KRISS USA Vector Slide Rebuild Kit — OEM Replacement Parts (Model 12205001.ASM)
Restore factory-smooth cycling and reliability to your Vector with the KRISS USA Vector Slide Rebuild Kit (12205001.ASM). This genuine OEM kit includes the critical small parts and wear items needed to refresh the slide/reciprocating assembly on your KRISS Vector platform, bringing tolerances back to spec for confident function—on the range, in training, or during regular preventive maintenance.
Why Choose a Genuine KRISS USA Rebuild Kit
Factory-Correct Fitment: OEM components manufactured to KRISS USA specifications for proper geometry, spring rate, and clearances.
Reliability Refreshed: Replacing worn springs, pins, and small parts helps restore timing and cycling for consistent feeding and ejection.
Preventive Maintenance Made Easy: Keep a kit on hand to preempt stoppages and minimize downtime during classes or high-round-count sessions.
One-and-Done Convenience: Purpose-built kit groups the slide-related pieces you need—no guessing, no mix-and-match parts sourcing.
Protects Your Investment: Maintaining the slide assembly to factory spec supports accuracy, reduces unnecessary wear, and extends service life.
Note: Exact contents of the rebuild kit may vary by production run. Typical slide-related kits include a curated selection of springs, detents, pins, and small hardware for the Vector’s slide/reciprocating group. Always verify the kit’s contents and your model/caliber compatibility before installation.
Compatibility & Fit Notes
Platform: KRISS Vector series (slide/reciprocating assembly)
Model Number: 12205001.ASM
Generations & Calibers: Compatibility can vary by Gen/variant (e.g., CRB, SDP, SBR) and caliber (9mm, .45 ACP, 10mm).
Verify Before Purchase: Check your serial, generation, and caliber against KRISS USA’s latest guidance or your owner’s manual to ensure the correct kit.
When to Rebuild the Slide Assembly
High Round Count: Performance drift after extended use (weaker ejection, sluggish return to battery).
Inconsistent Cycling: Intermittent failures to feed/extract/eject that persist after cleaning and proper lubrication.
Spring Fatigue: Noticeably reduced spring tension or visible set in key springs.
Scheduled PM: Proactive swap at set intervals to keep a duty/training gun running at peak performance (where lawful).
Installation Overview (General Guidance)
Ensure Safe Condition: Unload, remove magazine, and visually/physically verify an empty chamber.
Fieldstrip & Access: Disassemble per KRISS Vector owner’s manual to access the slide/reciprocating group.
Replace Wear Items: Install included OEM parts one at a time, confirming correct orientation and seating.
Function Check: Reassemble and verify smooth travel, proper lockup, and positive manual manipulations.
Test Fire: Validate reliability with your primary ammunition after any parts replacement.
Pro Tip: Work over a non-marring bench mat with a magnetic parts tray. Photograph each stage before removal to mirror orientation during reassembly.
Care & Maintenance Tips
Clean, Then Lube: Carbon and fouling accelerate wear; clean contact points and apply quality lubrication sparingly.
Inspect Springs: Replace at the first sign of fatigue or deformation—don’t wait for a failure on the clock.
Track Round Counts: Logging usage helps you schedule proactive rebuilds and document performance.
Use Factory-Spec Parts: Mixing non-OEM components can impact timing and reliability.
What’s in the Box*
KRISS USA Vector Slide Rebuild Kit (slide/reciprocating assembly small parts)
OEM hardware and springs (contents may vary by run)
Factory packaging/documentation (when provided)
*Always review the included parts list on your received kit.
Safety & Compliance
Follow all local, state, and federal laws regarding ownership and configuration.
If you’re unfamiliar with armorer-level work, consult a qualified gunsmith or KRISS USA service for installation.
Perform a complete function and safety check before live fire after any component change.
SEO-Friendly Keywords (Use Naturally on Your Product Page)
KRISS Vector slide rebuild kit, 12205001.ASM, KRISS Vector OEM parts, Vector slide maintenance kit, KRISS USA replacement springs pins, Vector reliability upgrade, KRISS Vector Gen 2 slide kit, slide assembly refresh KRISS Vector.
Bring your Vector back to factory form with the KRISS USA Vector Slide Rebuild Kit (12205001.ASM)—genuine OEM parts, proven fit, and the confidence that comes from running your carbine the way KRISS intended.
The End
