Odin Works Modular Safety — Ambidextrous | Cerakote® Flat Dark Earth (FDE) | Model ACCAMSFDE | UPC 857116007368

Ambidextrous Control, Mission-Ready Finish

Dial in your AR’s controls to your hand, your kit, and your mission with the Odin Works Modular Safety (Ambidextrous, Cerakote® Flat Dark Earth). The ACCAMSFDE lets you customize lever length and orientation on each side of the receiver for faster, more confident SAFE/FIRE transitions—whether you shoot right- or left-handed, switch shoulders around cover, or run a plate carrier and sling. A crisp, audible detent provides positive, repeatable engagement, while the low-profile, snag-resistant levers stay out of the way of gloves and gear. Finished in rugged FDE Cerakote®, this selector looks at home on modern earth-tone builds and shrugs off sweat, solvents, and hard training.

Built to Odin Works’ standard for Mil-Spec AR-15 lowers, the Modular Safety installs easily and plays nice with today’s popular grips and trigger guards—an ideal upgrade for competition rifles, defensive carbines, and high-rep training guns.

Key Features at a Glance

• Ambidextrous Operation: Positive, tactile SAFE/FIRE selection from either side

• Modular Lever System: Mix short and full-length levers to match your grip and kit

• Low-Profile Design: Contoured, snag-resistant levers for clean manipulations with gloves

• Crisp Detent Feel: Audible, tactile click for confident position confirmation under stress

• Durable Finish: Cerakote® Flat Dark Earth (FDE) resists abrasion and chemicals; matches modern FDE builds

• Mil-Spec Compatibility: Fits AR-15 pattern lowers using the standard selector interface

• Model / UPC: ACCAMSFDE / 857116007368

Package contents (lever shapes, screws, selector core) may vary by lot. Always check the product label for included parts and instructions.

Why Choose the Odin Works Modular Ambi Safety (FDE)

Configure Each Side—Your Way

Run a full-size lever on your firing-hand side for maximum purchase and a short/low lever on the off side to avoid interference with a chest rig or sling. The modular design adapts to you.

Faster Shoulder Transitions

Ambidextrous control simplifies weak-side shooting, vehicle work, and barricades—no grip shift required to sweep the selector on or off from either shoulder.

Positive Feedback You Can Feel

Well-tuned detent geometry gives a distinct, consistent click, so you know the selector’s position even in low light or with winter gloves.

Duty-Grade FDE Cerakote®

The Flat Dark Earth coating pairs beautifully with FDE receivers, stocks, rails, and accessories, and it’s built to handle sweat, solvents, and range abuse.

Ideal Use Cases

• Competition Carbines: Quick, confident selector changes during stage transitions

• Duty/Defensive Builds: Ambi safety for barricades, vehicles, and off-hand manipulations

• Training & High-Rep Courses: Reinforce consistent manual of arms on either shoulder

• Custom FDE Projects: Tie together an earth-tone rifle with a functional, premium control

Installation Overview (Quick Guide)

1. Verify Clear: Remove magazine; visually/physically inspect the chamber.

2. Remove Grip: Capture the selector detent & spring as you lower the grip.

3. Install Selector Core: Insert the Odin Works core through the receiver.

4. Attach Levers: Choose lever lengths/orientation; apply thread locker if recommended; torque screws per insert.

5. Reinstall Grip: Ensure the detent and spring seat correctly.

6. Function Check: With the firearm unloaded, confirm SAFE/FIRE operation and positive detent from both sides.

Follow your trigger manufacturer’s guidance—some triggers require specific selector geometry or throw angles.

Compatibility Notes

• Platform: AR-15 Mil-Spec lower receivers (standard selector bore and detent)

• Triggers: Works with most GI and drop-in triggers; verify compatibility per trigger maker

• Throw Angle: Use 90° or short-throw (if supported by your receiver/trigger). Always confirm your lower’s specification

• Large-Frame Note: Not designed for AR-10/LR-308 or proprietary lowers unless specified by the manufacturer

Technical Specifications (ACCAMSFDE)

• Type: Ambidextrous Modular Safety Selector

• Finish/Color: Cerakote® Flat Dark Earth (FDE)

• Interface: Standard AR-15 selector bore & detent

• Levers: Modular (mix short/full), ambi configuration

• Included Hardware: Selector core and lever screws (contents may vary)

• Model: ACCAMSFDE

• UPC: 857116007368

Lever shapes and hardware styles may vary by production batch. See the included insert for torque/Loctite recommendations.

Frequently Asked Questions

Q: Can I run a short lever on one side and full size on the other?
A: Yes—that’s the core advantage of the modular design. Configure each side to your ergonomics and gear.

Q: Will it work as a 45° short-throw safety?
A: Use the selector according to your lower/trigger specs. Some setups support 45°; others require 90°. Confirm before installation.

Q: Any special tools required?
A: A driver for the lever screws and basic armorer tools. Take care with the detent and spring when removing/reinstalling the grip.

Q: Is the FDE color a match for my other parts?
A: Cerakote® FDE coordinates with most earth-tone components, though minor shade differences can occur across brands/lots.

SEO-Rich Highlights & Buyer Keywords

• Odin Works Ambidextrous Modular Safety for AR-15

• Cerakote FDE ambi safety selector, modular levers (short/full)

• Crisp detent, low-profile, snag-resistant design

• Mil-Spec compatibility, competition, duty, and training ready

• Model ACCAMSFDE, UPC 857116007368

Meta Title (SEO)

Odin Works Modular Safety — Ambidextrous, Cerakote FDE, AR-15 | ACCAMSFDE

Meta Description (SEO)

Customize your AR-15 with the Odin Works Modular Ambidextrous Safety in Cerakote FDE. Modular levers, crisp detent, low-profile ergonomics, and Mil-Spec compatibility for competition, duty, and training. Model ACCAMSFDE, UPC 857116007368.

Structured Data (Product Schema JSON-LD)

json
Copy code
{
  "@context": "https://schema.org/",
  "@type": "Product",
  "name": "Odin Works Modular Ambidextrous Safety (Cerakote FDE)",
  "sku": "ACCAMSFDE",
  "gtin12": "857116007368",
  "brand": {
    "@type": "Brand",
    "name": "Odin Works"
  },
  "category": "Sporting Goods > Outdoor Recreation > Shooting > Gun Parts",
  "description": "Ambidextrous modular safety selector for AR-15 lowers with configurable lever lengths and orientations, crisp detent engagement, and Cerakote Flat Dark Earth finish.",
  "additionalProperty": [
    { "@type": "PropertyValue", "name": "Platform", "value": "AR-15 (Mil-Spec)" },
    { "@type": "PropertyValue", "name": "Finish", "value": "Cerakote Flat Dark Earth (FDE)" },
    { "@type": "PropertyValue", "name": "Operation", "value": "Ambidextrous with modular levers" }
  ]
}

Responsible Use Reminder

After installation, conduct a full function check. Confirm positive SAFE/FIRE engagement from both sides, ensure proper trigger operation, and verify screw torque/Loctite per the insert. Always follow safe handling practices and applicable laws.

The End