MILITEC-1® Synthetic Grease – High-Pressure, High-Temp Lubricant
Extreme Load Protection • Anti-Wear & Anti-Seize • Corrosion Defense • Firearms, Blades, Tools & Machinery
Product Name: MILITEC-1 GREASE • Type: Premium synthetic grease / metal conditioner
Engineered for the toughest contact points on your gear, MILITEC-1® Grease delivers long-lasting, high-pressure lubrication that clings where oils can’t. From firearm locking lugs and slide rails to folding-knife detents, fishing reels, door hinges, and shop machinery, this non-migrating synthetic grease forms a durable boundary layer that reduces friction, prevents galling and seizing, and guards against rust—even under heat, cold, water, or heavy fouling. If your mission is smooth, consistent operation with fewer reapplications, MILITEC-1 Grease is the bench-ready solution.
Why Choose MILITEC-1 Grease
High-Pressure, Anti-Wear Film
Built to handle extreme contact stress (cams, rails, lugs, pins), the grease establishes a robust boundary layer that reduces metal-to-metal wear and smooths operation.
Stays Put Under Heat & Recoil
A temperature-stable formula resists thinning and sling-off on fast-moving parts, keeping lubrication exactly where you applied it.
Corrosion & Moisture Defense
Seals out humidity, sweat, and salt spray—ideal for EDC carry, marine environments, and long-term storage.
Low-Migration, Low-Mess
Thicker than oil and non-tacky, MILITEC-1 Grease won’t drip into triggers or optics; it won’t attract grit the way heavy, sticky formulas do.
Multi-Platform Versatility
Excellent on firearms, knives, fishing reels, tools, hinges, locks, automotive and shop equipment—one product for all the high-load friction points in your kit.
Always follow your manufacturer’s maintenance guidelines and torque specs.
Key Features at a Glance
Type: Synthetic, high-pressure grease / metal conditioner
Benefits: Anti-wear, anti-seize, corrosion inhibition, water resistance, temperature stability
Finish-Safe: Compatible with common blued, nitrided, parkerized, stainless, anodized surfaces*
Applications: Firearms (lugs/rails), folders (pivots/detents), tools, reels, hinges, small machinery
*Spot test on specialty coatings, wood finishes, or rubber.
Where MILITEC-1 Grease Excels (Firearms & Tools)
Pistol & Carbine Slide Rails: Long-wearing film for smoother cycling and reduced rail wear.
Locking Lugs & Barrel Hoods: High-load protection where parts lock/unlock under pressure.
Bolt Carriers & Cam Pins: Anti-galling lubrication that resists carbon adhesion.
Folding Knife Pivots/Detents: Buttery action with micro-application that won’t migrate.
Reels, Hinges, & Locks: Quiet operation and corrosion defense in damp or marine conditions.
How to Use (Quick Guide)
Unload/De-energize Equipment: Verify firearms are unloaded; disconnect power on tools.
Clean First: Remove old lubricant and debris for best bonding.
Apply Sparingly: Use a thin film on rails, lugs, pins, and high-friction faces. A little goes a long way.
Work the Mechanism: Cycle the action to distribute evenly.
Wipe Excess: Leave just a light visible sheen—this helps repel grit and fouling.
Top Off as Needed: Reapply after heavy rain, high round counts, or solvent baths.
Pro Tip: Combine MILITEC-1 Oil on lower-load internals with MILITEC-1 Grease on high-pressure bearing surfaces for a complete lubrication system.
Storage & Safety
Store sealed, away from heat and open flame.
Use in a well-ventilated area; avoid contact with eyes and prolonged skin exposure.
Keep out of reach of children. Dispose of used rags responsibly.
Frequently Asked Questions
Q: Grease or oil—which should I use?
A: Use grease on high-load, high-friction surfaces (rails, lugs, pivots) where staying power matters. Use oil on light-duty or tight-tolerance parts and for rust-wipe protection.
Q: Will it attract dust and carbon?
A: MILITEC-1 Grease is low-migration and non-tacky. Applied thinly, it resists grit build-up better than heavy, sticky greases.
Q: Safe for cold-weather use?
A: Yes—its temperature stability keeps operation consistent in cold or heat. Apply very sparingly in extreme cold.
Q: Can I use it on polymer or wood?
A: Apply to metal contact points. Wipe off any excess that contacts polymer, rubber, or wood; spot test if unsure.
Q: Does it prevent rust?
A: Yes—the film provides corrosion resistance. For exterior wipe-down, pair with a light coat of MILITEC-1 Oil.
SEO Highlights (Quick Scan)
MILITEC-1 Grease synthetic high-pressure lubricant for firearms, knives, tools, and machinery
Reduces friction, wear, and galling; stays put under heat and recoil
Corrosion-resistant, low-migration, and temperature-stable formula
Ideal for slide rails, locking lugs, pivots, cam pins, reels, hinges, and more
Works alongside MILITEC-1 Oil for complete maintenance
The Bottom Line
MILITEC-1® Grease is the stick-where-you-need-it solution for high-load parts that demand dependable lubrication and corrosion defense. Apply a thin film to critical contact points and enjoy smoother operation, longer service life, and fewer reapplications—from the bench to the backcountry and everywhere in between.
The End
