MDT Spare Round Holder — M-LOK, Black (Holds 2 Rounds)
Model: 105248-BLK / 105248BLK • UPC: 682157403004 • Mount: M-LOK® • Capacity: (2) spare cartridges • Material: Polymer • Color: Black
Keep two extra rounds exactly where you need them—on the rifle. The MDT Spare Round Holder (M-LOK, Black) is a lightweight, low-profile accessory that secures two cartridges on your chassis or handguard for rapid top-offs and immediate access during hunts, PRS/NRL stages, and cold-bore shots. Built from durable polymer and designed around the M-LOK interface, this two-round caddy mounts in seconds and keeps ammo safe from snags while remaining instantly accessible with your support hand.
Why Shooters Love This Two-Round Caddy
Fast Access = Faster Follow-Ups: Stash two “ready rounds” on the rifle so you can recover from a miss, top off the chamber, or handle a make-up shot without digging in pockets or packs.
Ultra-Light & Low Profile: Tough polymer construction adds minimal weight and virtually no bulk to your precision rifle build.
M-LOK Anywhere: Mounts to any M-LOK slot on your forend or chassis—run it left, right, or underside to match your workflow.
Secure, Snag-Resistant Retention: Optimized tension holds cartridges firmly during movement while allowing quick, one-hand retrieval.
Universal Utility: Ideal for hunters, PRS/NRL competitors, spotter/coach rigs, and range rifles that need a clean, simple spare-round solution.
Key Features & Specs
Brand: MDT
Product: Spare Round Holder (2-round)
Mounting Interface: M-LOK®
Material: Durable polymer body
Color/Finish: Black
Capacity: Holds two rifle cartridges (varies by cartridge diameter; see tips below)
Dimensions/Weight: Compact, featherweight footprint designed for competition and field use
Model Numbers: 105248-BLK / 105248BLK
UPC: 682157403004
Note: Cartridges shown in images are for display only and are not included.
Compatibility & Fit Tips
Cartridge Families: Works with common precision and hunting rounds (e.g., 6.5 Creedmoor, .308 Win/7.62, 6mm Creedmoor, .243, .270, .30-06, .300 Win Mag, etc.). Actual fit/retention may vary with case taper and diameter—test your specific load.
Platforms: Any rifle/chassis/handguard with M-LOK slots—MDT chassis, many precision forends, and modern hunting stocks.
Orientation: Mount for support-hand access (right-hand shooter: left side; left-hand shooter: right side). Underside mounting is popular for prone work.
Real-World Benefits
No-Fumble Top-Offs: Keep dope-branded rounds ready for wind changes or stage surprises.
Stage Efficiency: Save seconds in PRS/NRL—grab a spare and single-feed without breaking position.
Hunting Practicality: Quiet, snag-free access for follow-up shots without fishing through pockets or ammo cuffs.
Clean Rifle Setup: Minimalist design keeps your forend uncluttered and cable-free.
Quick Installation (M-LOK)
Choose Location: Pick an M-LOK slot reachable by your support hand from prone/bench.
Attach Hardware: Insert T-nuts and screws through the holder into the M-LOK slots.
Align & Tighten: Torque to M-LOK spec (~35 in-lb) unless otherwise specified by MDT.
Function Check: Insert two cartridges and test retrieval from your shooting positions.
Best Practices & Setup Ideas
Mark Your Rounds: Use it for “dialed” follow-up rounds or a different bullet weight—label the base or keep tips color-coded.
Weather & Dust: Wipe the holder after wet or dusty trips; a dry silicone cloth keeps grit from building up.
Positioning: For barricade work, side mounting near the magwell or mid-rail is popular; for prone, underside forward of the mag can be faster.
Care & Maintenance
Wipe with a damp cloth; avoid aggressive solvents that can degrade polymers.
Check screw torque periodically—especially after travel or heavy recoil sessions.
Inspect retention tension if switching between small- and large-diameter cartridges.
SEO Highlights (Quick Copy)
MDT Spare Round Holder — M-LOK, black polymer, 2-round caddy
Fits M-LOK chassis/handguards; quick-access spare cartridges for hunting and PRS/NRL
Model 105248-BLK / 105248BLK, UPC 682157403004
Lightweight, low-profile, secure retention; left/right/underside mounting options
Frequently Asked Questions
Q: Which cartridges fit best?
A: Most short- and long-action hunting/precision rounds (6.5 CM, .308, .270, .30-06, .300 WM, etc.) fit. Test your specific brass for retention and orientation.
Q: Will it work on non–M-LOK forends?
A: This model mounts via M-LOK only. For KeyMod or proprietary systems, use an adapter or an alternative MDT mount.
Q: Can it hold belted magnums securely?
A: Yes, many users run .300 Win Mag and similar rounds; verify tension with your cartridge profile and confirm under movement.
Q: Left-handed friendly?
A: Absolutely—mount on the side you can reach fastest with your support hand.
Safety Reminder
Always follow firearm safety rules. Keep your chamber clear when configuring or practicing indexing with live rounds. Verify reliable retention before field or match use.
Streamline your rifle workflow and keep critical ammo exactly where you need it with the MDT Spare Round Holder, Black, Polymer, M-LOK (Holds 2 Rounds) — 105248-BLK / 105248BLK, UPC 682157403004. A simple, lightweight upgrade that pays dividends on the clock and in the field.
The End
