Odin Works ATLAS 9 Muzzle Brake — 9mm | 1/2×28 Thread | Stainless Steel | SKU MB-ATLAS-9-28 (MBATLAS928) | UPC 857392006895
Tunable Recoil Control for 9mm Carbines & PCCs
Bring competition-grade control to your 9mm build with the Odin Works ATLAS 9 Muzzle Brake. Purpose-built for 9×19 platforms threaded 1/2×28, this premium stainless steel brake uses Odin’s ATLAS concept—an adjustable outer sleeve around a precision-ported core—to help you tune muzzle rise and recoil for your gun, ammo, and stance. Whether you’re running a PCC in USPSA/IDPA, a suppressed-adjacent training setup (device swapping where legal), or a hard-use range carbine, the ATLAS 9 delivers fast sight recovery in a sleek, heat-resistant package.
Caliber: 9mm (9×19) • Thread: 1/2×28 • Material: Stainless Steel • Finish: Natural stainless (machined) • Model / SKU: MB-ATLAS-9-28 / MBATLAS928 • UPC: 857392006895
Why Shooters Choose the ATLAS 9
Adjustable, Low-Profile Brake
The ATLAS system features an outer sleeve you can rotate to fine-tune gas direction from the ported core. Dial the brake to your recoil pattern for flatter tracking and faster splits—without bulky add-ons.
Stainless Steel Durability
Machined from corrosion-resistant stainless steel, the brake stands up to heat, carbon, and weather while maintaining crisp port geometry for consistent performance.
PCC & Carbine Ready
Optimized for 9mm barrels threaded 1/2×28, the ATLAS 9 integrates seamlessly with today’s PCCs and AR-9 builds, as well as other 9×19 carbines that use the same thread standard.
Clean Lines, Easy Maintenance
The sleek exterior sleeve hides carbon buildup better than open baffle faces. Break it down for quick wipe-downs and keep your front end looking and running clean.
Note: Always confirm thread pitch (1/2×28 for most 9mm AR barrels) and bore alignment before installation or firing.
Key Features at a Glance
Caliber-Specific Design: 9mm (9×19) brake for efficient gas use
1/2×28 Threads: Widely compatible with modern 9mm barrels*
Stainless Steel Construction: Heat- and corrosion-resistant longevity
ATLAS Tuning Sleeve: Adjust port effect for custom recoil control
Slim, Modern Profile: Competition-ready without extra bulk
Model / UPC: MB-ATLAS-9-28 (MBATLAS928) / 857392006895
*Compatibility: Designed for 9mm bores. Do not use on .30-cal or .223/5.56 barrels even if thread pitch matches.
Real-World Benefits
Faster Follow-Up Shots
By venting gas to counter your muzzle’s natural climb, the ATLAS 9 helps keep your dot or irons on the A-zone through rapid strings.
Tuned to Your Load
From soft-shooting 115gr practice to snappy 124/147gr match loads, the ATLAS sleeve lets you fine-tune to your ammo and buffer setup.
Confidence Under the Timer
Predictable tracking equals confidence. Expect repeatable sight return and more stable transitions for USPSA/Steel Challenge-style stages.
Ideal Use Cases
Pistol-Caliber Carbine (PCC) Competition
Range Training & High-Volume Practice
Home & Property Defense Builds (where brakes are preferred)
Agency/Club Carbines needing consistent recoil behavior
Installation Overview (High Level)
Verify Clear: Ensure the firearm is unloaded.
Confirm Specs: Barrel is 9mm and 1/2×28—check threads and bore.
Remove Old Device: Clean muzzle shoulder and threads.
Time & Tune: Install per torque recommendations; use appropriate shimming or timing method as required by your setup. Rotate the ATLAS sleeve to fine-tune recoil control.
Final Checks: Verify clearance, bore concentricity, and secure fit before live fire.
If you’re not experienced with muzzle devices, consult a qualified armorer or gunsmith.
Care & Maintenance
Carbon Wipe-Down: After range days, wipe ports and sleeve.
Thread Care: Keep threads clean; apply a small amount of high-temp anti-seize if desired.
Periodic Inspection: Check torque and sleeve position after transport or high-round counts.
Frequently Asked Questions
Q: Will this work on a 9mm handgun barrel?
A: The ATLAS 9 is primarily intended for carbine/PCC platforms with sufficient clearance and 1/2×28 threads. Most handgun applications are not practical due to length/weight and holster fit.
Q: Can I use it with a suppressor?
A: The ATLAS 9 is a muzzle brake, not a suppressor mount. If you plan to run a can, verify your can’s required mount and do not stack devices unless the manufacturer explicitly approves.
Q: Does it require a crush washer or shims?
A: Follow your barrel manufacturer’s guidance. Many builders prefer shims for precise timing. Ensure the ATLAS sleeve remains adjustable after timing.
Q: Will it reduce flash?
A: Brakes primarily manage recoil and muzzle rise. For flash reduction, consider a dedicated flash hider or hybrid device.
Technical Specifications (General)
Caliber: 9×19 (9mm)
Thread Pitch: 1/2×28 (verify before install)
Material: Stainless Steel
Finish: Natural stainless / machined
Design: Multi-port ATLAS adjustable sleeve over ported core
Overall Use: PCC/Carbine recoil and rise mitigation
SKU / UPC: MB-ATLAS-9-28 (MBATLAS928) / 857392006895
Small dimensional details (length/weight) can vary slightly between production runs. Always check the current product insert for the latest specs.
SEO-Rich Highlights & Buyer Keywords
Odin Works ATLAS 9 muzzle brake, 9mm, 1/2×28 stainless
Adjustable sleeve brake for PCC / AR-9 recoil & muzzle rise control
Stainless steel 9mm brake with tunable gas management
Competition-ready muzzle device for USPSA/Steel Challenge
SKU MB-ATLAS-9-28 (MBATLAS928), UPC 857392006895
Meta Title (SEO)
Odin Works ATLAS 9 Muzzle Brake — 9mm, 1/2×28, Stainless | MB-ATLAS-9-28
Meta Description (SEO)
Control recoil and muzzle rise on your 9mm PCC with the Odin Works ATLAS 9 muzzle brake. 1/2×28 stainless steel, adjustable sleeve tuning, competition-ready performance. SKU MB-ATLAS-9-28, UPC 857392006895.
Structured Data (Product Schema JSON-LD)
Responsible Use Reminder
Follow all local, state, and federal laws. Verify thread pitch and bore alignment before firing. After installation, conduct a function and safety check and re-torque as needed following break-in.
The End
