Odin Works 02 Lite AR-10 Forend — 17.50" M-LOK® | Black Aluminum | Mounting Hardware Included | SKU F17MLO2308206 (aka F17MLO23082.06) | UPC 857116007061

Lightweight Reach, Free-Float Precision, Built for Big-Frame Performance

Give your .308/6.5CM build the front-end advantage it deserves with the Odin Works 02 Lite AR-10 M-LOK® Forend (17.50"). Machined from lightweight black aluminum, the 02 Lite delivers a long, rigid, free-float platform that supports precision shooting while keeping ounces off your rifle. The extended 17.50" length provides generous real estate for bipods, barricade stops, hand stops, sling QD cups, lights, and switch management—all using the M-LOK® interface for clean, snag-free mounting. Shipped with mounting hardware included, this handguard is ready to drop into your next AR-10 build or upgrade.

Length: 17.50" • Interface: M-LOK® • Material: Aluminum • Finish: Black • Platform: AR-10 / DPMS-pattern big-frame AR (verify compatibility) • SKU: F17MLO2308206 (also labeled F17MLO23082.06) • UPC: 857116007061

Why Choose the 02 Lite for Your AR-10?

True Free-Float for Repeatable Accuracy

By isolating the barrel from sling and barricade pressure, the 02 Lite supports consistent point of impact and tighter groups—critical for competition, hunting, and DMR roles.

Long 17.50" Reach, Better Control

The extended length lets you run an aggressive support-hand position for superior leverage, recoil management, and faster transitions. It also shields longer gas systems and gives you more M-LOK® slots where you actually need them.

Strong, Lightweight Aluminum

The carefully machined profile keeps weight down while preserving rigidity—so your rifle carries light and still feels planted on bags, bipods, and barricades.

Clean, Modern, Heat-Shedding Design

Sleek lines and generous ventilation help with heat dissipation over long strings. The low-glare black finish matches modern receivers and accessories for a unified look.

Install-Ready with Included Hardware

Comes with mounting hardware for a straightforward installation on compatible AR-10 uppers—no last-minute parts chasing.

Key Features at a Glance

• 17.50-inch AR-10 free-float handguard for precision and control

• M-LOK® slots at multiple clock positions for modular accessory placement

• Black anodized aluminum construction: light, rigid, and corrosion-resistant

• Mounting hardware included for a streamlined install*

• Slim, ergonomic profile with ample ventilation for heat management

• SKU / UPC: F17MLO2308206 (F17MLO23082.06) / 857116007061

*Package contents vary by production run; follow the included instructions and verify barrel-nut/receiver compatibility for your big-frame pattern.

Compatibility Note: “AR-10” encompasses multiple patterns (e.g., DPMS-pattern vs. Armalite). Confirm your upper receiver pattern and barrel-nut specs before purchase.

Ideal Use Cases

• Precision / DMR Builds: Long, stable handguard for bipod/bag work and optic offset accessories

• Competition: Extended reach for barricade control and fast transitions

• Hunting: Lightweight front end with space for tripod adapters and lights

• General-Purpose .308/6.5 CM Rifles: Free-float accuracy with modern accessory mounting

Installation Overview (High-Level)

1. Unload & Clear: Verify the firearm is safe.

2. Prep Upper: Remove existing handguard and muzzle device as needed; confirm gas system alignment.

3. Barrel Nut: Install and torque to spec per the included instructions; align for gas tube.

4. Fit the Forend: Slide the 02 Lite over the gas system, align with the receiver rail.

5. Secure: Tighten the included fasteners to the specified torque; verify anti-shift alignment.

6. Reassemble & Check: Reinstall muzzle device, function check, and confirm zero before live fire.

If you’re new to big-frame AR builds, a qualified armorer can ensure proper torque, alignment, and gas clearance.

Builder Tips for Best Results

• Balance Matters: Place heavier accessories (lights/bipods) closer to the receiver to keep the rifle lively.

• Cable Management: Use M-LOK® clips/channels to route pressure-switch leads cleanly.

• QD Sling Points: Add M-LOK® QD cups where your carry method demands.

• Zero Retention: Re-confirm optic/offset-sight zero after any front-end change.

• Thermal Planning: Ventilation helps—still allow cool-down intervals during high-volume strings.

Frequently Asked Questions

Q: Will this fit my specific AR-10 upper?
A: It’s designed for AR-10 / large-frame AR builds. Because patterns vary, verify DPMS/Armalite compatibility and included barrel-nut specs against your receiver.

Q: Can I tuck a suppressor under the handguard?
A: The 02 Lite is slim for ergonomics; if you plan to “shroud” a device, confirm outer-diameter clearance before purchase.

Q: Does it include a barrel nut?
A: Mounting hardware is included; exact contents (barrel nut/fasteners) can vary by lot. Check your package and instructions.

Q: What accessories work with it?
A: Any M-LOK® compliant accessory—bipods, hand stops, barricade stops, rail sections, light mounts, QD cups, and more.

Technical Specifications (General)

• Platform: AR-10 / large-frame AR (verify pattern)

• Length: 17.50 inches

• Mounting Interface: M-LOK®

• Material: Aluminum

• Finish: Black (anodized)

• Design: Free-float, slim profile

• Hardware: Included (per lot/package)

• SKU: F17MLO2308206 (F17MLO23082.06)

• UPC: 857116007061

SEO-Rich Highlights & Buyer Keywords

• Odin Works 02 Lite AR-10 forend 17.50" M-LOK

• Free-float black aluminum handguard with mounting hardware included

• Long, lightweight AR-10 rail for precision, hunting, and competition builds

• Big-frame AR M-LOK handguard — DPMS/Armalite pattern verification required

• SKU F17MLO2308206 / F17MLO23082.06, UPC 857116007061

Meta Title (SEO)

Odin Works 02 Lite AR-10 Forend — 17.50" M-LOK, Black Aluminum, Hardware Included | F17MLO2308206

Meta Description (SEO)

Upgrade your big-frame AR with the Odin Works 02 Lite 17.50" AR-10 M-LOK forend. Free-float black aluminum handguard with mounting hardware included for precision, competition, and hunting builds. SKU F17MLO2308206, UPC 857116007061.

Structured Data (Product Schema JSON-LD)

json
Copy code
{
  "@context": "https://schema.org/",
  "@type": "Product",
  "name": "Odin Works 02 Lite AR-10 Forend — 17.50\" M-LOK",
  "sku": "F17MLO2308206",
  "gtin12": "857116007061",
  "brand": {
    "@type": "Brand",
    "name": "Odin Works"
  },
  "category": "Sporting Goods > Outdoor Recreation > Shooting > Gun Parts",
  "description": "17.50-inch free-float AR-10 M-LOK handguard made from black anodized aluminum. Long, lightweight rail with mounting hardware included for precision, competition, and hunting builds.",
  "additionalProperty": [
    { "@type": "PropertyValue", "name": "Length", "value": "17.50 inches" },
    { "@type": "PropertyValue", "name": "Interface", "value": "M-LOK" },
    { "@type": "PropertyValue", "name": "Material", "value": "Aluminum" },
    { "@type": "PropertyValue", "name": "Finish", "value": "Black anodized" },
    { "@type": "PropertyValue", "name": "Design", "value": "Free-float AR-10 handguard" }
  ]
}

Responsible Build Reminder

After installation, verify torque, inspect for gas-system clearance, and function-check before live fire. Reconfirm optic and offset-sight zero, and ensure all M-LOK® fasteners are torqued to manufacturer specs with thread treatment where recommended.

The End