The LanTac USA LLC SSR Super Short Reset Trigger Disconnector, 3.5 lb, Black Nitride, Fits Glock (01-GP-TDISC, UPC 712038709625) is a drop-in connector upgrade engineered to transform the feel of your Glock’s trigger without changing its familiar profile. Precision-machined, reshaped, and highly polished, this 3.5 lb Super Short Reset (SSR) disconnector reduces friction inside your fire control system for a smoother, lighter, and more consistent pull—while dramatically shortening reset for faster, more confident follow-up shots. 80 Lower+3lantac-usa+3Buds Gun Shop+3
Smoother, Lighter 3.5 lb Trigger Pull
The LanTac SSR 3.5 lb connector is designed to deliver the same basic trigger profile as your OEM Glock connector, but with a tuned, performance-oriented feel. 80 Lower+3lantac-usa+3MidwayUSA+3
Benefits of the 3.5 lb SSR connector:
Reduced trigger pull weight (approx. 3.5 lb, depending on your specific pistol and spring setup)
Highly polished and reshaped engagement surfaces to minimize friction between internal parts 80 Lower+3lantac-usa+3Buds Gun Shop+3
Noticeably smoother take-up and break, with less “gritty” or “mushy” feel than many factory connectors
More consistent pull from shot to shot, helping improve accuracy and control
If you’re not happy with a stock Glock trigger but don’t want to completely change to a full aftermarket unit, this connector is a smart, cost-effective upgrade.
Super Short Reset – Faster, More Confident Follow-Up Shots
As the name implies, the Super Short Reset (SSR) design is all about speeding up the trigger reset cycle.
LanTac’s connector geometry:
Shortens the reset distance, so the trigger re-engages earlier in its forward travel 80 Lower+3lantac-usa+3MidwayUSA+3
Lets you feel and hear a crisper, more positive reset, ideal for timed drills and defensive training
Supports faster follow-up shots and better rhythm during rapid strings of fire
For competition shooters, defensive users, and serious range trainers, a shorter reset translates into real-world performance—particularly when you’re working on split times and transitions.
Black Nitride Finish & Stainless Steel Construction
While some listings highlight the underlying stainless steel construction, this specific model is sold with a durable Black Nitride coating by multiple retailers. harborarsenal.com+3Buds Gun Shop+34shooters.com+3
Construction & finish advantages:
High-strength stainless steel core for excellent wear resistance and long service life MidwayUSA+2GunMag Warehouse+2
Black Nitride finish enhances surface hardness and lubricity while giving a low-profile, non-reflective appearance Buds Gun Shop+24shooters.com+2
Polished engagement surfaces further reduce friction, contributing to the smoother pull and shorter reset
This is a part built to handle high round counts and serious training, not just occasional range trips.
Broad Glock Compatibility (With Important Exceptions)
The LanTac SSR 3.5 lb Trigger Disconnector 01-GP-TDISC is designed for a wide range of Glock models. MidwayUSA and other retailers list compatibility with most Gen 1–4 double-stack Glock pistols, including: MidwayUSA+2GlockStore+2
Compatible with (typical list):
9mm: Glock 17, 19, 26, 34, 47 (varies by source)
.40 S&W: Glock 22, 23, 24, 27, 35
.45 ACP / 10mm: Glock 20, 21, 29
.357 SIG / .45 GAP: Glock 31, 32, 33, 37, 38, 39
Many other standard double-stack frames across Gen 1–4, and some Gen 5 variants depending on the vendor listing 80 Lower+3MidwayUSA+3GunMag Warehouse+3
Does not fit:
Glock 42, 43, 43X, or 48 slimline models, according to multiple sources. GunMag Warehouse+1
Always verify compatibility for your exact model and generation before installation, and follow all manufacturer and gunsmithing best practices.
Important Note: LanTac and retailers clearly state that this is an aftermarket part not manufactured, authorized, endorsed, or warranted by GLOCK. “GLOCK” is a registered trademark of Glock, Inc., used only to indicate firearm compatibility. 80 Lower+3lantac-usa+3MidwayUSA+3
Drop-In Upgrade – Simple Installation for Most Users
One of the biggest advantages of the LanTac SSR disconnector is how easy it is to install:
Designed as a drop-in replacement for the OEM Glock connector MidwayUSA+2GlockStore+2
Requires normal Glock field-stripping and removal of the trigger mechanism housing
No permanent modifications to the frame or fire control system
If you’re familiar with basic Glock detail stripping, installing this connector is typically a straightforward DIY upgrade. If not, a qualified gunsmith can install and function-check it quickly and inexpensively.
Made in the USA with Precision Manufacturing
LanTac USA emphasizes that the SSR 3.5 lb disconnector is manufactured in the USA using high-quality materials and precise machining. 80 Lower+3lantac-usa+3GunMag Warehouse+3
Quality highlights:
Precise manufacturing tolerances help ensure reliable operation and consistent trigger feel 4shooters.com+1
Designed for long-term reliability, even under heavy training use
Backed by LanTac’s reputation for performance-oriented AR and pistol components
If you’re tuning a defensive pistol, duty weapon (where policies allow), or competition Glock, this kind of consistency matters.
Ideal for Competition, Training & Upgraded EDC Builds
The LanTac SSR Super Short Reset 3.5 lb Trigger Disconnector is a great match for shooters who:
Want a cleaner, lighter, and more predictable trigger pull than stock
Focus on speed and control in competition or defensive pistol classes
Are building a custom Glock or Glock-compatible pistol and want to skip the “mushy factory connector” stage entirely 80 Lower+2GlockStore+2
Paired with good fundamentals and quality ammunition, a better connector can help you realize more of your Glock’s inherent accuracy and performance potential.
Key Features & Specifications – LanTac SSR Super Short Reset 3.5 lb Disconnector
If you’re looking to upgrade your Glock with a lighter, smoother 3.5 lb trigger pull and a super short, tactile reset—without committing to a full aftermarket trigger shoe and bar—the LanTac USA SSR Super Short Reset Trigger Disconnector 01-GP-TDISC (UPC 712038709625) is a proven, Made-in-USA connector that delivers big performance gains from a small, easy-to-install part.
The End
