Nightstick LGLML1 M-LOK Mount | Fits Nightstick LGL-150 / LGL-160 / LGL-170 Weapon Lights | 1.30" M-LOK Rifle Handguard | Black Anodized Aluminum | Model: LGLML1 | UPC: 017398807647

Upgrade your rifle’s lighting setup with the Nightstick LGLML1 M-LOK Mount, purpose-built to fit the Nightstick LGL-150, LGL-160, and LGL-170 weapon lights. Machined from black anodized aluminum and designed around the 1.30" M-LOK interface standard, this rugged, low-profile mount locks your light securely to modern free-float handguards while keeping weight to an absolute minimum. Whether you’re building a home-defense carbine, a duty rifle, or a competition blaster, the LGLML1 delivers rock-solid attachment, optimal positioning, and dependable performance.

Why the Nightstick LGLML1 is a Smart Upgrade

• Direct M-LOK Compatibility: Installs to any M-LOK rifle handguard with a 1.30" interface footprint—no adapters, no fuss.

• Purpose-Built Fit: Precisely engineered for Nightstick LGL-150, LGL-160, and LGL-170 weapon lights to ensure proper alignment, clearance, and clamping force.

• Lightweight & Low Profile: Streamlined geometry keeps your light tucked in close to the rail for better balance, reduced snag risk, and improved rifle handling in tight spaces.

• Duty-Grade Construction: 6061-T6 style aluminum (anodized black) offers excellent strength-to-weight with corrosion and wear resistance for hard use in any climate.

• Repeatable Zero for Your Light: Secure clamping and non-slip interface help maintain consistent beam index after hard recoil cycles or field knocks.

• Ambidextrous Setup: Mount forward-left or forward-right to match your support-hand technique, tape switch routing, and sling placement.

Key Features at a Glance

• Compatibility: Nightstick LGL-150 / LGL-160 / LGL-170 weapon lights

• Rail Standard: M-LOK rifle handguards (1.30" interface width)

• Material: Black anodized aluminum for durability and corrosion resistance

• Profile: Low-profile, lightweight mount with snug, inboard light placement

• Hardware: Includes M-LOK nuts/bolts (use a torque driver for best results)

• Finish: Matte black to blend with most rails and reduce signature

• Model: LGLML1

• UPC: 017398807647

Performance You Can Count On

• Secure Lock-Up: Precision-machined tolerances, quality hardware, and the M-LOK wedge effect deliver solid, shift-free attachment under recoil.

• Optimized Ergonomics: Inboard light placement supports natural thumb activation and clean tape-switch routing, keeping controls within easy reach.

• Balanced Rifle Handling: Minimal added mass at the muzzle end helps maintain fast transitions, steady holds, and less fatigue during long training blocks.

Ideal Use Cases

• Home & Property Defense: Keep your rifle light tight to the rail for fast activation and minimal snag risk in hallways, doorways, and vehicles.

• LE / Security Duty Carbines: Durable, repeatable mounting for officers who need reliable illumination in all weather and lighting conditions.

• Competition & Training: Streamlined profile lets you attack barricades and ports without your light catching the edge.

• Hog/Predator Night Hunts: Stable light placement helps you track eyes and movement while maintaining a consistent beam index.

Installation Tips (Quick Start)

1. Prep the Rail: Ensure your M-LOK handguard slots are clean and free of debris.

2. Position the Mount: Choose the slot that gives you ideal switch reach and sling clearance.

3. Attach Hardware: Insert M-LOK T-nuts and bolts; hold the mount level as you snug them down.

4. Torque to Spec: Tighten to typical M-LOK torque (check rail/light maker guidance) for maximum retention.

5. Mount the Light: Install your LGL-150/160/170, confirm alignment, and function-check activation.

Routing & Setup Suggestions

• Tape Switch Management: Use rail covers or channels to run the lead cleanly; add a small zip tie or cable clip for strain relief.

• Sling & Hand Stop Clearance: Leave space so your sling and support-hand index don’t block the beam or activation pathway.

• Suppressor/Brake Considerations: Angle the light to minimize muzzle shadow while keeping lens away from hot gas flow.

Care & Maintenance

• Periodic Retorque: After the first range session, verify bolt tension—then check every few hundred rounds or after hard impacts.

• Keep It Clean: Wipe off carbon and dust; a drop of thread treatment on hardware can help long-term retention.

• Inspect Contact Surfaces: Ensure M-LOK T-nuts fully rotate and seat against the inner rail surface for proper engagement.

Frequently Asked Questions

Q: Will the LGLML1 work with other brands of lights?
A: The LGLML1 is specifically designed around the Nightstick LGL-150/160/170 footprint. Some lights may fit with third-party rings/adapters, but Nightstick compatibility offers the best alignment and retention.

Q: What if my rail is KeyMod or Picatinny only?
A: The LGLML1 is an M-LOK-specific mount. For other rail standards, use an appropriate adapter or a mount made for your interface.

Q: Can I mount it on the right side for left-handed shooting?
A: Yes. The low-profile design supports left or right mounting to match your hand dominance and switch style.

Q: Does it include hardware?
A: It typically includes M-LOK nuts and bolts for installation. Always verify package contents and follow torque guidance from your handguard manufacturer.

SEO Highlights (Buyer Fast Facts)

• Nightstick LGLML1 M-LOK mount for LGL-150 / LGL-160 / LGL-170 weapon lights

• 1.30" M-LOK rifle handguard compatibility; black anodized aluminum construction

• Low-profile, lightweight light mount for defense, duty, and competition builds

• Secure, repeatable attachment with ambidextrous placement options

• Model LGLML1, UPC 017398807647

Dial in your rifle light the right way with the Nightstick LGLML1—a tough, purpose-built M-LOK mount that keeps your LGL-150/160/170 exactly where you want it: tight, reliable, and ready to work.
"The End"