MPA Bolt Action Scope Mount – 34mm Rings, 1.125" Height, 0 MOA (BAMOUNT-34-1125)

Model/SKU: BAMOUNT-34-1125 • Alt SKU: BAMOUNT341125 • UPC: 866803040175
Ring Diameter: 34mm • Centerline Height: 1.125" • Cant: 0 MOA • Platform: Bolt-action rifles / precision carbines

Lock your optic down with confidence. The MPA (MasterPiece Arms) Bolt Action Mount with 34mm rings, 1.125" centerline height, and 0 MOA cant is engineered for rock-solid retention, precise alignment, and repeatable zero on modern precision rifles. Machined to tight tolerances and finished to stand up to match abuse and field conditions, this one-piece mount delivers the rigidity and geometry that long-range shooters rely on—whether you’re building a PRS rig or dialing a hunting rifle for do-all duty.

Why This 34mm / 1.125" / 0 MOA Mount

• True 34mm precision: Securely clamps today’s popular 34mm tube optics (LPVOs and long-range scopes) with even ring pressure for consistent tracking and glass integrity.

• Ideal 1.125" height: A versatile 1.125" optical center height that clears most barrels/handguards and pairs well with modern chassis comb heights for a comfortable, heads-up position.

• Neutral 0 MOA cant: Run your full internal elevation without added bias—perfect for mid-range zeros, short-to-mid hunting shots, or when your scope already has ample elevation travel.

• One-piece rigidity: Monolithic base improves alignment between rings, minimizes stress on the scope tube, and helps maintain zero through recoil, transport, and temperature swings.

• Torque-friendly hardware: Quality fasteners and captive cross-bolts* accept precise torque to spec, aiding repeatable returns after removal.
  *Hardware style may vary slightly by lot—always follow the included MPA torque guidance.

Key Features at a Glance

• Ring Size: 34mm

• Centerline Height: 1.125" (approx. 28.6 mm)

• Cant / Slope: 0 MOA

• Configuration: One-piece bolt-action scope mount

• Use Cases: PRS/NRL, field/hunting rifles, zero-repeatable training setups

• Material/Finish: Precision-machined, duty-grade finish (corrosion and abrasion resistant)

• Model / UPC: BAMOUNT-34-1125 / 866803040175 (Alt SKU BAMOUNT341125)

Performance You’ll Notice

• Repeatable zero: Rigid chassis + even clamping = fewer shifts after travel or hard strings.

• Cleaner eye alignment: 1.125" height works with adjustable cheek risers and most 56 mm objective bells (verify cap & rail clearance).

• True tracking support: Proper ring alignment helps your scope maintain accurate dial-ups and consistent return to zero.

Ideal Pairings

• Precision chassis rifles: MDT, MPA, KRG, XLR, and similar systems with adjustable combs.

• Hunting/field .308/.300/.65 rigs: Neutral 0 MOA for flexible zeros from 100 to 200 yards without over-canting.

• Match guns with tall turrets: When your optic’s internal elevation is generous, 0 MOA keeps your mid-range dialing intuitive.

Mounting Tips (Best Practices)

1. Degrease & dry all mating surfaces and screws.

2. Base install: Set on a clean rail; lightly seat cross-bolts, then torque to manufacturer spec.

3. Scope leveling: Set eye relief at max magnification; level reticle to rifle cant bubble.

4. Cap torque: Tighten in an “X” pattern in small increments; verify even ring gaps and follow MPA’s torque spec.

5. Witness-mark: Paint-pen fasteners for at-a-glance checks after range sessions.

FAQs

Q: Will 1.125" clear a 56 mm objective on my rifle?
A: In most cases, yes—especially on flat rails and with standard scope caps. Always measure your barrel/rail height and cap thickness to confirm.

Q: Why choose 0 MOA over 20 or 30 MOA?
A: 0 MOA is ideal when your scope has ample elevation travel or when you want a close-range zero without offset. For extreme ELR, consider a canted base.

Q: Is this mount quick-detach?
A: This model focuses on maximum rigidity and repeatability with torqued cross-bolts rather than QD levers.

Specifications (Summary)

• Brand: MasterPiece Arms (MPA)

• Product: Bolt Action Scope Mount

• Rings: 34 mm

• Height: 1.125" centerline

• Cant: 0 MOA

• Construction: One-piece precision mount

• SKU / UPC: BAMOUNT-34-1125 / 866803040175 (Alt: BAMOUNT341125)

SEO Highlights (What Shoppers Search)

• MPA 34mm scope mount 1.125" height

• 0 MOA bolt-action one-piece mount

• MasterPiece Arms precision scope rings

• BAMOUNT-34-1125 / BAMOUNT341125

• UPC 866803040175 MPA mount for PRS/NRL

Meta Title (SEO)

MPA Bolt Action Mount – 34mm Rings, 1.125" Height, 0 MOA | BAMOUNT-34-1125 | UPC 866803040175

Meta Description (SEO)

Secure your optic with the MPA Bolt Action Mount—34mm rings, 1.125" centerline height, 0 MOA cant, and one-piece rigidity for repeatable zero on precision rifles. SKU BAMOUNT-34-1125, UPC 866803040175.

Structured Data (JSON-LD)

json
Copy code
{
  "@context": "https://schema.org",
  "@type": "Product",
  "name": "MPA Bolt Action Mount – 34mm, 1.125\" Height, 0 MOA",
  "sku": "BAMOUNT-34-1125",
  "mpn": "BAMOUNT341125",
  "gtin12": "866803040175",
  "brand": { "@type": "Brand", "name": "MasterPiece Arms" },
  "category": "SportingGoods",
  "description": "One-piece precision bolt-action scope mount with 34mm rings, 1.125-inch centerline height, and 0 MOA cant for PRS, hunting, and training rifles.",
  "additionalProperty": [
    { "@type": "PropertyValue", "name": "Ring Diameter", "value": "34 mm" },
    { "@type": "PropertyValue", "name": "Centerline Height", "value": "1.125 in" },
    { "@type": "PropertyValue", "name": "Cant", "value": "0 MOA" },
    { "@type": "PropertyValue", "name": "Configuration", "value": "One-piece bolt-action mount" }
  ],
  "itemCondition": "https://schema.org/NewCondition"
}

Rigid, repeatable, and purpose-built—the MPA 34mm, 1.125" 0 MOA Bolt Action Mount delivers the alignment and stability your precision optic deserves. The End