Odin Works Extended Magazine Release — AR-15 | Cerakote® Flat Dark Earth, 6061 Aluminum | Model ACCXMRFDE | UPC 856205005070
Faster, More Confident Mag Changes—Now in FDE
Elevate your reloads and your rifle’s look with the Odin Works Extended Magazine Release for AR-15 platforms, finished in rugged Cerakote® Flat Dark Earth (FDE). Precision-machined from 6061 aluminum, this low-profile, extended paddle enlarges the contact surface so your thumb finds the button faster and with less grip shift, enabling quicker, more consistent magazine drops in training, competition, and defensive use. The ACCXMRFDE keeps the clean, modern lines Odin Works is known for while adding a mission-ready FDE tone that pairs perfectly with desert and earth-tone builds.
Designed to fit Mil-Spec AR-15 lowers, the XMR installs in minutes using your existing mag catch hardware and preserves factory mag catch geometry for reliable lock-up with quality STANAG magazines. Add performance, add style—without adding unnecessary bulk or weight.
Key Features at a Glance
Extended Control Surface: Enlarged, contoured paddle enables no-look, glove-friendly releases
Material: Lightweight, durable 6061 aluminum
Finish: Cerakote® Flat Dark Earth (FDE) for abrasion and corrosion resistance
Low-Profile Design: Enhanced access without snag-prone protrusions
Mil-Spec Compatibility: Fits most AR-15 lowers with standard magazine catch assemblies
Straightforward Install: Reuses your factory mag catch shaft & spring; basic tools only
Model / UPC: ACCXMRFDE / 856205005070
Why Choose the Odin Works XMR (Extended Magazine Release)
Speed You Can Measure
The larger, ergonomic surface shortens the reach to the release and reduces grip readjustment. That means faster reloads and tighter stage times in 3-Gun/USPSA-style carbine matches and smoother manipulations under stress.
Positive, Repeatable Press—With or Without Gloves
A textured, extended face improves tactile feedback for cold-weather and duty use, helping you press decisively even when your hands are wet, sweaty, or gloved.
Duty-Grade Coating, Designer Color
Cerakote® FDE resists chemicals, sweat, moisture, and field abrasion while adding a premium finish that complements FDE receivers, handguards, stocks, and accessories.
Lightweight and Balanced
The 6061 aluminum construction adds minimal weight at the control point, preserving your rifle’s front-to-back balance.
Ideal Use Cases
Competition Carbines: Shave tenths off reloads; improved indexing reduces fumbles
Defensive/Duty Builds: Reliable, glove-friendly control surface for stressful conditions
Training & High-Rep Classes: Reinforce consistent manual of arms across drills
Custom AR Builds: FDE colorway ties together two-tone or full-earth-tone rifles
Installation Overview (Quick Guide)
Ensure Safe & Clear: Remove magazine and verify an empty chamber.
Disassemble Button: Depress and unthread the mag catch from the factory button.
Install Odin Works XMR: Position the ACCXMRFDE, align threads, and re-engage the catch.
Function Check: Insert an empty magazine to confirm positive lock; press to verify smooth release.
Final Fit: Ensure the button clears the receiver/trigger guard at full travel with no interference.
Tip: Use a non-marring punch and a receiver block. Follow safe gunsmithing practices throughout.
Compatibility Notes
Fits: Most Mil-Spec AR-15 lower receivers using standard mag catch assemblies
Magazines: Optimized for STANAG-pattern magazines and quality equivalents
Not Intended For: AR-10/LR-308 or proprietary lower receivers unless stated by the manufacturer
Technical Specifications
Product Type: Extended Magazine Release (XMR)
Platform: AR-15 (Mil-Spec)
Material: 6061 aluminum
Finish: Cerakote® Flat Dark Earth (FDE)
Install: Replaces standard mag release button; uses existing catch/rod/spring
Model Number: ACCXMRFDE
UPC: 856205005070
Minor cosmetic/weight variations may occur by lot. Refer to packaging for any updated specs.
Frequently Asked Questions
Q: Will it cause accidental mag drops because it’s larger?
A: The XMR is low-profile and contoured to minimize snag risk. Proper sling/gear management and indexing prevent unintended presses.
Q: Does it work with ambidextrous mag release kits?
A: Many ambi kits use standard-thread catches. Verify your ambi mechanism’s compatibility and clearance before installation.
Q: Do I need new hardware?
A: Typically no. Reuse the factory mag catch shaft and spring unless worn or out of spec.
Q: Will the FDE match my other parts?
A: Cerakote® FDE pairs well with most FDE anodized/cerakoted components, though slight tone differences can occur between brands/batches.
SEO-Rich Highlights & Buyer Keywords
Odin Works Extended Magazine Release for AR-15
Cerakote FDE extended mag button, 6061 aluminum
Faster reloads, glove-friendly, low-profile design
Mil-Spec compatibility, easy installation
Model ACCXMRFDE, UPC 856205005070
Meta Title (SEO)
Odin Works Extended Magazine Release — AR-15, Cerakote FDE, 6061 Aluminum | ACCXMRFDE
Meta Description (SEO)
Speed up reloads and complete your FDE build with the Odin Works Extended Magazine Release for AR-15. Cerakote FDE finish, 6061 aluminum construction, Mil-Spec compatibility, and easy installation. Model ACCXMRFDE, UPC 856205005070.
Structured Data (Product Schema JSON-LD)
Responsible Use Reminder
After installation, perform a full function check with empty and loaded magazines. Confirm positive lock and release and verify there’s no interference with your trigger guard, sling, or gear. Follow all local, state, and federal laws and practice safe handling at all times.
The End
