails, lugs, threads, and tight corners. Finish-friendly nylon bristles deliver effective scrubbing without scratching most common firearm coatings, metals, and polymers.
Why This 50-Pack is a Smart Buy
Bulk Value for High Throughput: The 50-count carton is ideal for ranges, LE/mil units, classrooms, and busy shops—dedicate brushes by task or chemical and always have fresh tools on hand.
Triple Action Versatility: With a full-size brush head and a precision detail end, each brush replaces multiple single-purpose tools and speeds up cleaning.
Finish-Safe Nylon Filaments: Stiff enough to lift fouling yet gentle on blued, stainless, parkerized, anodized, and Cerakote®-type finishes when used correctly.
Compact 5" Control: Short handle enhances leverage and maneuverability inside slides, receivers, gas systems, compensators, and other confined spaces.
Kleen-Bore Quality: Consistent filament set, durable ferrule, and rigid handle deliver reliable performance session after session.
Key Features & Specs
Brand: Kleen-Bore
Product: Triple Action Nylon Utility Brush (bulk pack)
Bristle Material: Nylon (solvent-friendly, finish-conscious)
Length: 5 inches per brush
Ends: Standard head for broad areas + narrow detail head for tight spaces
Pack Size: 50 brushes (bulk)
Model Numbers: UT221-C-GLOBE / UT221CGLOBE
UPC: 026249005743
Typical Colors: Neutral handle with nylon bristles (may vary by batch)
Note: Brushes only; solvents, oils, patches, and accessories are sold separately.
What It Cleans Best
Firearms: Slides, rails, breech faces, locking lugs, extractor claws, bolt tails, gas keys, feed ramps, muzzle devices, and magazines.
Optics & Mounts: Scope ring threads, mount hardware, and picatinny/MLok interfaces (avoid lens surfaces—use lens-specific tools).
EDC & Tools: Knives, multitools, and gear pivots; removes grit from textured handles and jimping.
Reloading & Shop: Dies, shell plates, presses, and threadlocker residue on fasteners.
Real-World Benefits
Faster Turnaround: Double-ended design reduces tool changes so you clean more parts in less time.
Consistent Results: Nylon filaments maintain shape and scrub evenly, improving repeatability across large batches of gear.
Chemical Compatibility: Works with common degreasers, carbon/copper solvents, and protectants—rinse after use to extend life.
Hygienic Workflow: In bulk settings, assign brushes per station or per chemistry to avoid cross-contamination.
How to Use (Quick Guide)
Unload & Verify Safe before any cleaning task.
Apply Cleaner to the part or brush (follow chemical instructions).
Scrub Broad Areas with the standard head; use the detail end for crevices, threads, and edges.
Wipe & Inspect with patches or towels; repeat as needed.
Protect Surfaces with light oil or corrosion inhibitor where appropriate.
Care & Maintenance
Rinse bristles in warm, soapy water after solvent exposure; shake and air-dry.
Label or color-code brushes by solvent type to prevent chemical mixing.
Replace any brush with frayed or splayed bristles to maintain peak effectiveness.
Store in a clean, dry bin to keep filaments free of grit.
Compatibility & Finish Safety
Safe For: Most firearm metals and coatings, as well as polymer frames and accessories when used correctly.
Test First: With particularly aggressive or unknown chemicals, test on an inconspicuous spot to confirm finish compatibility.
Ideal Buyers & Use Cases
Range/Pro Shop & Armorers: Keep benches stocked for high-volume maintenance.
Training Schools & Clubs: Issue brushes to students or assign per cleaning station.
Hunters & Enthusiasts: Economical bulk supply for season-long care across multiple firearms.
Gunsmiths & Reloaders: Reliable, detail-friendly solution for presses, dies, and small components.
SEO Highlights (Copy & Paste)
Kleen-Bore Triple Action Nylon Utility Brush, 5", 50 pack
UT221-C-GLOBE / UT221CGLOBE • UPC 026249005743
Double-ended brush with standard and detail heads
Finish-safe nylon bristles for firearms and tools
Bulk cleaning brushes for ranges, shops, and armorers
Frequently Asked Questions
Q: How does nylon compare to brass or stainless bristles?
A: Nylon is the most finish-friendly and ideal for routine cleaning. Brass offers more bite for stubborn fouling, and stainless is the most aggressive—use only on appropriate, durable surfaces.
Q: Are these brushes reusable?
A: Yes. With proper rinsing and drying, each brush can handle many cleaning cycles. The 50-pack ensures a ready supply for busy environments.
Q: Will these work with strong copper or carbon solvents?
A: Nylon is generally solvent-resistant. Always follow the chemical manufacturer’s directions and rinse the brush after use.
Q: Can I use these on optics?
A: Use them on mounts and hardware only. For lenses or coated glass, switch to lens-specific tools to avoid damage.
Safety Reminder
Always follow the four rules of firearm safety. Wear gloves and eye protection when using solvents. Dispose of used patches and towels according to local regulations.
Streamline maintenance across your entire fleet with the Kleen-Bore Triple Action Nylon Utility Brush, 5", 50-Pack (UT221-C-GLOBE / UT221CGLOBE, UPC 026249005743)—the bulk, finish-safe solution for fast, detailed cleaning in shops, schools, and serious home benches. Clean smarter, protect your investment, and keep every component running flawlessly.
The End
